Viega - Seite 25

Selbstsichernde Isolierschale für DN 15/20.

Easytop Isolierschale - geeignet für Easytop Kugelhahn Modelle 2275, 2275.1, 2275.2, 2275.3, 2275.4, 2275.5, 2275.6 und den selbstverriegelnden Kugelhahn Modell5375 - Dicke der Isolationsschicht gemäß EnEV

Viega 2212.1

Viega 2212

Sanpress Adapter with SC-Contur- gunmetal or silicium bronze- press connection, Rp-threadComponentsEPDM sealing element, polygon, VdS certification d: 35, Rp: 114

Sanpress Reducer with SC-Contur- gunmetal or silicium bronze- plug-in end, press connectionComponentsEPDM sealing elementd1: 35, d2: 28

Langer Nippel in Waffengrau mit R-Gewinde. R: 34, L: 180 mm

Viega 2218

Sanpress T-piece with SC-Contur- gunmetal or silicium bronze- press connectorsComponentsEPDM sealing elements d1: 35, d2: 28, d3: 35

Sanpress T-piece with SC-Contur- gunmetal or silicium bronze- press connectorsComponentsEPDM sealing elementsd1: 22, d2: 15, d3: 22

Viega 1117.2

Viega 95270

Viega 2616

Viega 95090

Ellenbogen 90° - Kupfer - gelötete Verbindung d1: 18, d2: 18

Viega 95090

Viega 2611

Nipple pipe- gunmetal- G-thread.

T-Stück- Gunmetal- Rp-GewindeRp1: 212, Rp2: 212, Rp3: 212

Viega 1115.1XL

Viega 2211

Flow-optimised press connector system for drinking water installations in acc. with DIN 1988 and DIN 50930-6 as well as heating installations, tested in acc. with DVGW worksheet W 534.Press connectorsSafe and fast processing without calibration of the pipe ends through O-ring-free press technology in all dimensions. In this way, widening or calibration of the pipe-ends becomes superfluous and reduces the assembly times. The interaction between aerodynamic radii and minimal cross-section narrowings ensure the lowest pressure losses in press systems for multilayer pipes. This allows a smaller dimensioning of drinking water installations and reduces the pipeline volume.SC-ConturAll sizes with SC-Contur – connections, which remain unpressed become visible when the system is filled. The SC-Contur is certified and fulfils the requirements of DVGW worksheet W 534, point 12.14, connectors with forced leakage.During leakage tests with water, Viega guarantees the identification of unpressed connections in the pressure range 0.1 MPa–0.65 MPa, in the case of a dry leakage test with compressed air or noble gases from 22 hPa–0.3 MPa.MarkingGreen dot on the press connectionPipesRaxofix PE-Xc/Al/PE-Xc•dimensionally stable, oxygen-proof in acc. with DIN 4726, greyRaxofix PE-Xc•flexible, blackDimensionsPress connectors and pipes•Raxofix-PE-Xc/Al/PE-Xc: d 16/20/25/32/40/50/63•Raxofix PE-Xc: d 16/20Areas of application PE-Xc/Al/PE-XcDrinking waterHeatingRainwaterCompressed airAreas of application PE-XcRainwaterDrinking waterUse of the system for application areas other than those described here must be agreed with Viega Service Center.Operating conditionsDrinking water installations•Operating temperature max. 70 °C•Operating pressure max. 1.0 MPaHeating installations•Operating temperature max. 80 °C•Operating pressure max. 1.0 MPaIrrelevant of the direction of flow, mixed installations are permitted.NoteThe DVGW test mark is only valid f

Adapter - Gunmetal - gelötete Verbindung, Rp-Gewinde d: 15, Rp: 34

Kappe zur Einstellung des Rohrgewindes G: 1, Version: weiß

Press connector system with press connectors and pipes made of stainless steel material Nos. 1.4401 and 1.4521 in acc. with DIN EN 10088, DIN EN 10312, DVGW worksheet GW 541, system certification for connectors and pipes in acc. with DVGW worksheet W 534, for drinking water installations in acc. with DIN 1988. For dimensionally stable concealed and pre-wall installations of manifold and riser pipes in Viega component assembly.Press connectorsAll sizes with SC-Contur – connections, which remain unpressed become visible when the system is filled. The SC-Contur is certified and fulfils the requirements of DVGW worksheet W 534, point 12.14, connectors with forced leakage.During leakage tests with water, Viega guarantees the identification of unpressed connections in the pressure range 0.1 MPa–0.65 MPa, in the case of a dry leakage test with compressed air or noble gases from 22 hPa–0.3 MPa.MarkingGreen dot on the press connectionSealing elementsEPDM, black (ethylene-propylene-die