Easytop Ball valve- Inlet/outlet: Rp-threadComponentsValve casing gunmetal or silicium bronze according to DIN 50930-6 / DIN EN 1982, maintenance-free selector shaft, stainless steel ball, actuation lever T-form with medium marking green/red exchangeable. Technical dataoperating pressure max. 1.6 MPa (PN 16)operating temperature max. 110 °Cwith DVGW-test markDN: 25, Rp: 1

Megapress Adapter with SC-Contur for drinking water installation- steel pipes in accordance with DIN EN 10220/10255 with galvanizing in accordance with DIN EN 10240- gunmetal or silicium bronze- press connectorsComponentsEPDM sealing element, cutting ring, separator ringDN: 25, D: 1, d: 28

Raxofix T-Stück mit SC-Contur- Siliziumbronze-Pressverbindern d1: 25, d2: 16, d3: 20

Easytop Ball valve with SC-Contur- for water- and heat meter- not suitable for Easytop Insulating shell 2275.90- press connection, G-threadComponentsValve casing gunmetal or silicium bronze according to DIN 50930-6 / DIN EN 1982, maintenance-free selector shaft, black powder-coated actuating lever made of metal, EPDM sealing element, EPDM flat seal.Technical dataoperating pressure max. 1.6 MPa (PN 16)operating temperature max. 110 °Cwith DVGW-test markDN: 15, d: 18, G: 34

Pressverbindungssystem mit Pressverbindern aus Kupfer und Rotguss, geprüft gemäß DVGW-Arbeitsblatt W 534 mit DVGW-Prüfsiegel und Rohren aus Kupfer gemäß EN 1057 in Übereinstimmung mit dem DVGW-Arbeitsblatt GW 392. Geeignet für Trinkwasserinstallationen gemäß DIN 1988. Für dimensionsstabile verdeckte und Vorwandinstallationen von Sammel- und Steigleitungen im Viega-Komponentensystem. Pressverbinder Alle Größen mit SC-Contur - Verbindungen, die ungedrückt bleiben, werden sichtbar, wenn das System gefüllt ist. Der SC-Contur ist zertifiziert und erfüllt die Anforderungen des DVGW-Arbeitsblatts W 534, Punkt 12.14, Verbindungen mit Zwangsleckage. Bei Dichtheitsprüfungen mit Wasser garantiert Viega die Identifizierung ungedrückter Verbindungen im Druckbereich von 0,1 MPa bis 0,65 MPa; bei einer trockenen Dichtheitsprüfung mit Druckluft oder Edelgasen von 22 hPa bis zu einem Druck von maximal 0,3 MPa.MarkingGreen dot on the press connectionSealing elementsEPDM (Ethylen-Propylen-Dien-Monomer-Kautschuk), schwarz bis zu einer Temperatur von 110 °C

Viega 1116XL

Viega 1118

Viega 2416

Press connector system with press connectors made of copper and gunmetal tested in acc. with DVGW worksheet W 534 with DVGW test seal and pipes made of copper in acc. with EN 1057 in acc. with DVGW worksheet GW 392.Suitable for drinking water installations in acc. with DIN 1988.For dimensionally stable concealed and pre-wall installations of manifold and riser pipes in Viega component assembly.Press connectorsAll sizes with SC-Contur – connections, which remain unpressed become visible when the system is filled. The SC-Contur is certified and fulfils the requirements of DVGW worksheet W 534, point 12.14, connectors with forced leakage.During leakage tests with water, Viega guarantees the identification of unpressed connections in the pressure range 0.1 MPa–0.65 MPa, in the case of a dry leakage test with compressed air or noble gases from 22 hPa–0.3 MPa.MarkingGreen dot on the press connectionSealing elementsEPDM, black (ethylene-propylene-dien-monomer rubber), up to 110 °C

Sanpress Inox Connection screw fitting with SC-Contur- steel non-corroding- press connection, G-thread- flat sealingComponentsEPDM sealing element, EPDM flat seal, union nut screw fitting, VdS certificationd: 22, G: 34

Langer Nippel in Waffengrau mit R-Gewinde. R: 12, L: 120 mm

Viega 2415

Long nipple- gunmetal- R-thread

Viega 2211

Press connector system with press connectors and pipes made of stainless steel material Nos. 1.4401 and 1.4521 in acc. with DIN EN 10088, DIN EN 10312, DVGW worksheet GW 541, system certification for connectors and pipes in acc. with DVGW worksheet W 534, for drinking water installations in acc. with DIN 1988. For dimensionally stable concealed and pre-wall installations of manifold and riser pipes in Viega component assembly.Press connectorsAll sizes with SC-Contur – connections, which remain unpressed become visible when the system is filled. The SC-Contur is certified and fulfils the requirements of DVGW worksheet W 534, point 12.14, connectors with forced leakage.During leakage tests with water, Viega guarantees the identification of unpressed connections in the pressure range 0.1 MPa–0.65 MPa, in the case of a dry leakage test with compressed air or noble gases from 22 hPa–0.3 MPa.MarkingGreen dot on the press connectionSealing elementsEPDM, black (ethylene-propylene-die

Viega 95301

Viega 2263

Smartloop Anschluss-Set für Warmwassersteigleitung mit interner Zirkulationsleitung, Warmwassersteigleitung ab d28, Zirkulationsrohr d15 - geeignet für Smartloop Rohr PB 2007.3 - Rotguss oder Siliziumbronze-Komponenten: Stecker, Verbindungsbuchsed1: 35, d2: 12

Viega 3130

Geruchverschluss für Abflussrohr - für Spüle - Kunststoffkomponenten Ablaufbogen 45°, Abwasserschlauchanschluss Qualitätskontrolle gemäß DIN EN 274 G: 112, DN: 50

Viega 2216.1XL

Viega 2312

Easytop Ball valve- Inlet/outlet: Rp-threadComponentsValve casing gunmetal or silicium bronze according to DIN 50930-6 / DIN EN 1982, maintenance-free selector shaft, stainless steel ball, actuation lever T-form with medium marking green/red exchangeable. Technical dataoperating pressure max. 1.6 MPa (PN 16)operating temperature max. 110 °Cwith DVGW-test markDN: 50, Rp: 2

Easytop Ball valve with SC-Contur- for water- and heat meter- not suitable for Easytop Insulating shell 2275.90- press connection, G-threadComponentsValve casing gunmetal or silicium bronze according to DIN 50930-6 / DIN EN 1982, maintenance-free selector shaft, black powder-coated actuating lever made of metal, EPDM sealing element, EPDM flat seal.Technical dataoperating pressure max. 1.6 MPa (PN 16)operating temperature max. 110 °Cwith DVGW-test mark DN: 20, d: 22, G: 34

Easytop Slanted seat valve (free-flow valve), with SC-Contur- press connectorsComponentsValve casing and top made of gunmetal or silicium bronze in accordance with DIN 50930-6 / DIN EN 1982, valve seat and valve plate unit stainless steel, spindle transmission, position indication open/closed, ergonomic handwheel and closed with medium marking green/red exchangeable, drain plug G14, EPDM sealing elements.Technical dataoperating pressure max. 1.6 MPa (PN 16)operating temperature max. 90 °Cwith DVGW-test markDN: 32, d: 35