Treiber, Spulen & Transformatoren - Seite 4

Dimming the next step in energy savingThis intelligent high-frequency electronic dimming ballast utilizes the DALI or Touch and Dim push-button protocol for fluorescent lamps. It meets A1BAT requirements, thereby pre-empting upcoming legislation. With a special command you can retrieve the system’s mains power consumption, and with another you can find out which lamp wattage is connected. Combined with controls, additional energy savings can be achieved. Product Benefits • Extremely low stand-by losses, controlled cut-off for dim levels above 80%, hybrid control dimming (current control at 100% and power control at 1%) – combined with MASTER TL5 Eco the most energy-efficient solution • HF operation improves light quality and lamp lifetime. • Compliant with European and Asian norms and suitable for emergency lighting systemsProduct Features • HF-R Intelligent recognizes what type of lamp (T5 HE, HO, ECO, TL-D, PL-L) is connected and drives it accordingly • Programmed start: flicker-free ignition < 1.0 second and striation-free operation, no stroboscopic effects. Preheating the lamp electrodes enables the lamps to be switched on and off without reducing life • Smart power ensures constant light, independent of mains fluctuations and dimming from 1 to 100% • Stop circuit is activated within 5 seconds in the event of lamp failure (safety stop), and ballast resets automatically after lamp replacement • Programmable for intelligent functionalities via Philips MultiOne: Corridor mode, Emergency DC dim level, Burn-in timeEnvironment • The HF-R intelligent will recognize which lamp is connected and will drive it accordingly • Extremely low energy consumption in stand-by (0.25 W) • Optimized for MASTER TL5 Eco lamps • RoHS and ISO 14000-compliant • EEI = A1 BAT (Best available technology)Application • Indoor, general and task lighting applications in combination with lighting control systems (personal con

Robust design, compact formHF-Matchbox Red is an affordable, reliable, compact, lightweight and high-frequency ballast for use with system wattages below 25 W in combination with TL mini, TL-D, TL5 and TL5c, PL-T/C, and PL-L/S lamps. The HF-M Red range has a robust design, meets all relevant international safety and performance standards and has an energy efficiency index (CELMA EEI) of A2. Product Benefits • Can be operated with movement-detection control systems. • Automatic restart (after voltage dip or lamp exchange) ensures easy operation and hassle-free re-lamping. • Suitable for use in class I or class II luminairesProduct Features • Over 60,000 on/off switches on one lamp (depending on lamp/ballast combination) • Suitable for emergency DC operation between 190 and 254 V • Programmed, flicker-free, pre-heated start (<0.8 s) which allows the lamp to be switched on and off without reducing useful lamp lifeApplication • Used with movement-detection control systems like Philips OccuPlus • Mainly for indoor applications such as spotlights, downlights, light boxes, and emergency and security fixtures used largely in retail stores, office buildings, hotels, private homes and residential buildings • Domestic applications such as outdoor garden lighting, garage areas, stairways

Mean Well LED-Netzteil, 200W, 24Vdc und Ip67. Der LED-Treiber ist für den Innen- und Außenbereich sowie Feuchträume geeignet. Die IP-Schutzklasse beträgt 67.

• LED driver for cabinet lighting and mini downlights (350mA), 6 outputs
• Dimmable – leading or trailing edge
• Built-in thermofuse with auto reset
• Quick and easy installation
• Can be fastened by screws
• Do NOT plug in any LED lamps, when connected to power

Dimmbares Snappy LED-Netzteil, 75W, 24Vdc und IP20. LED-Netzteil, das mit einem Standard-Frontkanten- oder Rückkanten-Dimmer gedimmt werden kann.

Mean Well LED power supply, 150W, 12Vdc, IP67.The power supply is adjusted up to 13Vdc as a special item.LED driver is suitable for both indoor and outdoor use and wet rooms due. IP protection class is 67.

Knackiges LED-Netzteil - 350 mA, 6W, Ip20. Super schlanker LED-Treiber.

LED-Transformator 24 V (Gleichstrom)/20 W
24 V Gleichstrom für LEDs bis zu einer Gesamtlast von 20 W

Philips 913700698466 Nicht kategorisiert

- 75 W LED-Treiber mit konstanter Spannung- Ausgangsspannung von 12 V- Lebensdauer (h): 30.000- Spannungsbereich (V): 198–264- Maximaltemperatur am Tc-Punkt (°C): 85- Umgebungstemperaturbereich: –15 °C .. +45 °C - IP-Schutzart: IP20 - Lebensdauer (h): 30.000 (weitere Details im Datenblatt)

An energy-efficient solutionHF-Performer III TL-D is a slim and high-frequency electronic ballast for TL-D fluorescent lamps. It is ideal for applications where high energy efficiency is required. The HF-Performer III range has a robust design, meets all relevant international safety and performance standards and is energy-efficient (CELMA EEI A2 BAT). Product Features • Robust design for 100,000 hours lifetime at Ta = 50 C and over 100,000 on/off switching operations on one lamp • Programmed, flicker-free, pre-heated start (< 0.5 s) which allows the lamp to be switched on and off without reducing useful lamp life • Active power factor correction to ensure constant light, irrespective of mains-voltage fluctuations • The unit is protected against excessive mains voltage and incorrect connections. Product Benefits • The programmed start enables the lamp to be switched on and off without reducing useful lamp life. • DC emergency operation in line with IEC/EN 60598-22 luminaire norms • Smart power ensures constant light, irrespective of mains-voltage fluctuations • Suitable for luminaires in protection class I and, after testing, class II • The universal connector Wago 251 offers the flexibility for horizontal-manual or push-in robot wiring or vertical ALF-robot wiring. Application • Used with movement-detection control systems like Philips OccuPlus • Indoor applications, such as office buildings, hospitals, supermarkets, department stores, industrial premises and schools • Class I outdoor applications, e. g. industrial premises and parking lots

Philips 913700648666 Nicht kategorisiert

Digitale Zünder für maximale Zuverlässigkeit HID-Zünder für Seriensysteme Produktvorteile • Einfache Installation und Verkabelung • Kann mit halbparallelen und Serien-Vorschaltgeräten betrieben werden • Digitale Zünder gewährleisten maximale Zuverlässigkeit Produktmerkmale • Zünder sind standardmäßig mit Schraubklemmenblöcken ausgestattet. Serie-Zündgerät funktioniert nur in Serienschaltungen Anwendungen im Freien (beliebteste Anwendung: Straßen- und Tunnelbeleuchtung) System Elektromagnetisches System erfordert Vorschaltgerät, Zündgerät und Kondensator Entwickelt, um nur in Serienschaltungen zu arbeiten Kein Zündgerät erforderlich für SON-I-Lampen