Armaturen mit Gewinden gemäß DINEN 10226, Teil 1, zertifiziert für Trinkwasser gemäß DIN 1988 und Gasinstallationen gemäß TRGI 2008 (beachten Sie die Hinweise zum Modell), getestet gemäß DVGW-Arbeitsblatt GW 6 und GW 393. Zertifikate: Rotguss-Gewindefittings - DVGW-Reg.-Nr. DV-7401AO2957 Gewindeverbindungen R-Außengewinde, vor Ort hergestellt - Hanf ohne Vergröberung des Gewindes ist möglich.

Verbindungsrohr - für WC - Kunststoffkomponenten - Lippenabdichtung DN: 100, L: 250, Version: Alpinweiß

T-Stück - Kupfer - Lötverbindung d1: 12, d2: 12, d3: 12 (Qualitätssiegel für d12-54)

Reduzierung der Kopplung - Kupfer - gelötete Verbindung d1: 12, d2: 10

Viega 2211XL

Viega 95002A

Sanpress Inox XL Adapter mit SC-Contur-Stahl, nicht korrodierender Pressverbindung, R-Gewindekomponenten EPDM-Dichtelement, Schneidring, Trennring, Polygon, VdS-Zertifizierung d: 76.1, R: 212

Viega 2226XL

Sanpress XL Adapter with SC-Contur- gunmetal- press connection, R-threadComponentsEPDM sealing element, cutting ringd: 88,9, R: 3

Press connector system with press connectors made of copper and gunmetal tested in acc. with DVGW worksheet W 534 with DVGW test seal and pipes made of copper in acc. with EN 1057 in acc. with DVGW worksheet GW 392.Suitable for drinking water installations in acc. with DIN 1988.For dimensionally stable concealed and pre-wall installations of manifold and riser pipes in Viega component assembly.Press connectorsAll sizes with SC-Contur – connections, which remain unpressed become visible when the system is filled. The SC-Contur is certified and fulfils the requirements of DVGW worksheet W 534, point 12.14, connectors with forced leakage.During leakage tests with water, Viega guarantees the identification of unpressed connections in the pressure range 0.1 MPa–0.65 MPa, in the case of a dry leakage test with compressed air or noble gases from 22 hPa–0.3 MPa.MarkingGreen dot on the press connectionSealing elementsEPDM, black (ethylene-propylene-dien-monomer rubber), up to 110 °C

Verlängerung - Gunmetal - R-Gewinde, Rp-Gewinde

Viega 2217.2

Viega 94270G

Viega 3090

Ellenbogen 90° - verchromtes Messing - Rp-Gewinde

Langer Nippel- Gunmetal- R-Gewinde: 12, L: 50

T-piece - copper - solder connection.

Viega 1112

Profipress Cap with SC-Contur- copper - press connection Components EPDM sealing elements.

Profipress Cap with SC-Contur- copper - press connection Components EPDM sealing elements

Viega 2216.1XL

Sanpress T-piece with SC-Contur- gunmetal or silicium bronze- press connectorsComponentsEPDM sealing elements d1: 35, d2: 28, d3: 35

Press connector system with press connectors and pipes made of stainless steel material Nos. 1.4401 and 1.4521 in acc. with DIN EN 10088, DIN EN 10312, DVGW worksheet GW 541, system certification for connectors and pipes in acc. with DVGW worksheet W 534, for drinking water installations in acc. with DIN 1988. For dimensionally stable concealed and pre-wall installations of manifold and riser pipes in Viega component assembly.Press connectorsAll sizes with SC-Contur – connections, which remain unpressed become visible when the system is filled. The SC-Contur is certified and fulfils the requirements of DVGW worksheet W 534, point 12.14, connectors with forced leakage.During leakage tests with water, Viega guarantees the identification of unpressed connections in the pressure range 0.1 MPa–0.65 MPa, in the case of a dry leakage test with compressed air or noble gases from 22 hPa–0.3 MPa.MarkingGreen dot on the press connectionSealing elementsEPDM, black (ethylene-propylene-die

Megapress Adapter with SC-Contur for drinking water installation- steel pipes in accordance with DIN EN 10220/10255 with galvanizing in accordance with DIN EN 10240- gunmetal or silicium bronze- press connectorsComponentsEPDM sealing elements, cutting ring, separator ringDN: 50, D: 2, d: 54

T-Stück- Gunmetal- Rp-GewindeRp1: 212, Rp2: 212, Rp3: 212