Fußbodenheizung - Seite 10

Complete underfloor heating package with shunt, control unit, room thermostats and thermal actuators and 20 mm couplings.

Thermischer Stellantrieb für Fußbodenheizung von Salus mit Funktion „normally closed“ (NC) und 24 V AC-Betrieb.

Dieser Salus Thermo-Telestat ist für Fußbodenheizungssysteme vorgesehen, bei denen ein geschlossener NC-Stellantrieb erforderlich ist.

• Produkttyp: Thermo-Telestat
• Für Fußbodenheizung
• Normally closed (NC)
• 24 V AC

Eine unkomplizierte Wahl für Fußbodenheizungsinstallationen, die einen Salus 24 V AC NC Thermostellantrieb benötigen.

Used on Roth manifold

SALUS GVU is a complete floor heating shunt solution for underfloor heating with underfloor heating manifold, shunt and circulation pump built together in one unit.Our circulation pump is a 6m pump with capacity up to 16 zones. The underfloor heating manifold is a high flow manifold with manual balancing of each circuit. Each valve has a built-in manual flow control which is very easy to adjust. Instructions on how to balance the circuit can be found in the distributor box.The SALUS GVM floor heating manifold has a manual vent on each pipe and a drain valve with 1/2 ”thread for hose. The Inlet thermostat has a temperature setting of 20 to 55 degrees Celsius. Manifold pipe connection is 1 ", and connection to water for the heat supply is 3/4" socket, and threads to the actuator are 30 x 1.5 mm.

Für diejenigen, die hochentwickelte Steuerungsoptionen wünschen, einschließlich Kühlbetrieb und Versorgungstemperatursteuerung. Eigenschaften Erweiterungsmodul • Erforderliches Modul • Sendet und empfängt drahtlose Signale zwischen Raumthermostaten und Master-Controller

Komplettes Anpassungsset aus Messinglegierung für Polyethylenrohre. Gelb

SALUS GVU is a complete floor heating shunt solution for underfloor heating with underfloor heating manifold, shunt and circulation pump built together in one unit.Our circulation pump is a 6m pump with capacity up to 16 zones. The underfloor heating manifold is a high flow manifold with manual balancing of each circuit. Each valve has a built-in manual flow control which is very easy to adjust. Instructions on how to balance the circuit can be found in the distributor box.The SALUS GVM floor heating manifold has a manual vent on each pipe and a drain valve with 1/2 ”thread for hose. The Inlet thermostat has a temperature setting of 20 to 55 degrees Celsius. Manifold pipe connection is 1 ", and connection to water for the heat supply is 3/4" socket, and threads to the actuator are 30 x 1.5 mm.

Adapter für Stellantriebe. Zum Anbringen von Stellantrieben an Danfoss RAV/FJVR Ventilen.

Adapter für Stellantriebe. Zum Anbringen von Stellantrieben an Tesa-, Frese-, Honeywell-, Cazzaniga- und Wavin-Verteiler

Danfoss SSM underfloor heating manifold in stainless steel with output for 4 heating circuits. SSM floor heating manifolds are equipped with integrated vents and filling/draining function on both flow and return manifold. Manifold SSM is used for heat control in underfloor heating systems. Each hose in the underfloor heating system is connected to the manifold, which makes it possible to regulate the heat supply to all rooms in the building independently. The manifold consists of a flow manifold and a return manifold. The flow manifold allows you to close each circuit independently. The manifold is without a built-in flowmeter. The return manifold is equipped with Danfoss' preset valves, which ensures optimal water balance in the system. The manifold valves can be controlled electronically using thermo actuators. The manifold is available in modules from 2-12 heating circuits. In addition, there are fittings that allow the manifolds to be combined in series - up to a maximum of 16 heating circuits. Ball valves are offered as an option for shutdown between the manifold and the rest of the system.

Used between floorheating pipe and Roth manifold.

Used for Roth EURO-red manifold in gunmetal. Inliner in aisi316.

Danfoss SSM underfloor heating manifold in stainless steel with output for 9 heating circuits. SSM floor heating manifolds are equipped with integrated vents and filling/draining function on both flow and return manifold. Manifold SSM is used for heat control in underfloor heating systems. Each hose in the underfloor heating system is connected to the manifold, which makes it possible to regulate the heat supply to all rooms in the building independently. The manifold consists of a flow manifold and a return manifold. The flow manifold allows you to close each circuit independently. The manifold is without a built-in flowmeter. The return manifold is equipped with Danfoss' preset valves, which ensures optimal water balance in the system. The manifold valves can be controlled electronically using thermo actuators. The manifold is available in modules from 2-12 heating circuits. In addition, there are fittings that allow the manifolds to be combined in series - up to a maximum of 16 heating circuits. Ball valves are offered as an option for shutdown between the manifold and the rest of the system.

Vormontierte lineare Verteiler mit mikrometrischer Bewegung, mit thermostatischer Option oder elektrischer Steuerung für Rücklaufleitungen. Mit Kompressionsenden. Ohne Armaturen. 2 Auslässe.

Komplettes drahtloses Steuerungskit zur Steuerung der Heizung in kleinen Räumen bis max. 8 m2. Besteht aus einer 1-Zonen-Steuerungseinheit, einem analogen Raumthermostat und einem Aktuator, 230V.

Linear manifold 1x3/4/18 with incorporated lockshield valve

Vormontierte lineare Verteiler mit eingebautem Absperrventil. Mikrometrische Regulierung. Kompressionsenden. Ohne Armaturen. Gelb. 3 Ausgänge.

Danfoss TWA-V thermal actuator 230V NC. The thermal actuator TWA-V range is used with electrical on/off-controls to activate several types of Danfoss valves with RAV and VMT/8 connection. The actuator is equipped with a visual position indicator to show t

Vormontierte lineare Verteiler mit mikrometrischer Bewegung, mit thermostatischer Option oder elektrischer Steuerung für Rücklaufleitungen. Mit Kompressionsenden. Ohne Armaturen. 5 Auslässe.

Brass end coupling male x female x female. For linear manifolds series 7000PM, 7035M, 7035TEM and 7035DM. Yellow.

Die Danfoss BasicPlus und BasicPlus2 Raumthermostate sind als eigenständige Thermostate konzipiert, die direkt an einen 230V-Aktor angeschlossen werden können. Die Thermostate sind in Ausführungen mit Drehknopf, Display und programmierbarem Display erhältlich.

Complete insulation for Roth shuntunit

Extension for Roth ShuntUnit

Komplettes drahtloses Steuerungskit zur Steuerung der Heizung in kleinen Räumen bis max. 8 m2. Besteht aus einer 1-Zonen-Steuerungseinheit, einem analogen Raumthermostat, einem Aktuator und einem 1/2 Heizkörperventil, 230V.

SALUS GVM-F underfloor heating manifold is a high flow manifold with manual balancing of each circuit.Each zone valve has on the flow pipe a flow meter that can be used for balancing. Alternatively, the built-in manual flow control integrated into the return valve on the return pipe can be used for balancing. Instructions on how to balance the circuit can be found in the distributor box.SALUS GVM-F underfloor heating distributor has a manual vent on each pipe and a drain valve with 1/2 ”thread for hose. Inlet and return pipe connection is 1 ”thread, and the actuator thread is 30 x 1.5 mmContains:Stainless steel manifold set with flow meterEuroconus set for 20 mm PEXVentilation valve on inlet and returnSwivel filling and drain valveMounting brackets for wall mountingWith individual room temperature control. SALUS GVM-F benefits are available with SALUS - wireless control.Properties:Available with SALUS insulation in form-stable EPPComplies with the installation requirements for insulation standard DS 452.Ready for wall mounting.Can be used with water / glycol mixtures with a mixing ratio of up to 30%.Euroconus are included for all inlets and outlets for 20 mm PEX / PE-RT pipe.• Can be integrated into the SALUS Smart Home solution.Can be operated directly from the room thermostat or from the mobile phone, tablet or computer.Benefits are made of stainless steel alloy AISI304 L Premium quality and extruded in dimension1 ”, for optimal distribution and minimum pressure drop.Maximum working pressure: 6 BarMaximum test pressure: 10 bar