Fußbodenheizung - Seite 3

230 wireless 8 zone control box for Salus iT600 underfloor heating system.

Wireless Thermostat with knob

230V Wireless 4-zone expansion box for Salus iT600 Underfloor heating system.

The THB23031 is an auto balancing actuator that is used to provide automatic balancing of your underfloor heating circuits. It has two temperature sensors that are connected to the UFH flow and return pipes (inlet and outlet of the UFH manifold). It will continuosly measure the temperatures and adjust the actuator position to maintain the correct temparatur differential between the manifold flow and return pipes (Delta T). This product has an IP54 rating means that the produkt will be protected against contamination from limited amounts of dust and other particles. Additionally, it will be protected from water sprays from all directions. ITG Dresden have confirmed that the Salus THB actuator is equivalent to the hydraulic balancing. In co-operation with ITG Dresden, The Salus THB actuator has been tested and improved. During independent testing it was confirmed that the installation of the Salus THB system in existing underfloor heating system will achieve the same results as a conventional balancing.

Gerillte Polystyrol-Isolationsplatte für Fußbodenheizungsrohre im Abstand von 300 mm. Plattenabmessungen 1200 x 790 mm, erhältlich in zwei Dicken von 30 und 50. Wird zusammen mit der Wärmeemissionsplatte 1009132 verwendet. Erlauben Sie 0,95 m2/Stück (1,05 Stück/m2).

Pre-paired set for 1 circuit underfloor heating incl. Quantum thermostat.

Danfoss Icon Master Controller 24V with 15 channels. Underfloor heating control for the Danfoss Icon series with 15 outputs for thermal actuators. Up to 15 room thermostats, wireless/wired, can be registered. The Master Controller must be combined with the Danfoss Icon radio module if wireless room thermostats are to be registered. Automatic balancing, active pump relay, function test and potential-free boiler relay are standard. It is possible to purchase the Danfoss Icon app-module which provides access to app-control of the underfloor heating system via an iOS or Android device. The app-module also provides access to online updating of the Master Controller firmware (OTA). Cooling control and demand-controlled flow temperature can be purchased using the Danfoss Icon expansion module. The Master Controller is compatible with Zigbee 3.0 systems such as Danfoss Ally or 3rd party Zigbee systems. For Zigbee integration, the Danfoss Icon Zigbee module is used, which is connected to the Master Controller's app input.

Roth Clima Comfort FLOW is a fibre-reinforced, cement-based, selflevelling compound specifically designed for laying together with Roth Clima Comfort system panels or Roth Compact System.

Complete underfloor heating package with shunt, control unit, room thermostats and thermal actuators and 20 mm couplings.

Module für 1,3,4,6 Schleifen, kombinierbar bis max. 12 Schleifen, zur Verbindung mit dem Grundkit, Anschluss rechts oder links mit flacher Dichtung oder Anschluss von unten mit optionalem Ellbogenset. Lieferung mit Absperrventil zum Ausgleich (mit Einstellring) und Abschaltung sowie Einstellring zum Ausgleich ohne Werkzeug. Vorbereitete Stellen für Raumnamensschilder und Rücklauf mit Ventilen und Kappen. Vorbereitet für Aktoren Nr.1000138 (24V männlich) Nr. 1005605 (230V männlich), Schleifenanschluss Q&E 20,Q&E17 komplett mit Q&E-Ringen1025659 ,1042836 Schleifenteilung50 mm Kopfteilung225 mm Maximaldruck:6 bar Maximale Temperatur:60°C Material:Fiberglas-verstärktes Polyamid

Used in Roth Basicline floorheating system

Für diejenigen, die das System über eine Smartphone-App steuern möchten: App-Funktionen: Modul • Wi-Fi-Verbindung • Android-App • Apple-App • Temperaturen ändern • Zeitplan ändern

Complete underfloor heating package with shunt, control unit, room thermostats and thermal actuators and 20 mm couplings.

Module für 1,3,4,6 Schleifen, kombinierbar bis max. 12 Schleifen, zur Verbindung mit dem Grundkit, Anschluss rechts oder links mit flacher Dichtung oder Anschluss von unten mit optionalem Ellbogenset; Lieferung mit Absperrventil zum Ausgleich (mit Einstellring) und Abschaltung; Einstellring zum Ausgleich ohne Werkzeug; vorbereitete Stellen für Raumnamensschilder; Rücklauf mit Ventilen und Kappen; vorbereitet für Aktoren Nr.1000138 (24V männlich) Nr. 1005605 (230V männlich); Schleifenanschluss Q&E 20,Q&E17 komplett mit Q&E-Ringen1025659 ,1042836 ;Schleifenteilung50 mm Kopfteilung225 mm Maximaldruck:6 bar Maximaltemperatur:60°C Material:fiberglasverstärktes Polyamid

Digitaler verkabelter Raumthermostat für DIREKTE Steuerungssysteme. 24V

Complete underfloor heating package with shunt, control unit, room thermostats and thermal actuators and 20 mm couplings.

Danfoss SSM underfloor heating manifold in stainless steel with output for 6 heating circuits. SSM floor heating manifolds are equipped with integrated vents and filling/draining function on both flow and return manifold. Manifold SSM is used for heat control in underfloor heating systems. Each hose in the underfloor heating system is connected to the manifold, which makes it possible to regulate the heat supply to all rooms in the building independently. The manifold consists of a flow manifold and a return manifold. The flow manifold allows you to close each circuit independently. The manifold is without a built-in flowmeter. The return manifold is equipped with Danfoss' preset valves, which ensures optimal water balance in the system. The manifold valves can be controlled electronically using thermo actuators. The manifold is available in modules from 2-12 heating circuits. In addition, there are fittings that allow the manifolds to be combined in series - up to a maximum of 16 heating circuits. Ball valves are offered as an option for shutdown between the manifold and the rest of the system.

Salus under floor heating system paired and ready for use - 4 zones.

Heat distribution plate for Roth FH Universalplate

SALUS GVU is a complete floor heating shunt solution for underfloor heating with underfloor heating manifold, shunt and circulation pump built together in one unit.Our circulation pump is a 6m pump with capacity up to 16 zones. The underfloor heating manifold is a high flow manifold with manual balancing of each circuit. Each valve has a built-in manual flow control which is very easy to adjust. Instructions on how to balance the circuit can be found in the distributor box.The SALUS GVM floor heating manifold has a manual vent on each pipe and a drain valve with 1/2 ”thread for hose. The Inlet thermostat has a temperature setting of 20 to 55 degrees Celsius. Manifold pipe connection is 1 ", and connection to water for the heat supply is 3/4" socket, and threads to the actuator are 30 x 1.5 mm.

Danfoss IconTM Zigbee-Modul, 24V/drahtlos. Wird verwendet, um den Danfoss Icon-Master-Controller (088U1141 oder 088U1142) mit dem Zigbee 3.0-Netzwerk zu verbinden und kann somit über das Danfoss Ally Gateway oder ein Drittanbieter-Zigbee 3.0-kompatibles Gateway gesteuert werden.

Danfoss-Verbindungselemente. Kupplungen, RA 15/6T, RA 15/6TB, RLV-K, RLV-KD, RLV-KS, RA-C 15 und Sammelrohr CFD.

Isoliersatz Uponor für Fußbodenverteiler.

Complete shunt

Uponor Fluvia T PUSH 12 WL-G Pumpeneinheit.