Alu pex Systeme - Seite 8

Uponor 1014111 Sanitärverteilerrohr

Geberit Mepla Bogenadapter 90° mit männlichem Gewinde: d=16mm, R=1/2

Geberit Mepla T-Stück, reduziert: d=20mm, d1=16mm, d2=20mm

Geberit Mepla Ellbogen: 90°, d=16mm

Geberit Mepla T-Stück, reduziert: d=26mm, d1=26mm, d2=20mm

Geberit Mepla Adapter mit männlichem Gewinde: d=32mm, R=1 1/4

Geberit Mepla Adapter mit Innengewinde: d=16mm, Rp=1/2

Geberit Mepla T-piece, reduced: d=20mm, d1=16mm, d2=16mm

Geberit Mepla Adapter mit Innengewinde: d=20mm, Rp=3/4

Geberit Mepla adapter with union nut: d=20mm, G=3/4

Geberit Mepla Ellbogen-Wasserhahnanschluss 90°: d=20mm, Rp=1/2, L=3,6cm

Geberit Mepla T-Stück, reduziert: d=32mm, d1=20mm, d2=26mm

Henco 16 x 16 mm PVDF Pressgeradekupplung für Wasser-, Heizungs- und Kühlanlagen. Max. 16 bar.

Henco 40 x 40 x 40 mm PVDF Press-T-Stück für Wasser-, Heizungs- und Kühlanlagen. Max. 16 bar.

Henco 50 x 50 x 50 mm PVDF Press-T-Stück für Wasser-, Heizungs- und Kühlanlagen. Max. 16 bar.

Henco 63 x 63 x 63 mm PVDF Press-T-Stück für Wasser-, Heizungs- und Kühlanlagen. Max. 16 bar.

Bending spring HENCO, internal 20X2 mm, L = 500 mm

Henco 63 x 40 x 63 mm PVDF Press-T-Stück für Wasser-, Heizungs- und Kühlanlagen. Max. 16 bar.

Henco 63 x 63 mm PVDF Pressbogen 45° für Wasser-, Heizungs- und Kühlanlagen. Max. 16 bar.

Henco 50 x 50 mm PVDF Pressbogen 45° für Wasser-, Heizungs- und Kühlanlagen. Max. 16 bar.

Henco 40 x 26 mm PVDF Pressreduzierkupplung für Wasser-, Heizungs- und Kühlanlagen. Max. 16 bar.

Raxofix-Kupplung mit SC-Contur-Siliziumbronze-Presseanschluss d1: 25, d2: 20

Flow-optimised press connector system for drinking water installations in acc. with DIN 1988 and DIN 50930-6 as well as heating installations, tested in acc. with DVGW worksheet W 534.Press connectorsSafe and fast processing without calibration of the pipe ends through O-ring-free press technology in all dimensions. In this way, widening or calibration of the pipe-ends becomes superfluous and reduces the assembly times. The interaction between aerodynamic radii and minimal cross-section narrowings ensure the lowest pressure losses in press systems for multilayer pipes. This allows a smaller dimensioning of drinking water installations and reduces the pipeline volume.SC-ConturAll sizes with SC-Contur – connections, which remain unpressed become visible when the system is filled. The SC-Contur is certified and fulfils the requirements of DVGW worksheet W 534, point 12.14, connectors with forced leakage.During leakage tests with water, Viega guarantees the identification of unpressed connections in the pressure range 0.1 MPa–0.65 MPa, in the case of a dry leakage test with compressed air or noble gases from 22 hPa–0.3 MPa.MarkingGreen dot on the press connectionPipesRaxofix PE-Xc/Al/PE-Xc•dimensionally stable, oxygen-proof in acc. with DIN 4726, greyRaxofix PE-Xc•flexible, blackDimensionsPress connectors and pipes•Raxofix-PE-Xc/Al/PE-Xc: d 16/20/25/32/40/50/63•Raxofix PE-Xc: d 16/20Areas of application PE-Xc/Al/PE-XcDrinking waterHeatingRainwaterCompressed airAreas of application PE-XcRainwaterDrinking waterUse of the system for application areas other than those described here must be agreed with Viega Service Center.Operating conditionsDrinking water installations•Operating temperature max. 70 °C•Operating pressure max. 1.0 MPaHeating installations•Operating temperature max. 80 °C•Operating pressure max. 1.0 MPaIrrelevant of the direction of flow, mixed installations are permitted.NoteThe DVGW test mark is only valid f

Raxofix-Kupplung mit SC-Contur-Siliziumbronze - Pressverbindung d1: 32, d2: 32

Raxofix Adapter Ellbogen 90° mit SC-Contur-Siliziumbronze-Presseanschluss, Rp-Gewinde: 16, Rp: 12