Viega - Seite 24

Viega 3130

Ellenbogen 90°- Rotguss- R-Gewinde, Rp-Gewinde

Armaturen mit Gewinden gemäß DINEN 10226, Teil 1, zertifiziert für Trinkwasser gemäß DIN 1988 und Gasinstallationen gemäß TRGI 2008 (beachten Sie die Hinweise zum Modell), getestet gemäß DVGW-Arbeitsblatt GW 6 und GW 393. Zertifikate: Rotguss-Gewindefittings - DVGW-Reg.-Nr. DV-7401AO2957 Gewindeverbindungen R-Außengewinde, vor Ort hergestellt - Hanf ohne Vergröberung des Gewindes ist möglich.

Viega 3092

Adapter - Gunmetal - gelötete Verbindung, Rp-Gewinde d: 12, Rp: 12

Viega 95270

Viega 2611

Sanpress Inox Reducer with SC-Contur- steel non-corroding- plug-in end, press connectionComponentsEPDM sealing element, VdS certificationd1: 42, d2: 28

Viega 2317.2

Viega 2318

Viega 2415.2

Viega 2326

Viega 2415

Viega 2415.1

Easytop Isolierschale - geeignet für Easytop Kugelhahn Modelle 2275, 2275.1, 2275.2, 2275.3, 2275.4, 2275.5, 2275.6 und den selbstverriegelnden Kugelhahn Modell5375 - Dicke der Isolationsschicht gemäß EnEV

Cap- gunmetal- Rp-threadComponentsPolygonRp: 38

Viega 1115.5

Viega 1115.5

Viega 1116XL

Viega 1116XL

Verlängerung - Gunmetal - R-Gewinde, Rp-Gewinde

Verlängerung - Gunmetal - R-Gewinde, Rp-Gewinde

Viega 3241

Schraubanschluss- Gunmetal- Rp-Gewinde- konische Dichtung

Flow-optimised press connector system for drinking water installations in acc. with DIN 1988 and DIN 50930-6 as well as heating installations, tested in acc. with DVGW worksheet W 534.Press connectorsSafe and fast processing without calibration of the pipe ends through O-ring-free press technology in all dimensions. In this way, widening or calibration of the pipe-ends becomes superfluous and reduces the assembly times. The interaction between aerodynamic radii and minimal cross-section narrowings ensure the lowest pressure losses in press systems for multilayer pipes. This allows a smaller dimensioning of drinking water installations and reduces the pipeline volume.SC-ConturAll sizes with SC-Contur – connections, which remain unpressed become visible when the system is filled. The SC-Contur is certified and fulfils the requirements of DVGW worksheet W 534, point 12.14, connectors with forced leakage.During leakage tests with water, Viega guarantees the identification of unpressed connections in the pressure range 0.1 MPa–0.65 MPa, in the case of a dry leakage test with compressed air or noble gases from 22 hPa–0.3 MPa.MarkingGreen dot on the press connectionPipesRaxofix PE-Xc/Al/PE-Xc•dimensionally stable, oxygen-proof in acc. with DIN 4726, greyRaxofix PE-Xc•flexible, blackDimensionsPress connectors and pipes•Raxofix-PE-Xc/Al/PE-Xc: d 16/20/25/32/40/50/63•Raxofix PE-Xc: d 16/20Areas of application PE-Xc/Al/PE-XcDrinking waterHeatingRainwaterCompressed airAreas of application PE-XcRainwaterDrinking waterUse of the system for application areas other than those described here must be agreed with Viega Service Center.Operating conditionsDrinking water installations•Operating temperature max. 70 °C•Operating pressure max. 1.0 MPaHeating installations•Operating temperature max. 80 °C•Operating pressure max. 1.0 MPaIrrelevant of the direction of flow, mixed installations are permitted.NoteThe DVGW test mark is only valid f