Residual current fault current protective device RCD 3P + N, 40A, 400V, 30mA, Class A with N-terminal at the right side. Multi 9 residual current RCD (RCCB) protects people against electric shock by direct and indirect contact. In addition they protect installations against fire caused by the transition of the electric installations. This class A residual current circuit breaker is 3P + N pole, marked to 40A at 400V and has a sensitivity of 30 mA. The unit is equipped with test button on the front, 72 mm wide and suitable for mounting on DIN rail.

Schneider Electric NSYMM33 Schaltkastenzubehör

early-break/late-make auxiliary contact block - VARIO - 1 NO + 1 NC

Spacial S3D plain door with mount.plate. H600xW400xD250.IP66 IK10 RAL7035.

Schneider Electric XESD1291

Schneider Electric XB5

Kontaktblock ZB2 - Rückstellung durch Feder - 1 Öffner - langsam schließend - Frontmontage

TeSys GV2 - Leistungsschalter - thermomagnetisch - 9...14 A - Schraubklemmen

Sanftanlasser für Asynchronmotor - ATS01 - 6 A - 110..480V - 0,75..3 KW

Schneider Electric XPSMCMCP0802 Nicht kategorisiert

Wandersteckdose PK PratiKa Connect 32Amp 250 VAC IP44

Schaltlasttrennschalter VBF - 3 - 690 V 125 A - abschließbarer langer schwarzer Griff

Schaltlasttrennschalter VBF - 3 - 690 V 12 A - abschließbarer schwarzer Griff

Schneider Electric NSYS3D6420P Elektrische Abdeckung IP66

Schneider Electric XB5AA3351 Elektroschalter Drucktasten-Schalter Schwarz

Schneider Electric A9Z64463 Stromunterbrecher Fehlerstromschutzschalter Typ B-SI 4

Montageplatte aus verzinktem Stahl, Dicke 15 mm für Kästen von H275W225 mm

Acti9 IC60 RCBO 4P 32A 300mA C 6kA A. For protection of end circuit, and protection of people against electric shock at direct contact ( 30 mA). As well as earth leakage at front plate.

Schneider Electric iC60 RCBO Stromunterbrecher 4P

This Resi9 is a modular residual current breaker with overcurrent protection (RCBO). It is a 1P+N circuit breaker with 1 protected pole and 10A In rated current and C tripping curve. The earth leakage protection class is A type with a sensitivity of 30mA. The earth-leakage protection time delay is instantaneous. The Icn rated short circuit breaking capacity is up to 6000A according EN/IEC 61009-2-1 standard. This product protects against short circuit, cable overload, electrical shock by indirect contact and fire hazards. It brings safety, reliable solution for commercial and industrial applications with high breaking capacity. This product is compliant with EN/IEC 61009-2-1 standard. It has an electrical endurance going up to 7500 cycles and a mechanical endurance going up to 20000 cycles. The Ue operational voltage is 230VAC. It is DIN rail mountable. The width in 9mm pitches is 4. The product color is white (RAL9003). The dimensions are (W) 36mm x (H) 82mm x (D) 70.5mm. The weight is 186g. It has an IP20 degree of protection (as per IEC/EN 60529 standard) and becomes IP40 once in modular enclosure. The operating temperature is from -25°C to -60°C.

Gelbe Station 1 roter Pilzkopf-Druckknopf Ø40 Schlüssel zum Freigeben 1NO + 2NC

This Acti9 iC60N is a low voltage miniature circuit breaker (MCB). It is a 2P circuit-breaker with 2 protected poles, 6A rated current and C tripping curve. It can be mounted on DIN rail for modular installation. As circuit-breaker, its breaking capacity, according to IEC/EN 60898-1, is 6000A at 400VAC. As circuit-breaker, its breaking capacity, according to IEC/EN 60947-2, is 20kA at 230VAC and 10kA at 400VAC. This miniature circuit breaker protects circuits against short circuit and overload currents. It has an IP20 degree of protection (as per IEC/EN 60529) on its terminals. It becomes IP40 once in modular enclosure with insulation class II. its fast closing mechanism improves its service life. Its limitation class 3 (according to EN/IEC60898-1) improves downstream circuit protection cost. Its unique Visitrip indicator reduces intervention time by showing the faulty circuit. Its Visisafe green strip guarantees the physical opening of the contacts to allow downstream maintenance. This double terminal miniature circuit breaker reflects Schneider Electric expertise with more than 40 years developing modular devices for the protection of electrical circuits in all applications. It has a longer service life thanks to its high limitation and fast closing. This product is compliant with both IEC 60898-1 and IEC 60947-2, has IP20B finger proof terminals with double the tightening torque versus the standard and is DIN rail mountable. It offers VisiTripTM for safety during maintenance and VisiSafeTM to reduce intervention time.

Resi9 CX is a surface-mounted distribution enclosure that can accommodate all types of modular switchgear.Mountingbb 4 oblong holes allow very quick horizontalityadjustment of the back.bb 4 screws for fast mounting on the insulating back.Removable DIN railbb The DIN rails can beremoved for easiercable routing.A large number of slots for terminal blocksbb The terminal block supports are clipped onto the top orbottom of the frame in many different ways.Each symmetrical rail has a hoodacity of26 modules of 9 mm (13 modules of 18 mm) or36 modules of 9 mm (18 modules of 18 mm).Considerable space is available under the frame.It allows insertion of cables and hands for easyinstallation.Easy entry cablebb The 4 surfaces of the hood are pre-cut out to insertcables or trunkings.bb The cables can enter via the 4 sides or via the bottom ofthe enclosure.

This Resi9 product is a switch disconnector. It is a 4 poles switch disconnector with 40A rated current at 415VAC. This switch disconnector is used for control (opening and closing of circuits under load). This product is also used for disconnection of on-load electrical circuits already protected against overload and short-circuits. Electrical endurance goes up to 10000 cycles . Mechanical endurance goes up to 50000 cycles . The Ui rated insulation voltage is 500 VAC. It has a Uimp rated impulse withstand voltage of 6kV. The operating frequency is 50Hz or 60Hz. It can be mounted on a DIN rail for modular installation. Its width is 8 pitches of 9mm. The dimensions are (W) 72mm x (H) 81mm x (D) 70.5mm . The product weight is 309g. The color is white (RAL9003). According to IEC 60529 standard, the degree of protection is IP20 or IP40 in modular enclosure. The operating temperature is -25°C to 60°C. The storage temperature is -40°C to 85°C. This product complies with EN/IEC 60669-2-4 standard.

3-Phasen-Kilowattstundenmesser für DIN-Schienenmontage. Messung in 4 Quadranten, mehrere Tarife mit Zähler und Modbus-Kommunikation, digitale Ein- / Ausgänge und MID-zertifiziert. Dieses Modell bietet eine direkte Messung von I, D, P, Q, S und E bis zu 1/5 A (abhängig von)