Alu pex Systeme - Seite 7

Geberit Mepla bend adapter 90° with male thread: d=20mm, R=1/2

Used with Roth alu-laserplus pipe and Roth tools

Geberit Mepla T-Stück, gleich: d=40mm

Raxofix Adapter elbow 90° with SC-Contur- silicium bronze- press connection, R-threadd: 20, R: 34

Uponor 1070502 Sanitärarmatur Armaturenanschluss

Flow-optimised press connector system for drinking water installations in acc. with DIN 1988 and DIN 50930-6 as well as heating installations, tested in acc. with DVGW worksheet W 534.Press connectorsSafe and fast processing without calibration of the pipe ends through O-ring-free press technology in all dimensions. In this way, widening or calibration of the pipe-ends becomes superfluous and reduces the assembly times. The interaction between aerodynamic radii and minimal cross-section narrowings ensure the lowest pressure losses in press systems for multilayer pipes. This allows a smaller dimensioning of drinking water installations and reduces the pipeline volume.SC-ConturAll sizes with SC-Contur – connections, which remain unpressed become visible when the system is filled. The SC-Contur is certified and fulfils the requirements of DVGW worksheet W 534, point 12.14, connectors with forced leakage.During leakage tests with water, Viega guarantees the identification of unpressed connections in the pressure range 0.1 MPa–0.65 MPa, in the case of a dry leakage test with compressed air or noble gases from 22 hPa–0.3 MPa.MarkingGreen dot on the press connectionPipesRaxofix PE-Xc/Al/PE-Xc•dimensionally stable, oxygen-proof in acc. with DIN 4726, greyRaxofix PE-Xc•flexible, blackDimensionsPress connectors and pipes•Raxofix-PE-Xc/Al/PE-Xc: d 16/20/25/32/40/50/63•Raxofix PE-Xc: d 16/20Areas of application PE-Xc/Al/PE-XcDrinking waterHeatingRainwaterCompressed airAreas of application PE-XcRainwaterDrinking waterUse of the system for application areas other than those described here must be agreed with Viega Service Center.Operating conditionsDrinking water installations•Operating temperature max. 70 °C•Operating pressure max. 1.0 MPaHeating installations•Operating temperature max. 80 °C•Operating pressure max. 1.0 MPaIrrelevant of the direction of flow, mixed installations are permitted.NoteThe DVGW test mark is only valid f

Used with Roth alu-laserplus pipe and Roth tools

Geberit Mepla Adapter-Verbindung mit männlichem Gewinde: d=20mm, R=1/2, G=3/4

HENCO 40x40x40 mm VISION Push-T-Stück für Wasser-, Heizungs- und Kühlanlagen, max. 16 bar

HENCO 26x3/4 VISION Push gerade Steckverbinder für Wasser-, Heizungs- und Kühlanlagen, max. 16 bar

Henco 20 mm x 34 PVDF Pressgerade Übergangsstück für Wasser-, Heiz- und Kühlanlagen. Max. 16 bar.

Henco 32 x 26 mm PVDF Pressreduzierkupplung für Wasser-, Heiz- und Kühlanlagen. Max. 16 bar.

Henco 20 x 26 x 20 mm PVDF press tee for water-, heating- and cooling installations. Max. 16 bar.

Henco 32 x 20 x 26 mm PVDF press tee for water-, heating- and cooling installations. Max. 16 bar.

Henco 26 x 20 x 20 mm PVDF press tee for water-, heating- and cooling installations. Max. 16 bar.

Henco 32 x 32 x 32 mm PVDF press tee for water-, heating- and cooling installations. Max. 16 bar.

Biegefeder HENCO, außen 20X2 mm, L = 500 mm

Biegefeder HENCO, außen 16X2 mm, L = 500 mm

Henco 50 x 32 mm PVDF Pressreduzierung für Wasser-, Heiz- und Kühlanlagen. Max. 16 bar.

HENCO 20x20 mm VISION Push-Ellbogen 90 Grad für Wasser-, Heiz- und Kühlanlagen, max. 16 bar

Geberit Mepla T-piece, reduced: d=63mm, d1=40mm, d2=63mm

Uponor 1070535 Sanitärarmatur Elbow

Uponor 1070550 Sanitärarmatur Kompressionskuppler