Viega - Seite 3

Viega 3120

Profipress T-Stück mit SC-Contur-Kupferpressverbindern, Komponenten EPDM-Dichtelemente d1: 15, d2: 15, d3: 15

Adapter - Gunmetal - gelötete Verbindung, R-Gewinde: 18, R: 12

Viega Sanpress Bogen 90° 22 Rotguss/blank, 108120

Viega 1112

Sanpress Inox Verbindungsschraubfitting mit SC-Contur- Stahl nicht korrodierend - Pressverbindung, G-Gewinde - Flachdichtungskomponenten EPDM-Dichtelement, EPDM-Flachdichtung, Unionsmutter Schraubfitting d: 15, G: 12

Langer Nippel in Waffengrau mit R-Gewinde. R: 34, L: 120 mm

Kupplung - Rotguss - Rp-GewindeRp: 38

Viega 2428

Raxofix Adapter Ellbogen 90° mit SC-Contur-Siliciumbronze-Presseanschluss, Rp-Gewinde: 20, Rp: 34

Long nipple- gunmetal- R-thread

Fittings with threads in acc. with DINEN 10226, Part 1, certified for drinking water in acc. with DIN 1988 and gas installations in acc. with TRGI 2008 (observe notes on the model), tested in acc. with DVGW worksheet GW 6 and GW 393.CertificatesGunmetal threaded fittings – DVGW-Reg.-No. DV-7401AO2957Threaded connectionsR-external thread, produced on site – hempen without roughening of the thread is possible.

Viega 2426.1

Viega 2214

Press connector system with press connectors made of copper and gunmetal tested in acc. with DVGW worksheet W 534 with DVGW test seal and pipes made of copper in acc. with EN 1057 in acc. with DVGW worksheet GW 392.Suitable for drinking water installations in acc. with DIN 1988.For dimensionally stable concealed and pre-wall installations of manifold and riser pipes in Viega component assembly.Press connectorsAll sizes with SC-Contur – connections, which remain unpressed become visible when the system is filled. The SC-Contur is certified and fulfils the requirements of DVGW worksheet W 534, point 12.14, connectors with forced leakage.During leakage tests with water, Viega guarantees the identification of unpressed connections in the pressure range 0.1 MPa–0.65 MPa, in the case of a dry leakage test with compressed air or noble gases from 22 hPa–0.3 MPa.MarkingGreen dot on the press connectionSealing elementsEPDM, black (ethylene-propylene-dien-monomer rubber), up to 110 °C

Viega 2611

Prestabo T-Stück mit SC-Contur- verzinktem unlegiertem Stahl- PressverbindernKomponentenEPDM-Dichtelemented1: 22, d2: 18, d3: 22

Viega 1118

Viega 1126

Plug- gunmetal- R-threadComponentsQuadraticR: 1

Press connector system with press connectors made of copper and gunmetal tested in acc. with DVGW worksheet W 534 with DVGW test seal and pipes made of copper in acc. with EN 1057 in acc. with DVGW worksheet GW 392.Suitable for drinking water installations in acc. with DIN 1988.For dimensionally stable concealed and pre-wall installations of manifold and riser pipes in Viega component assembly.Press connectorsAll sizes with SC-Contur – connections, which remain unpressed become visible when the system is filled. The SC-Contur is certified and fulfils the requirements of DVGW worksheet W 534, point 12.14, connectors with forced leakage.During leakage tests with water, Viega guarantees the identification of unpressed connections in the pressure range 0.1 MPa–0.65 MPa, in the case of a dry leakage test with compressed air or noble gases from 22 hPa–0.3 MPa.MarkingGreen dot on the press connectionSealing elementsEPDM, black (ethylene-propylene-dien-monomer rubber), up to 110 °C

Rohrschelle Kunststoff einzeln für d: 24

Viega 2312.1

Rosette - für WC-Anschlussbogen, WC-Anschlussrohr - Kunststoff DN: 100, Ø: 165, H: 50, Ausführung: alpinweiß

Viega 4211