Pumpen - Seite 2

Pump for Water in one family houses

SANIFLO ist eine Abwasserpumpe, die die Spülmasse aus einer Toilette zerkleinert und das Abwasser zum nächstgelegenen Abfluss pumpt. Ideal z. B. für Keller- und Dachräume oder andere Räume, in denen ein zusätzliches WC gewünscht wird.

Salus EP Electronic A-class circulation pump for heating systems and other non-corrosive liquids, ensuring high comfort and low energy consumption.The EP circulation pump is mainly used for water circulation in home heating, and is best suited for the following system:• Stable heating system with variable flow• Heating system with variable pipeline temperature• Industrial circulation system• House and apartment heating systemsThe EP circulation pump can adjust the electric pump's performance automatically and continuously to meet the actual needs of the systemThe EP circulation pump is equipped with a control panel on the front, which is convenient for users. Easy installation and startupEP circulation pump has automatic adaptation mode AUTO (factory setting). In most cases, you can start the pump without making any adjustments and let it automatically adjust to meet the actual needs of the system. High comfortThe operating noise of the pump is low. Low energy consumptionCompared to the conventional circulation pump, its energy consumption is very low. The minimum energy consumption for the EP circulation pump can reach 5 W.EP circulation pump does not need external motor protection. Check whether the voltage and frequency of the power supply correspond to the parameters indicated on the pump nameplate. Use the pump's corresponding connector to connect the power supply (EPPLUG).

Mit ALPHA2 GO kann der Installateur nun den Großteil aller Stand-alone-Umwälzpumpen und nahezu 70% der Pumpen ersetzen, die in Fernwärmeunits, Gasheizkesseln und Wärmepumpen nach 2015 integriert sind. Einbaumaß: 180mm

MAGNA3 40-100 FMAGNA3 – More than a pumpWith its unrivalled efficiency, all-encompassing range and built-in communication capabilities plus functionalities replacing system components, the MAGNA3 is ideal for engineers and specifiers looking to create high-performance systems for buildings. This pump in the Grundfos Master Class will fit both heating and cooling applications perfectly, making it the obvious choice for almost any building project – old or new.The MAGNA3 is of the canned-rotor type, i.e. pump and motor form an integral unit without shaft seal and with only two gaskets for sealing. The bearings are lubricated by the pumped liquid.The innovative clamp with only one screw enables easy repositioning of the pump head. The MAGNA3 is a pump with no maintenance requirements and with extremely low Life Cycle Cost.The pump is characterised by the following:• controller integrated in the control box• control panel with TFT display on the control box• control box prepared for optional CIM modules• built-in differential-pressure and temperature sensor• cast-iron pump housing (depending on model)• carbon-fibre-reinforced composite rotor can• stainless-steel bearing plate and rotor cladding• aluminium alloy stator housing• air-cooled power electronicsThe MAGNA3 is a single-phase pump.Characteristic features• AUTOADAPT.• FLOWADAPT and FLOWLIMIT (more than a pump function as it reduces the need for pump throttling valves).• Proportional-pressure control.• Constant-pressure control.• Constant-temperature control.• Constant-curve duty.• Max. or min. curve duty.• Automatic Night Setback.• No external motor protection required.• Insulating shells supplied with single-head pumps for heating systems.• Large temperature range where the liquid temperature and the ambient temperature are independent of each other.CommunicationThe MAGNA3 enables communication via the following:• wireless Grundfos GO Remot

SOLOLIFT2 WC-1Sololift2 WC-1 is a small, compact automatic lifting station suitable for pumping of wastewater off places in private dwellings where wastewater cannot be led directly to the sewer by means of a natural downward slope.Sololift2 WC-1 is suitable for pumping wastewater from a toilet containing toilet paper and faeces with an additional connection on the lid for e.g. a washbasin.The pumping of liquids containing other material may cause faults and limit the scope of our guarantee.Sololift2 WC-1 is typically used to dewater:• toilet and washbasin in basements below sewer level, in connection with the renovation or modernisation of existing buildings, where the location may be remote from the main soil pipe so that a natural slope cannot be established.The compact lifting station is equipped with- Cable with or without plug (see technical data)- Horizontal or vertical fastening possibility of discharge hose connector with several adaptors for pipes wi

MAGNA3 40-100 FMAGNA3 – More than a pumpWith its unrivalled efficiency, all-encompassing range and built-in communication capabilities plus functionalities replacing system components, the MAGNA3 is ideal for engineers and specifiers looking to create high-performance systems for buildings. This pump in the Grundfos Master Class will fit both heating and cooling applications perfectly, making it the obvious choice for almost any building project – old or new.The MAGNA3 is of the canned-rotor type, i.e. pump and motor form an integral unit without shaft seal and with only two gaskets for sealing. The bearings are lubricated by the pumped liquid.The innovative clamp with only one screw enables easy repositioning of the pump head. The MAGNA3 is a pump with no maintenance requirements and with extremely low Life Cycle Cost.The pump is characterised by the following:• controller integrated in the control box• control panel with TFT display on the control box• control box prepared for optional CIM modules• built-in differential-pressure and temperature sensor• cast-iron pump housing (depending on model)• carbon-fibre-reinforced composite rotor can• stainless-steel bearing plate and rotor cladding• aluminium alloy stator housing• air-cooled power electronicsThe MAGNA3 is a single-phase pump.Characteristic features• AUTOADAPT.• FLOWADAPT and FLOWLIMIT (more than a pump function as it reduces the need for pump throttling valves).• Proportional-pressure control.• Constant-pressure control.• Constant-temperature control.• Constant-curve duty.• Max. or min. curve duty.• Automatic Night Setback.• No external motor protection required.• Insulating shells supplied with single-head pumps for heating systems.• Large temperature range where the liquid temperature and the ambient temperature are independent of each other.CommunicationThe MAGNA3 enables communication via the following:• wireless Grundfos GO Remot

Sparepart for Vortex

Smedegaard Simflex 25-40 1x230V 180 mm circulation pump 112.

Pumpe liefert 1300 W Leistung mit bis zu 5.5 bar Druck und einer Fördermenge von 6000 l/h.

Metabo P 6000 Inox ist für anspruchsvolle Pumpaufgaben konzipiert und kombiniert hohe Leistung mit starkem Druck und Durchfluss für eine effiziente Wasserförderung.

• 1300 W Motor
• Max. Druck: 5.5 bar
• Fördermenge: 6000 l/h
• Hersteller: Metabo

Die hohe Leistung hilft Ihnen, Wasser schneller zu fördern und den Arbeitsablauf reibungslos zu halten.

Die ALPHA2 ist in der Lage, den harten Bedingungen in einem Heizsystem standzuhalten, und mit vier neu hinzugefügten Funktionen wurde sie noch robuster: Robuster Start: Befreit die Pumpe am Anfang der Heizsaison von Verunreinigungen. Sommermodus: Einstellung der Leistung der Pumpe im Sommer auf die wärmere Außentemperatur - für zusätzliche Energieeffizienz. Magnetitbeständigkeit: Stellt sicher, dass keine kleinen Metallteile in den wichtigen Teilen der Pumpe stecken bleiben, wenn sie magnetisiert sind. Trockenlaufschutz: Stellt sicher, dass die Pumpe niemals ohne Flüssigkeit im System läuft - hinzu kommt eine unübertroffene Energieeffizienz, einfache Installation und die Tatsache, dass ALPHA2 sowohl Ihre Heizanforderungen als auch bis zu 90 % Ihrer Klimaanforderungen abdeckt.Die GRUNDFOS ALPHA2 eignet sich für:Systeme mit konstantem oder variablem DurchflussEinrohrsystemeZweirohrsystemeFußbodenheizungWarmwasser-ZirkulationssystemeSysteme mit Nachtabsenkung erforderlichMerkmale und VorteileBessere Leistung bei marktführender Effizienz (EEI0.15) in einem kompakteren DesignNeuer Durchflussmesser zur Fehlerbehebung und zum AusgleichAUTOADAPT wählt beste Leistungskurve für Effizienz und KomfortInnovativer Stecker vereinfacht PumpenanschlussIsolierschalen enthalten.

Pump for Water in one family houses

Die Premium-Wahl, wenn die Systemsteuerung und Überwachung entscheidend sind. Die MAGNA3 unterstützt Feldbus durch optionale CIM-Module und verfügt über ein TFT-Display zur intuitiven Konfiguration der intelligenten Funktionen. Anwendungen: Heizung, Klimatisierung, Pumpendesigns: Dosenrotor Technische Daten: Maximaler Kopf: 18,88 m Flüssigkeitstemperatur: -10 .. 110 ° C Maximaler Durchfluss: 76,6 m3 / h P max : 16 bar

Mit ALPHA2 GO kann der Installateur nun den Großteil aller Stand-alone-Umwälzpumpen und nahezu 70% der Pumpen ersetzen, die in Fernwärmeunits, Gasheizkesseln und Wärmepumpen nach 2015 integriert sind. Einbaumaß: 130mm

MAGNA3 40-120 FMAGNA3 – More than a pumpWith its unrivalled efficiency, all-encompassing range and built-in communication capabilities plus functionalities replacing system components, the MAGNA3 is ideal for engineers and specifiers looking to create high-performance systems for buildings. This pump in the Grundfos Master Class will fit both heating and cooling applications perfectly, making it the obvious choice for almost any building project – old or new.The MAGNA3 is of the canned-rotor type, i.e. pump and motor form an integral unit without shaft seal and with only two gaskets for sealing. The bearings are lubricated by the pumped liquid.The innovative clamp with only one screw enables easy repositioning of the pump head. The MAGNA3 is a pump with no maintenance requirements and with extremely low Life Cycle Cost.The pump is characterised by the following:• controller integrated in the control box• control panel with TFT display on the control box• control box prepared for optional CIM modules• built-in differential-pressure and temperature sensor• cast-iron pump housing (depending on model)• carbon-fibre-reinforced composite rotor can• stainless-steel bearing plate and rotor cladding• aluminium alloy stator housing• air-cooled power electronicsThe MAGNA3 is a single-phase pump.Characteristic features• AUTOADAPT.• FLOWADAPT and FLOWLIMIT (more than a pump function as it reduces the need for pump throttling valves).• Proportional-pressure control.• Constant-pressure control.• Constant-temperature control.• Constant-curve duty.• Max. or min. curve duty.• Automatic Night Setback.• No external motor protection required.• Insulating shells supplied with single-head pumps for heating systems.• Large temperature range where the liquid temperature and the ambient temperature are independent of each other.CommunicationThe MAGNA3 enables communication via the following:• wireless Grundfos GO Remot

Adapter-Set komplett DN 40-PN10 30mm

Mit ALPHA2 GO kann der Installateur nun den Großteil aller Stand-alone-Umwälzpumpen und nahezu 70% der Pumpen ersetzen, die in Fernwärmeunits, Gasheizkesseln und Wärmepumpen nach 2015 integriert sind. Einbaumaß: 180mm

Sparepart for Vortex

MAGNA3 40-100 FMAGNA3 – More than a pumpWith its unrivalled efficiency, all-encompassing range and built-in communication capabilities plus functionalities replacing system components, the MAGNA3 is ideal for engineers and specifiers looking to create high-performance systems for buildings. This pump in the Grundfos Master Class will fit both heating and cooling applications perfectly, making it the obvious choice for almost any building project – old or new.The MAGNA3 is of the canned-rotor type, i.e. pump and motor form an integral unit without shaft seal and with only two gaskets for sealing. The bearings are lubricated by the pumped liquid.The innovative clamp with only one screw enables easy repositioning of the pump head. The MAGNA3 is a pump with no maintenance requirements and with extremely low Life Cycle Cost.The pump is characterised by the following:• controller integrated in the control box• control panel with TFT display on the control box• control box prepared for optional CIM modules• built-in differential-pressure and temperature sensor• cast-iron pump housing (depending on model)• carbon-fibre-reinforced composite rotor can• stainless-steel bearing plate and rotor cladding• aluminium alloy stator housing• air-cooled power electronicsThe MAGNA3 is a single-phase pump.Characteristic features• AUTOADAPT.• FLOWADAPT and FLOWLIMIT (more than a pump function as it reduces the need for pump throttling valves).• Proportional-pressure control.• Constant-pressure control.• Constant-temperature control.• Constant-curve duty.• Max. or min. curve duty.• Automatic Night Setback.• No external motor protection required.• Insulating shells supplied with single-head pumps for heating systems.• Large temperature range where the liquid temperature and the ambient temperature are independent of each other.CommunicationThe MAGNA3 enables communication via the following:• wireless Grundfos GO Remot

Mobiles Produkt zur hydraulischen Abgleich von Heizkörpern in Kombination mit einer ALPHA3-Pumpe und einem Smartphone mit der installierten "Go Balance"-App, die für iOS- und Android-Geräte verfügbar ist. Zur vorübergehenden Montage an der ALPHA3-Pumpe

ALPHA2 is able to withstand the tough conditions in a heating system, and with four newly added features, it just got even tougher:Robust start-up:Shakes free any impurities before the pump starts at the beginning of the heating season.Summer mode:Adjustment of the pump’s performance in the summer to the warmer temperature outside – giving customers extra energy efficiency.Magnetite resistance:Ensures that no small pieces of metal get stuck in the pump’s vital parts when they are magnetised.Dry-running protection:Makes sure the pump never runs without liquid in the system - add to that unrivalled energy efficiency, easy installation and the fact that ALPHA2 covers both your heating demands and up to 90 % of your air-conditioning and cooling demands.The GRUNDFOS ALPHA2 is suitable for:• Systems with constant or varying flow• One pipe systems• Two pipe systems• Underfloor-heating• Domestic hot-water recirculation• Systems where night setback is required.Features and benefits• Better performance with market leading efficiency (EEI0.15) in a more compact design• New flow meter for trouble-shooting and balancing• AUTOADAPT selects best performance curve for efficiency and comfort• Innovative plug simplifies pump connection• Insulation shells included.

Unilift AP12.40.06.1 Tauchpumpe Typ Vertikale einstufige Edelstahl-Tauchpumpe mit vertikalem Auslass und integriertem einphasigem, vollständig geschlossenem Motor der Isolationsklasse F mit thermischem Überlastschutz. Die Pumpe ist mit einem Saugkorb ausgestattet.Das Laufrad ist ein HALBOFFENES Laufrad für 12 mm freien Durchgang und eignet sich zum Pumpen von Grundwasser, Oberflächenwasser, Regenwasser und ähnlichem.Die Pumpe hat eine doppelte Wellendichtung und eine Zwischenöl-Kammer, die mit ungiftigem Spezialöl vorgefüllt ist.Die Pumpe verfügt über einen Steigröhrchenanschluss, einen Kühlkörper zur kontinuierlichen Kühlung des Motors durch die gepumpten Flüssigkeit sowie langlebige Rillenkugellager für den Lebensdauerschmierungsbetrieb.Die Pumpe ist gebrauchsfertig ausgestattet mit Tragegriff und wird inklusive eines 10 m Netzkabels geliefert. Das Netzkabel hat einen Steckertyp mit Glasversiegelungsmittel in der Buchse zur Verhinderung des Eindringens von Feuchtigkeit in die Statorwicklung.Flüssigkeit:Flüssigkeitstemperaturbereich:0 .. 55 °CTechnische Daten:Laufradtyp:HALBOFFENMaximale Partikelgröße:12 mmMaterialien:Pumpengehäuse:EdelstahlPumpengehäuse:DIN W.-Nr. 1.4301Pumpengehäuse:AISI 304Laufrad:EdelstahlLaufrad:DIN W.-Nr. 1.4301Laufrad:AISI 304Installation:Pumpenauslass:Rp 1 1/2Maximale Installationshöhe:10 mElektrische Daten:Motortyp:PSCLeistungsaufnahme - P1:0,9 kWRated voltage:Einphasig, AC,230 VRated current:Nennstrom bei Volllast (A):4,4 ACos phi - Leistungsfaktor:Nennleistungsfaktor bei Volllast (cos φ):0,99Rated speed:Bemessungsdrehzahl (U/min):2785 rpmKondensatorgröße - Lauf:C-Rating des Kondensators im Betrieb (F/V):16 F/400 VSchutzart nach IEC EN60529 und DIN40050-9 :IP68Isolationsklasse nach IEC EN60034-5:FNettogewicht der Pumpe ohne Verpackung :12 kgBruttogewicht der Pumpe mit Verpackung :12.5 kg

Unilift AP35B.50.06.1.VSubmersible effluent pumpVertical single-stage stainless steel submersiblepump with integrated submersible 1-phasemotor. The pump is fitted with ring stand and carryinghandle and is supplied with a 10 m mainscable. The impeller is a VORTEX impeller for35 mm free passage suitable for pumpingsurface water, groundwater, wastewater andsimilar.The pump has a double shaft seal and anintermediate oil chamber pre-filled with non-toxicspecial oil. The motor is insulation class F with thermaloverload protection and has long-life deep-groovegreased-for-life ball bearings.The pump has R 2' discharge port and isready for installation either free-standing oron an auto-coupling system.Liquid:Maximum liquid temperature:40 °CTechnical:Type of impeller:VORTEXMaximum particle size:35 mmMaterials:Pump housing:Stainless steelPump housing:DIN W.-Nr. 1.4301Pump housing:AISI 304Impeller:Stainless steelImpeller:DIN W.-Nr. 1.4301Impeller:AISI 304Installation:Pump outlet:R 2'Maximum installation depth:7 mElectrical data:Type of motor:PSCPower input - P1:1 kWRated voltage:1 x 230 VRated current:4.6 ACos phi - power factor:0,98Rated speed:2810 rpmCapacitor size - run:16 F/400 VEnclosure class (IEC 34-5):IP68Insulation class (IEC 85):FLength of cable:10 mType of cable plug:SCHUKOOthers:Net weight:9.82 kg

Kit,Shaft seal CR/N32/45/90/120/150 HQQE

MAGNA3 40-100 FMAGNA3 – More than a pumpWith its unrivalled efficiency, all-encompassing range and built-in communication capabilities plus functionalities replacing system components, the MAGNA3 is ideal for engineers and specifiers looking to create high-performance systems for buildings. This pump in the Grundfos Master Class will fit both heating and cooling applications perfectly, making it the obvious choice for almost any building project – old or new.The MAGNA3 is of the canned-rotor type, i.e. pump and motor form an integral unit without shaft seal and with only two gaskets for sealing. The bearings are lubricated by the pumped liquid.The innovative clamp with only one screw enables easy repositioning of the pump head. The MAGNA3 is a pump with no maintenance requirements and with extremely low Life Cycle Cost.The pump is characterised by the following:• controller integrated in the control box• control panel with TFT display on the control box• control box prepared for optional CIM modules• built-in differential-pressure and temperature sensor• cast-iron pump housing (depending on model)• carbon-fibre-reinforced composite rotor can• stainless-steel bearing plate and rotor cladding• aluminium alloy stator housing• air-cooled power electronicsThe MAGNA3 is a single-phase pump.Characteristic features• AUTOADAPT.• FLOWADAPT and FLOWLIMIT (more than a pump function as it reduces the need for pump throttling valves).• Proportional-pressure control.• Constant-pressure control.• Constant-temperature control.• Constant-curve duty.• Max. or min. curve duty.• Automatic Night Setback.• No external motor protection required.• Insulating shells supplied with single-head pumps for heating systems.• Large temperature range where the liquid temperature and the ambient temperature are independent of each other.CommunicationThe MAGNA3 enables communication via the following:• wireless Grundfos GO Remot