Raxofix Adapter mit SC-Contur-Siliziumbronze-Pressanschluss, R-Gewinde: 16, R: 34

Raxofix Verbindungsschraubfitting mit SC-Contur für Verteiler aus Siliziumbronze mit Pressanschluss, Viega Steckplatz: 16, G: 34

Raxofix Verbindungsschraubfitting mit SC-Contur- Siliziumbronze- Pressanschluss, G-Gewinde- Flachdichtungskomponenten EPDM-Dichtelement d: 16, G: 34

Raxofix-Steckstück mit SC-Contur für alle Viega-Metallsysteme, Siliziumbronze, Pressverbindung, Steckende d1: 20, d2: 18

Raxofix Adapter mit SC-Contur-Siliziumbronze-Pressanschluss, R-Gewinde: 20, R: 12

Raxofix Adapterbogen 90° mit SC-Contur-Siliziumbronze-Presseanschluss, R-Gewinde: 16, R: 12

Raxofix T-Stück mit SC-Contur-Siliciumbronze-Presseanschlüssen, Rp-Gewinde d1: 16, Rp: 12, d2: 16

Raxofix T-Stück mit SC-Contur- Siliciumbronze-Pressverbindern d1: 25, d2: 20, d3: 25

Raxofix Adapter mit SC-Contur-Silicium-Bronze-Pressanschluss, Rp-Gewinde: 16, Rp: 12

Raxofix T-Stück mit SC-Contur- Siliciumbronze-Pressverbindern d1: 20, d2: 20, d3: 20

Raxofix T-Stück mit SC-Contur- Siliciumbronze-Pressverbindern d1: 20, d2: 20, d3: 16

Flow-optimised press connector system for drinking water installations in acc. with DIN 1988 and DIN 50930-6 as well as heating installations, tested in acc. with DVGW worksheet W 534.Press connectorsSafe and fast processing without calibration of the pipe ends through O-ring-free press technology in all dimensions. In this way, widening or calibration of the pipe-ends becomes superfluous and reduces the assembly times. The interaction between aerodynamic radii and minimal cross-section narrowings ensure the lowest pressure losses in press systems for multilayer pipes. This allows a smaller dimensioning of drinking water installations and reduces the pipeline volume.SC-ConturAll sizes with SC-Contur – connections, which remain unpressed become visible when the system is filled. The SC-Contur is certified and fulfils the requirements of DVGW worksheet W 534, point 12.14, connectors with forced leakage.During leakage tests with water, Viega guarantees the identification of unpressed connections in the pressure range 0.1 MPa–0.65 MPa, in the case of a dry leakage test with compressed air or noble gases from 22 hPa–0.3 MPa.MarkingGreen dot on the press connectionPipesRaxofix PE-Xc/Al/PE-Xc•dimensionally stable, oxygen-proof in acc. with DIN 4726, greyRaxofix PE-Xc•flexible, blackDimensionsPress connectors and pipes•Raxofix-PE-Xc/Al/PE-Xc: d 16/20/25/32/40/50/63•Raxofix PE-Xc: d 16/20Areas of application PE-Xc/Al/PE-XcDrinking waterHeatingRainwaterCompressed airAreas of application PE-XcRainwaterDrinking waterUse of the system for application areas other than those described here must be agreed with Viega Service Center.Operating conditionsDrinking water installations•Operating temperature max. 70 °C•Operating pressure max. 1.0 MPaHeating installations•Operating temperature max. 80 °C•Operating pressure max. 1.0 MPaIrrelevant of the direction of flow, mixed installations are permitted.NoteThe DVGW test mark is only valid f

Viega Sanpress Bogen 90° 22 Rotguss/blank, 108120

Raxofix T-Stück mit SC-Contur-Siliciumbronze-Presseanschlüssen, Rp-Gewinde d1: 20, Rp: 12, d2: 20

Reduzierung der Kopplung - Kupfer - gelötete Verbindung d1: 28, d2: 22 (Qualitätssiegel für d12-54)

Verlängerung - Gunmetal - R-Gewinde, Rp-Gewinde

Langer Nippel in Waffengrau mit R-Gewinde. R: 1, L: 150 mm

T-Stück - Kupfer - Lötverbindung d1: 28, d2: 22, d3: 28 (Qualitätssiegel für d12-54)

Viega awkward connection pipe with eccentric sleeve, for tolerance compensation for toilet drain connection, with lip seal.

Press fitting system with copper and redware press fittings, approved according to DVGW worksheet W 534 with DVGW approval and copper pipes according to DIN EN 1057, according to DVGW worksheet W 392.
Suitable for drinking water installations according to DIN 1988.
For dimensionally stable surface-mounted and built-in installations of distribution and riser cables in Viega's complete system.

Steckerteil - Gunmetal - Steckende, Rp-Gewinde d: 22, Rp: 12

Viega 2315

Megapress Adapter with SC-Contur for drinking water installation- steel pipes in accordance with DIN EN 10220/10255 with galvanizing in accordance with DIN EN 10240- gunmetal or silicium bronze- press connectorsComponentsEPDM sealing element, cutting ring, separator ringDN: 25, D: 1, d: 28

T-Stück - Kupfer - Lötverbindung d1: 18, d2: 15, d3: 18 (Qualitätssiegel für D12-54)

Press connector system with press connectors and pipes made of stainless steel material Nos. 1.4401 and 1.4521 in acc. with DIN EN 10088, DIN EN 10312, DVGW worksheet GW 541, system certification for connectors and pipes in acc. with DVGW worksheet W 534, for drinking water installations in acc. with DIN 1988. For dimensionally stable concealed and pre-wall installations of manifold and riser pipes in Viega component assembly.Press connectorsAll sizes with SC-Contur – connections, which remain unpressed become visible when the system is filled. The SC-Contur is certified and fulfils the requirements of DVGW worksheet W 534, point 12.14, connectors with forced leakage.During leakage tests with water, Viega guarantees the identification of unpressed connections in the pressure range 0.1 MPa–0.65 MPa, in the case of a dry leakage test with compressed air or noble gases from 22 hPa–0.3 MPa.MarkingGreen dot on the press connectionSealing elementsEPDM, black (ethylene-propylene-die