Fußbodenheizung - Seite 8

DEVIpipeheat 10 V3, 19m Self limiting with Danish plug

Sparepart for nova+.

Uponor Smatrix sensor floor/remote S-1XX

Uponor Smatrix Wave relay module M-161

Danfoss Durchflussthermostat Typ FH-TC für kompakte Fußbodenheizkreisverteiler mit selbstaktivierender thermostatischer Steuerung.

1" x 3/4" extension kit for Salus GVM manifold.

Complete shunt

Used on Roth manifold

Complete insulation for Roth shuntunit

Aluminum 0.5 mm. Groove for Uponor pePEX Q&E pipe 20 x 2 mm. Length 1150 mm, width 280 mm. 2 bend guides with 190 mm, 390 mm and 570 mm spacing respectively. Material consumption approx. 2.5 pcs/m2.

SALUS GVM underfloor heating manifold is a high flow distributor with manual balancing of each circuit.Each valve has a built-in manual flow control which is very easy to adjust. Instructions for balancing the circuit can be found in the distributor box.The SALUS GVM manifold has a manual vent on each pipe and a drain valve with 1/2 ”thread for hose. The inlet- and return- connection is 1 ”thread, and the thread for the actuators are 30 x 1.5 mmContains:Stainless steel distributor set with valveEurokonus for 20 mm PEXVentilation valve on inlet and returnSwivel filling and drain valveMounting bracket for wall mountingWith individual room temperature control.Salus GVM underfloor heating distributors can be supplied with SALUS wireless control.Properties of Salus Underfloor Heating Manifold:Available with Salus insulation in form-stable EPP.Meets the installation requirements for insulation standard DS 452.Can be used with water / glycol mixtures with a mixing ratio of up to 30%.Euroconus are included for all inlets and outlets for 20 mm PEX / PE-RT pipe.Ready for wall mounting.Can be integrated into the Salus Smart Home solution.Can be operated directly from the room thermostat and from the mobile phone, tablet or computer.The distribution pipes are made of stainless steel alloy AISI304 L Premium quality and extruded in dimension 1 ”for optimal distribution and minimum pressure drop.Maximum working pressure: 6 BarMaximum proofing pressure: 10 bar

SALUS GVM underfloor heating manifold is a high flow distributor with manual balancing of each circuit.Each valve has a built-in manual flow control which is very easy to adjust. Instructions for balancing the circuit can be found in the distributor box.The SALUS GVM manifold has a manual vent on each pipe and a drain valve with 1/2 ”thread for hose. The inlet- and return- connection is 1 ”thread, and the thread for the actuators are 30 x 1.5 mmContains:Stainless steel distributor set with valveEurokonus for 20 mm PEXVentilation valve on inlet and returnSwivel filling and drain valveMounting bracket for wall mountingWith individual room temperature control.Salus GVM underfloor heating distributors can be supplied with SALUS wireless control.Properties of Salus Underfloor Heating Manifold:Available with Salus insulation in form-stable EPP.Meets the installation requirements for insulation standard DS 452.Can be used with water / glycol mixtures with a mixing ratio of up to 30%.Euroconus are included for all inlets and outlets for 20 mm PEX / PE-RT pipe.Ready for wall mounting.Can be integrated into the Salus Smart Home solution.Can be operated directly from the room thermostat and from the mobile phone, tablet or computer.The distribution pipes are made of stainless steel alloy AISI304 L Premium quality and extruded in dimension 1 ”for optimal distribution and minimum pressure drop.Maximum working pressure: 6 BarMaximum proofing pressure: 10 bar

Brass end coupling male x female x female. For linear manifolds series 7000PM, 7035M, 7035TEM and 7035DM. Yellow.

Erweiterung für 1" Verteiler, 2 Kreisläufe. 1" Verteiler, Zulauf- und Rücklaufleiste inklusive Kupplung. Inklusive 20/16 Anschlüssen.

Linear manifold 1x3/4/18 with incorporated lockshield valve

Vormontierte lineare Verteiler mit eingebautem Absperrventil. Mikrometrische Regulierung. Kompressionsenden. Ohne Armaturen. Gelb. 3 Ausgänge.

Danfoss TWA-V thermal actuator 230V NC. The thermal actuator TWA-V range is used with electrical on/off-controls to activate several types of Danfoss valves with RAV and VMT/8 connection. The actuator is equipped with a visual position indicator to show t

Pettinaroli Raumthermostat mit Direktverdrahtung ohne Display. 24V

Energie sparender Thermo-Elektrischer Stellantrieb 1W, 230V, mit Adapter.

Adapter für Stellantriebe. Zum Anbringen von Stellantrieben an Danfoss RAV/FJVR Ventilen.

Adapter für Stellantriebe. Zum Anbringen von Stellantrieben an Tesa-, Frese-, Honeywell-, Cazzaniga- und Wavin-Verteiler

Adapter für Stellantriebe. Zum Anbringen von Stellantrieben an Wirsbo (TA) Verteiler

Salus cirkulation pump, A+Rated, 6m, 130 mm

Multibox für 1-Kreis-Heizsysteme

Sparepart for Roth shunt