PEX-Systeme - Seite 3

Used for For pipe in 34 mm

Messingverteiler mit 4 Anschlüssen für Wasser- und Heizsysteme.

Uponor Smart Aqua tap elbow Q&E NKB DR 15 mm x 12 L= 43 mm.

Fitting in gunmetal for Roth manifold

Fitting in gunmetal for Roth manifold

Pair of termination boxes including two Q&E termination elbows in DR-brass with white Q&E rings, metal mounting bracket for mounting c/c 150mm and mounting screws. For water proof connection with PE-Xa pipes and Uponor conduit in all types of walls, according to NT VVS 129.

Uponor 1089673 Rohrschneider

For dry wall, push

HENCO VISION brass nipple adapter 20 x 1/2 to distribution pipes for water, heating and cooling installations Max. 16 bar

Uponor 1001337 Sanitärarmatur Endzufuhr-Verschlusskappe

Wallbox for 15 mm pex pipe, in gunmetal.

Flow-optimised press connector system for drinking water installations in acc. with DIN 1988 and DIN 50930-6 as well as heating installations, tested in acc. with DVGW worksheet W 534.Press connectorsSafe and fast processing without calibration of the pipe ends through O-ring-free press technology in all dimensions. In this way, widening or calibration of the pipe-ends becomes superfluous and reduces the assembly times. The interaction between aerodynamic radii and minimal cross-section narrowings ensure the lowest pressure losses in press systems for multilayer pipes. This allows a smaller dimensioning of drinking water installations and reduces the pipeline volume.SC-ConturAll sizes with SC-Contur – connections, which remain unpressed become visible when the system is filled. The SC-Contur is certified and fulfils the requirements of DVGW worksheet W 534, point 12.14, connectors with forced leakage.During leakage tests with water, Viega guarantees the identification of unpressed connections in the pressure range 0.1 MPa–0.65 MPa, in the case of a dry leakage test with compressed air or noble gases from 22 hPa–0.3 MPa.MarkingGreen dot on the press connectionPipesRaxofix PE-Xc/Al/PE-Xc•dimensionally stable, oxygen-proof in acc. with DIN 4726, greyRaxofix PE-Xc•flexible, blackDimensionsPress connectors and pipes•Raxofix-PE-Xc/Al/PE-Xc: d 16/20/25/32/40/50/63•Raxofix PE-Xc: d 16/20Areas of application PE-Xc/Al/PE-XcDrinking waterHeatingRainwaterCompressed airAreas of application PE-XcRainwaterDrinking waterUse of the system for application areas other than those described here must be agreed with Viega Service Center.Operating conditionsDrinking water installations•Operating temperature max. 70 °C•Operating pressure max. 1.0 MPaHeating installations•Operating temperature max. 80 °C•Operating pressure max. 1.0 MPaIrrelevant of the direction of flow, mixed installations are permitted.NoteThe DVGW test mark is only valid f

Uponor 1008663 Sanitärarmatur Armaturenanschluss

For dry wall, push

Roth QuickBox®-316 for stonewall,18 mm x 3/4" push, db

Roth female tee 15 x 15mm x 1/2" for PEX, CU and Stainless steel

used for Roth manifold in gunmetal

Used for QuickBox in plate walls.Remember to order Ø4 x 60 mm screws to fasten the junction boxes, use 2-4 screws per. junction box.

Manifold cabinet for Roth floorheating manifold

Transition from 18 mm to pipe thread.

Quickbox double for stone wall

Verbinden Sie eine 15x2,5 Wandanschluss mit Cc. 150mm auf einer Halterung montiert. Getestet für den Einsatz in feuchten Bereichen. Der Wandanschluss passt zu 15x2,5 PEX und 20/25 gewellten Rohren. Der Messingteil besteht aus DZR-Messing für Trinkwasser. Der Kunststoffteil besteht aus PE.

Mehrfachverteiler für Wasser TEA 2 Auslässe 15/10 mm Anschlüsse

Transition from 22 mm to pipe thread.

Roth manifold with 4 outlets. Used together with Roth connection 401975.8xx