Fußbodenheizung - Seite 9

Vormontierte lineare Verteiler mit mikrometrischer Bewegung, mit thermostatischer Option oder elektrischer Steuerung für Rücklaufleitungen. Mit Kompressionsenden. Ohne Armaturen. 2 Auslässe.

Heat shrink kit connection and end seal JLP for cold cable connection to ETL-10 self.reg. cable

Danfoss SSM underfloor heating manifold in stainless steel with output for 8 heating circuits. SSM floor heating manifolds are equipped with integrated vents and filling/draining function on both flow and return manifold. Manifold SSM is used for heat control in underfloor heating systems. Each hose in the underfloor heating system is connected to the manifold, which makes it possible to regulate the heat supply to all rooms in the building independently. The manifold consists of a flow manifold and a return manifold. The flow manifold allows you to close each circuit independently. The manifold is without a built-in flowmeter. The return manifold is equipped with Danfoss' preset valves, which ensures optimal water balance in the system. The manifold valves can be controlled electronically using thermo actuators. The manifold is available in modules from 2-12 heating circuits. In addition, there are fittings that allow the manifolds to be combined in series - up to a maximum of 16 heating circuits. Ball valves are offered as an option for shutdown between the manifold and the rest of the system.

Complete underfloor heating package with shunt, control unit, room thermostats and thermal actuators and 20 mm couplings.

Danfoss-Kompressionsarmaturen. Kupplungen, RA 15/6T, RA 15/6TB, RLV-K, RLV-KD, RLV-KS, RA-C 15, Sammelrohr CFD.

Salus under floor heating system paired and ready for use - 3 zones.

for one jig.

22 mm Floor chipboard with milled out grooves. Thereare tongues and grooves on all edges of the board.return boards for the Universal Chipboard System donot exist. The bent turns are milled out when the boardis placed. Size: 1800x600x22 mm

Used on Roth manifold

Danfoss Fußbodenheizung FHF-E. Endstücke, Halterungen und andere Zubehörteile für die FHF-Verteilerserie. Endkappe.

Used for Roth Manifold and Roth controller

Danfoss-Verbindungselemente. Kupplungen, RA 15/6T, RA 15/6TB, RLV-K, RLV-KD, RLV-KS, RA-C 15 und Sammelrohr CFD.

Heat distribution plate for Roth FH Universalplate

Complete insulation for Roth shunt

Adapter für Stellantriebe. Zur Montage von Stellantrieben auf Heimeier, Oventrop, Roth (>2005) Verteiler

Thermostat-Kopf für 7021.

Used on Roth manifold

Thermostatventil nur für Abzweig 7021. Eckventil mit 3/4".

Module für 1,3,4,6 Schleifen, kombinierbar bis max. 12 Schleifen, zur Verbindung mit dem Grundkit, Anschluss rechts oder links mit flacher Dichtung oder Anschluss von unten mit optionalem Ellbogenset. Lieferung mit Absperrventil zum Ausgleich (mit Einstellring) und Abschaltung sowie Einstellring zum Ausgleich ohne Werkzeug. Vorbereitete Stellen für Raumnamensschilder und Rücklauf mit Ventilen und Kappen vorbereitet für Aktoren Nr.1000138 (24V männlich) Nr. 1005605 (230V männlich), Schleifenanschluss Q&E 20,Q&E17 komplett mit Q&E-Ringen 1025659 ,1042836 Schleifenteilung:50mm Kopfteilung:225mm Maximaldruck:6 bar Maximale Temperatur:60°C Material:Fiberglas-verstärktes Polyamid

SALUS GVM-F underfloor heating manifold is a high flow manifold with manual balancing of each circuit.Each zone valve has on the flow pipe a flow meter that can be used for balancing. Alternatively, the built-in manual flow control integrated into the return valve on the return pipe can be used for balancing. Instructions on how to balance the circuit can be found in the distributor box.SALUS GVM-F underfloor heating distributor has a manual vent on each pipe and a drain valve with 1/2 ”thread for hose. Inlet and return pipe connection is 1 ”thread, and the actuator thread is 30 x 1.5 mmContains:Stainless steel manifold set with flow meterEuroconus set for 20 mm PEXVentilation valve on inlet and returnSwivel filling and drain valveMounting brackets for wall mountingWith individual room temperature control. SALUS GVM-F benefits are available with SALUS - wireless control.Properties:Available with SALUS insulation in form-stable EPPComplies with the installation requirements for insulation standard DS 452.Ready for wall mounting.Can be used with water / glycol mixtures with a mixing ratio of up to 30%.Euroconus are included for all inlets and outlets for 20 mm PEX / PE-RT pipe.• Can be integrated into the SALUS Smart Home solution.Can be operated directly from the room thermostat or from the mobile phone, tablet or computer.Benefits are made of stainless steel alloy AISI304 L Premium quality and extruded in dimension1 ”, for optimal distribution and minimum pressure drop.Maximum working pressure: 6 BarMaximum test pressure: 10 bar

Salus Quantum analog smart dial thermostat for UFH.Zigbee communication. Battery 2xAAAA.11 mm deep from wall. Can be paired with CO10RF (KL08RF) & UGE600 Gateway

Danfoss SSM underfloor heating manifold in stainless steel with output for 12 heating circuits and flow meters. SSM floor heating manifolds are equipped with integrated vents and filling/draining function on both flow and return manifold. Manifold SSM is used for heat control in underfloor heating systems. Each hose in the underfloor heating system is connected to the manifold, which makes it possible to regulate the heat supply to all rooms in the building independently. The manifold consists of a flow manifold and a return manifold. The flow manifold allows you to close each circuit independently. The manifold is with a built-in flowmeter. The return manifold is equipped with Danfoss' preset valves, which ensures optimal water balance in the system. The manifold valves can be controlled electronically using thermo actuators. The manifold is available in modules from 2-12 heating circuits. In addition, there are fittings that allow the manifolds to be combined in series - up to a maximum of 16 heating circuits. Ball valves are offered as an option for shutdown between the manifold and the rest of the system.

Danfoss floorheating FHF-BV. End-pieces, brackets and other accessories for the FHF manifold series. Ball valve prepared Danfoss thermometer.

Used with Roth Project room thermostat and controller.

Uponor Smatrix Wave Thermostat Dig T-166