Danfoss Icon Master Controller 24V with 15 channels. Underfloor heating control for the Danfoss Icon series with 15 outputs for thermal actuators. Up to 15 room thermostats, wireless/wired, can be registered. The Master Controller must be combined with the Danfoss Icon radio module if wireless room thermostats are to be registered. Automatic balancing, active pump relay, function test and potential-free boiler relay are standard. It is possible to purchase the Danfoss Icon app-module which provides access to app-control of the underfloor heating system via an iOS or Android device. The app-module also provides access to online updating of the Master Controller firmware (OTA). Cooling control and demand-controlled flow temperature can be purchased using the Danfoss Icon expansion module. The Master Controller is compatible with Zigbee 3.0 systems such as Danfoss Ally or 3rd party Zigbee systems. For Zigbee integration, the Danfoss Icon Zigbee module is used, which is connected to the Master Controller's app input.

Wireless room thermostat in white high gloss with display with integrated measurement of relative humidity.

Uponor Smatrix Wave controller Pulse X-265 6X wireless radiant heating/cooling controller a Uponor Smatrix Wave Pulse system supports up to 4 controller not compatible to Uponor Smatrix Wave controller X-163/X-165 6XFunctions: Autobalancing eletronic control supports up to 6 room thermostats supports up to 8 actuators (24V) heating/cooling function switched by contact sensing input or in public TH pump relay boiler relay valve and pump exercise overload protection combines underfloor heating/cooling and ceiling cooling control Uponor Smatrix com Pulse R-208 connectivity via RJ45 cableOptions: control and configuration via Uponor Smatrix Pulse app, remote control and smart home integration via Uponor SmatrixCom Pulse R-208 additional 6 channels and actuator outputs (24V) via Uponor Smatrix Wave slave module Pulse M-262 6X cabinet or wall-mounted installation (DIN rail or screw holes)Content: Uponor Smatrix Wave controller Pulse X-265 6X antenna first step instructions safety instructions mounting material conformity: CE / EAC operating voltage: 230V / 50Hz max. power input per actuator: 24VAC / 0.2A protection class: Class II IP20 color: white

Thermoelectric 24V 2W for Vario PLUS manifolds. With function indicator. Powerless closed.Mounted on the underfloor heating manifold flow valve.

Uponor Smatrix com. Pulse R-208 establishes connection between Uponor Smatrix Pulse system and smartphone/tablet and Uponor cloud remote/local access via Uponor Smatrix Pulse app (internet connection required)Functions: temporary wi-fi access point for direct access (if local wi-fi is not available) access via local wi-fi remote access via internet connection smart home ecosystem integration (Amazon Alexa, Google Home, IFTTT) over-the-air updates multi-home control smart alerts via Uponor Smatrix Pulse app third-party access for remote support (user allowance required) history trend analysis via Uponor Smatrix Pulse app timer programming comfort settings supply diagnostics secure encrypted connection to Uponor cloudContent: Uponor Smatrix com Pulse R-208 adaptor for DIN rail installations RJ45 connection cable (1.5m) first step instructions safety instructions mounting material conformity: CE / EAC power supply: RJ45 cable to Uponor Wave or Uponor Base controller Pulse ethernet interface: 10/100 Mbps (RJ45) ethernet protocols: Ethernet II protection class: Class II IP20 color: white

Thermoelectric 24V 2W for Vario B manifold. With function indicator. Powerless closed.Mounted on the underfloor heating manifold flow valve.

Danfoss TWA-V thermal actuator 230V NC. The thermal actuator TWA-V range is used with electrical on/off-controls to activate several types of Danfoss valves with RAV and VMT/8 connection. The actuator is equipped with a visual position indicator to show t

High-precision, wear-proof tool for pinning with staples in magazines, with curved magazine.

Quantum SQ610 is a new smart room thermostat from SALUS. The room thermostat look is light and simple in a smart thin design. The room thermostat must be connected to 230V. The SQ610 can be used freely for either wired systems or connected wirelessly to a SALUS floor heating system / SALUS Smart Home system.When connected through SALUS Smart Home it is possible to monitor and change the thermostat settings from either PC, Smart Phone or tablet. The SALUS Quantum SQ610 offers the opportunity to increase comfort and reduce energy consumption.

Modules for 1,3,4,6 loops, combineable to max. 12 loops, for connection with basic kit, connection right or left with flat sealing, or connection from below with optional elbowset, supply with lockshield valve for balancing ( with adjusting ring) and shutoff, adjusting ring for balancing without tools, prepared places for room name labels, return with valves and caps, prepared for actuators No.1000138 (24V male) No. 1005605 (230V male) loop connection Q&E 20, Q&E 17 complete with Q&E Rings 1025659,1042836 loop pitch 50 mm header pitch 225 mm max. pressure: 6 bar max. temperature: 60°C material: fibre glass reinforced polyamide

Uponor Smatrix sensor floor/remote S-1XX

Thermoelectric 230V 2W for Vario B manifold. With function indicator. Powerless closed.Mounted on the underfloor heating manifold flow valve.

Modules for 1,3,4,6 loops, combineable to max. 12 loops, for connection with basic kit, connection right or left with flat sealing, or connection from below with optional elbowset, supply with lockshield valve for balancing ( with adjusting ring) and shutoff, adjusting ring for balancing without tools, prepared places for room name labels, return with valves and caps, prepared for actuators No.1000138 (24V male) No. 1005605 (230V male) loop connection Q&E 20, Q&E 17 complete with Q&E Rings 1025659,1042836 loop pitch 50 mm header pitch 225 mm max. pressure: 6 bar max. temperature: 60°C material: fibre glass reinforced polyamide

For those who want to set the desired temperature, see the current temperature and control the floor surface temperatureFeatures wireless display thermostats• Infrared floor temperature sensor• Temperature range limitation• Wireless 2-way communication• Touchscreen control• Icon-based navigation• Noiseless switching• Battery (2 x 1,5V) powered

Uponor Smatrix Base PRO thermostat D+RH T-147 Bus measures and displays the perceived room temperature and relative humidity protection class: IP20 color: white glossy RAL9016Functions: heating or cooling demand indication RH limit indication comfort/ECO state change from system devices ECO setback modification manual H/C changeover function (not visible if linked to a controller X-14x) cooling allowed function (room by room, not visible if Uponor Smatrix Base PRO interface is linked to the system) displays celsius or fahrenheit operating modes: room temperature (RT), internal with floor max/min (RFT), remote sensor (RS), remote outdoor (RO) display with backlight (dims 10 seconds after last button event) displays software version (on power-up) optional: floor or outdoor sensor can be connectedConsisting of: Uponor Smatrix Base PRO thermostat D+RH T-147 Bus backplate mounting material security instructions

Uponor Smatrix Wave thermostat standard T-165 pod

Grooved polystyrene insulation panel for underfloor heating pipes at 300mm c/c. Panel dimensions 1200 x 790mm, available in two thicknesses 30 & 50. Used together with heat emission plate 1009132. Allow 0,95 m2/pcs (1,05 pcs/m2).

For those who want to extend the wireless signal range.

Uponor Smatrix Wave thermostat dig T-166

Uponor Smatrix Wave relay module M-161

Thermoelectric 230V for mounting on manifold with M30 x 1,5 mm adapter.The actuator has been specially developed, tested and approved for Uponor Smatrix room regulation with dynamic automatic control.With function indicator.Delivered locked half open to facilitate installation, powerless shutdown works after the first time the telestate gets voltage.CE MarkedColor: BlueProtection class: IP 54Voltage: 24V AC / DC

Danfoss IconTM Zigbee Module, 24V/wireless. Used to connect the Danfoss Icon master controller (088U1141 or 088U1142) to the Zigbee 3.0 network and can thereby be controlled via the Danfoss Ally gateway or a 3rd party Zigbee 3.0 compatible gateway.

Uponor Smatrix Base PRO controller X-147 Bus protection class: Class II IP20 color: grey RAL7015Consisting of: Uponor Smatrix Base PRO controller X-147 Bus 6X quick guide, security instructions micro SD card (pre-inserted) DIN rail (length: 37cm) mounting material