Schneider Electric - Seite 2

Schneider Electric iCV40N Stromunterbrecher 3P + N

Acti9 IC60 RCBO 4P 20A 30mA C 6kA A. For protection of end circuit, and protection of people against electric shock at direct contact ( 30 mA). As well as earth leakage at front plate.

iC60N - miniature circuit breaker - 4P - 32A - C curve

This Acti9 iCT is a modular and reliable contactor. It is a 1P remote control device with 1 normally open contact. Rated current is 25A for AC-7a and 8.5A for AC-7b. Operating voltage is 250VAC and a control voltage is 230VAC to 240VAC. Electrical endurance goes up to 100000 cycles for AC-7A or AC-1, 30000 cycles for AC-7C, AC-7B, AC-3, AC-5A or AC-5B. The maximum switching operations is 100 per day. The degree of protection is IP20 and IP40 in an enclosure. It is DIN rail mountable. This device could be used for remote switching small motors (fans, mixers) or HVAC system applications. It is compatible with all the Acti9 control auxiliaries, for heating & ventilation control applications. This product is compliant with IEC/EN 61095.

The Wiser Multiwire LED Dimmer Puck from Schneider Electric is a puck dimmer used to control and dim LED light sources and resistive or capacitive loads. Multiwire technology - it works with and zero conductor. It can be controlled remotely with the Wiser app and can be controlled locally with mechanical push buttons. The dimmer is built on and certified according to the ZigBee 3.0 protocol. It is equipped with green/red/orange LED programming indicator. Thanks to the Multiwire technology, it can operate LED loads below 1W/VA with the neutral conductor connected. The device has overheating protection, short circuit protection and automatic overload protection. The nominal operating voltage is 220-240VAC at 50/60 Hz. Power consumption in standby mode is less than 0.3W. The load handling of 230V LED light is 200W, incandescent lamp and 230V halogen lamp is 300W and halogen lamp with standard electronic transformer is 300W. This unit is designed for installation in either a PL or membrane box. The product dimensions are (W) 45mm x (H) 45mm x (D) 18.5mm and the product weight is 23g. The product's color is white/green. The ambient air temperature for operation is from -5°C up to +35°C. It achieves IP20 degree of protection. Wiser offers intelligent integration of various wireless devices and provides an enriching and energy-optimizing control thanks to the Wiser app. Wiser Gateway is required to use the app and to achieve full functionality. The product complies with CE, RoHS, Zigbee 3.0 certifications.

Schneider Electric A9Z21440 Stromunterbrecher 4

Verzögerungszeitrelais - 1 s..100 h - 24..240 V AC - 1 OC

HELL: Holen Sie sich die beste Visualisierung in Ihrer Anlage Ultra helle LED 360° Sichtbarkeit Homogenes Licht, reine Farbe Lange Lebensdauer Geringer Stromverbrauch INNOVATIV: Passen Sie Ihre Signalleuchte einfach an Multicolor-LED-Einheit 6 Farben, rot grün blau gelb oder

Schneider Electric XALD134 Zubehör für elektrische Schalter Griff

Dieser Acti9 iC60N ist ein Niederspannungs-Miniatur-Leitungsschutzschalter (MCB). Es handelt sich um einen 1P+N Leitungsschutzschalter mit einem geschützten Pol, einem Nennstrom von 16A und einer C-Auslösekurve. Er kann auf einer DIN-Schiene für eine modulare Installation montiert werden. Als Leitungsschutzschalter beträgt seine Auslösekapazität gemäß IEC/EN 60898-1 bei 230VAC 6000A. Als Leistungsschalter beträgt seine Auslösekapazität gemäß IEC/EN 60947-2 bei 230VAC 10kA. Dieser Miniatur-Leitungsschutzschalter schützt Schaltkreise vor Kurzschluss- und Überlastströmen. Er hat einen IP20-Schutzgrad (gemäß IEC/EN60529) an seinen Anschlüssen. Im modularen Gehäuse mit Isolationsklasse II wird er zu IP40. Sein schneller Schließmechanismus verbessert seine Lebensdauer, während die Begrenzungsklasse III (gemäß EN/IEC60898-1) den Kostenschutz für nachgeschaltete Schaltkreise verbessert. Sein einzigartiger Visitrip-Anzeiger reduziert die Interventionszeit durch Anzeigen des fehlerhaften Stromkreises, während sein Visisafe grüner Streifen die physische Öffnung der Kontakte zur nachgeschalteten Wartung garantiert.

TeSys D Thermische Überlastrelais - 9...13 A - Klasse 10A

Schneider Electric A9A15215 Türklingel-Tranformator

Argus standard outdoor 120 - blister

Schneider Electric iID Stromunterbrecher 2P

Resi9 CX is a surface-mounted distribution enclosure that can accommodate all types of modular switchgear.Mountingbb 4 oblong holes allow very quick horizontalityadjustment of the back.bb 4 screws for fast mounting on the insulating back.Removable DIN railbb The DIN rails can beremoved for easiercable routing.A large number of slots for terminal blocksbb The terminal block supports are clipped onto the top orbottom of the frame in many different ways.Each symmetrical rail has a hoodacity of26 modules of 9 mm (13 modules of 18 mm) or36 modules of 9 mm (18 modules of 18 mm).Considerable space is available under the frame.It allows insertion of cables and hands for easyinstallation.Easy entry cablebb The 4 surfaces of the hood are pre-cut out to insertcables or trunkings.bb The cables can enter via the 4 sides or via the bottom ofthe enclosure.

Schneider Electric A9F04713 Stromunterbrecher 3

Schneider Electric A9C21732 Hilfskontakt

Schneider Electric iID Stromunterbrecher 4P

iC60N - Leitungsschutzschalter - 3P - 40A - C-Kurve

Schneider Electric LC1D09BL Hilfskontakt

TeSys GV2 & GV3 - auxiliary contact - 1 NO + 1 NC

TeSys K Schütz - 3P(3 NO) - AC-3 - <= 440 V 12 A - Spule mit 230 V AC

Schneider Electric LC1D25F7 Hilfskontakt

This Acti9 iC60N is a low voltage miniature circuit breaker (MCB). It is a 3P circuit-breaker with 3 protected poles, 16A rated current and C tripping curve. It can be mounted on DIN rail for modular installation. As circuit-breaker, its breaking capacity, according to IEC/EN 60898-1, is 6000A at 400VAC. As circuit-breaker, its breaking capacity, according to IEC/EN 60947-2, is 20kA at 230VAC and 10kA at 400VAC. This miniature circuit breaker protects circuits against short circuit and overload currents. It has an IP20 degree of protection (as per IEC/EN 60529) on its terminals. It becomes IP40 once in modular enclosure with insulation class II. its fast closing mechanism improves its service life. Its limitation class 3 (according to EN/IEC60898-1) improves downstream circuit protection cost. Its unique Visitrip indicator reduces intervention time by showing the faulty circuit. Its Visisafe green strip guarantees the physical opening of the contacts to allow downstream maintenance. This double terminal miniature circuit breaker reflects Schneider Electric expertise with more than 40 years developing modular devices for the protection of electrical circuits in all applications. It has a longer service life thanks to its high limitation and fast closing. This product is compliant with both IEC 60898-1 and IEC 60947-2, has IP20B finger proof terminals with double the tightening torque versus the standard and is DIN rail mountable. It offers VisiTripTM for safety during maintenance and VisiSafeTM to reduce intervention time.

Schneider Electric iC60 RCBO Stromunterbrecher 4P