Treiber, Spulen & Transformatoren - Seite 2

Constant Current LED Driver / 30 W
dimmable, 12 V DC for LEDs up to 30 W total load

20W Treiber für LED-Schiene mit 3000 mm Kabel und Steckdosen. 1-10V Dimmung. Impuls-Dimmung. Achtung! Keine Phasendimmung. SG bietet eine 5-jährige Systemgarantie auf das Produkt, die ab Inbetriebnahme wirksam ist.

Schnelles LED-Netzteil, 150W, 24Vdc, IP20 Superflacher LED-Treiber.

• LED driver for cabinet lighting and mini downlights (350mA), 6 outputs
• Dimmable – leading or trailing edge
• Built-in thermofuse with auto reset
• Quick and easy installation
• Can be fastened by screws
• Do NOT plug in any LED lamps, when connected to power

Elektronisches Vorschaltgerät für HF-Röhren bis 2x14, 21, 28, 35S T5

Schneider Electric ATV320D15N4B Frequenzumwandler Schwarz

Snappy LED power supply, 75W, 24Vdc and Ip20LED driver.

An energy-efficient solutionHF-Performer EII PL-T/C/R/T5c is a slim and high-frequency electronic ballast for a wide range of CFL- ni applications. It is ideal for applications where high energy efficiency is required. The HF-Performer EII range has a robust design, meets all relevant international safety and performance standards and is energy-efficient (CELMA EEI A2). Product Benefits • Robust design that meets all relevant international safety and performance standards and ensures good energy efficiency • Automatic restart (after voltage dip or lamp exchange) ensures easy operation and hassle-free re-lamping • Suitable for DC emergency operation, 186 to 275 V (at -10 oC) and in line with IEC/EN 60598-22 luminaire normsProduct Features • 50,000-hour lifetime at maximum case temperature, combined with over 60,000 on/off switches on one lamp • Programmed, flicker-free, pre-heated start (< 1.5 s) which allows the lamp to be switched on and off without reducing useful lamp life • Active power factor correction to ensure constant light, irrespective of mains-voltage fluctuations • The unit is protected against excessive mains voltage and incorrect connections. Applications • Ideal for commercial indoor lighting applications where it is necessary to reduce the wattage per square meter or operating costs • Used with movement-detection control systems like Philips OccuPlus • Mainly for indoor applications such as spotlights, downlights and recessed fixtures used largely in retail stores, office buildings, supermarkets, hotels, convenience stores • Industrial premises with long operating hours

Philips 913700648666 Nicht kategorisiert

Kurzes LED-Netzteil, 250W, 24Vdc und IP20. Schlanker LED-Treiber.

Produktvorteile: Lange LampenlebensdauerKeine negativen Auswirkungen durch häufiges Ein- und AusschaltenAutomatischer Neustart nach LampenersatzPerfekter Lampenstart für Anwendungen mit BewegungssensorenVDE/VDE EMC zertifiziertes SystemSehr hohe Energieeffizienz durch AbschalttechnologieAnwendungsbereiche: Großraumbüros, Flure und LagerräumeÖffentliche GebäudeStreifenbeleuchtungGeeignet für Notbeleuchtung (DC-Betrieb)Geeignet für Leuchten der Schutzklasse I

Dimmbares Snappy LED-Netzteil, 75W, 24Vdc und IP20. LED-Netzteil, das mit einem Standard-Frontkanten- oder Rückkanten-Dimmer gedimmt werden kann.

EL1/2X18-42TCS 220-240V/50-60HZ Produktbeschreibung: HF-Vorschaltgerät

Treiber 18W 350 mA ist ein dimmbarer Treiber, der mit einer Verteilerdose mit 6 Ausgängen für eine praktische Beleuchtungsinstallation geliefert wird.

Dieser Treiber ist für die Verwendung mit gängigen Dimmern auf dem Markt ausgelegt und gehört zu einer Treiber-Serie, die in 4W-, 9W-, 18W- und 25W-Versionen erhältlich ist.

• 18W-Treiber mit 350 mA Ausgang
• Dimmbar mit gängigen Dimmern
• Inklusive Verteilerdose mit 6 Ausgängen

Eine funktionale Wahl zum Anschließen und Dimmen kompatibler Beleuchtungsinstallationen.

An energy-efficient solutionHF-Performer EII PL-T/C/R/T5c is a slim and high-frequency electronic ballast for a wide range of CFL- ni applications. It is ideal for applications where high energy efficiency is required. The HF-Performer EII range has a robust design, meets all relevant international safety and performance standards and is energy-efficient (CELMA EEI A2). Product Benefits • Robust design that meets all relevant international safety and performance standards and ensures good energy efficiency • Automatic restart (after voltage dip or lamp exchange) ensures easy operation and hassle-free re-lamping • Suitable for DC emergency operation, 186 to 275 V (at -10 oC) and in line with IEC/EN 60598-22 luminaire normsProduct Features • 50,000-hour lifetime at maximum case temperature, combined with over 60,000 on/off switches on one lamp • Programmed, flicker-free, pre-heated start (< 1.5 s) which allows the lamp to be switched on and off without reducing useful lamp life • Active power factor correction to ensure constant light, irrespective of mains-voltage fluctuations • The unit is protected against excessive mains voltage and incorrect connections. Applications • Ideal for commercial indoor lighting applications where it is necessary to reduce the wattage per square meter or operating costs • Used with movement-detection control systems like Philips OccuPlus • Mainly for indoor applications such as spotlights, downlights and recessed fixtures used largely in retail stores, office buildings, supermarkets, hotels, convenience stores • Industrial premises with long operating hours

Treiber 25W 350 mA ist ein dimmbarer Treiber, der mit einer Verteilerdose mit 6 Ausgängen für eine praktische Installation geliefert wird.

Der Treiber ist Teil einer Serie, die in 4W, 9W, 18W und 25W erhältlich ist, und ist für die Verwendung mit gängigen Lichtdimmern auf dem Markt ausgelegt.

Eine passende Wahl, wenn Sie einen 25W-Treiber mit Dimm-Unterstützung und mehreren Ausgangsanschlüssen benötigen.

ECG for FL and CFL - not dimmable. Product benefits: • Long lamp life • No adverse effect from frequent on/off switching • Automatic restart after lamp replacement • Perfect lamp start for applications with motion sensors • VDE/VDE EMC certified system • Very high energy efficiency due to cut-off technology • Areas of application: • Emergency lighting systems acc. to EN 50172 / DIN VDE 0108-100, industry, open-plan offices, corridors and storage rooms, public buildings, sports halls and factories, strip lighting • Suitable for emergency lighting (DC operation) • Modernization of existing systems. Product features: • Supply voltage: 220...240 V • Line voltage: 198...264 V • Line frequency: 0 Hz, 50 Hz...60 Hz • Lamp start with optimum filament preheating • Lifetime: up to 100,000 h (temperature at Tc = 65 °C, max. 10 % failure rate) • Energy Efficiency Index EEI: A2 BAT • Automatic shutdown of defective lamps and at end of life (EoL T.2) • Safety: to EN 61347-2-3 • Lamp operation: to EN 60929

Robust design, compact formHF-Matchbox Red is an affordable, reliable, compact, lightweight and high-frequency ballast for use with system wattages below 25 W in combination with TL mini, TL-D, TL5 and TL5c, PL-T/C, and PL-L/S lamps. The HF-M Red range has a robust design, meets all relevant international safety and performance standards and has an energy efficiency index (CELMA EEI) of A2. Product Benefits • Can be operated with movement-detection control systems. • Automatic restart (after voltage dip or lamp exchange) ensures easy operation and hassle-free re-lamping. • Suitable for use in class I or class II luminairesProduct Features • Over 60,000 on/off switches on one lamp (depending on lamp/ballast combination) • Suitable for emergency DC operation between 190 and 254 V • Programmed, flicker-free, pre-heated start (<0.8 s) which allows the lamp to be switched on and off without reducing useful lamp lifeApplication • Used with movement-detection control systems like Philips OccuPlus • Mainly for indoor applications such as spotlights, downlights, light boxes, and emergency and security fixtures used largely in retail stores, office buildings, hotels, private homes and residential buildings • Domestic applications such as outdoor garden lighting, garage areas, stairways

An energy-efficient solutionHF-Performer III TL-D is a slim and high-frequency electronic ballast for TL-D fluorescent lamps. It is ideal for applications where high energy efficiency is required. The HF-Performer III range has a robust design, meets all relevant international safety and performance standards and is energy-efficient (CELMA EEI A2 BAT). Product Features • Robust design for 100,000 hours lifetime at Ta = 50 C and over 100,000 on/off switching operations on one lamp • Programmed, flicker-free, pre-heated start (< 0.5 s) which allows the lamp to be switched on and off without reducing useful lamp life • Active power factor correction to ensure constant light, irrespective of mains-voltage fluctuations • The unit is protected against excessive mains voltage and incorrect connections. Product Benefits • The programmed start enables the lamp to be switched on and off without reducing useful lamp life. • DC emergency operation in line with IEC/EN 60598-22 luminaire norms • Smart power ensures constant light, irrespective of mains-voltage fluctuations • Suitable for luminaires in protection class I and, after testing, class II • The universal connector Wago 251 offers the flexibility for horizontal-manual or push-in robot wiring or vertical ALF-robot wiring. Application • Used with movement-detection control systems like Philips OccuPlus • Indoor applications, such as office buildings, hospitals, supermarkets, department stores, industrial premises and schools • Class I outdoor applications, e. g. industrial premises and parking lots

Knackiges LED-Netzteil, 50W, 12Vdc und IP20 Super schlanker LED-Treiber.

- 75 W LED-Treiber mit konstanter Spannung- Ausgangsspannung von 12 V- Lebensdauer (h): 30.000- Spannungsbereich (V): 198–264- Maximaltemperatur am Tc-Punkt (°C): 85- Umgebungstemperaturbereich: –15 °C .. +45 °C - IP-Schutzart: IP20 - Lebensdauer (h): 30.000 (weitere Details im Datenblatt)

Snappy LED power supply, 75W, 12Vdc, Ip20LED driver.

Knackiges LED-Netzteil - 350 mA, 6W, Ip20. Super schlanker LED-Treiber.

Konstanter Strom LED-Treiber / 30 W
dimmbare, 24 V DC für LEDs bis zu einer Gesamtlast von 30 W