Komponenten für Schaltkästen und Schränke - Seite 46

iC60N - Leitungsschutzschalter - 1P - 0,5A - C-Kurve

iC60N - Mini-Leitungsschutzschalter - 1P - 6A - B-Kurve

Acti9 iPB 1NO single push button grey

Schalt-Lasttrennschalter Compact INS250 - 250 A - 4 Pole

Lock case for automatic fuse PSL-CB from PANDUIT GmbH

Zubehör für den Schalter

Überstromschalter, 10A, 3polig+N, Typ C Charakteristik

PFI relay 63A 3P+N 30mA Type B

PFI-Relais 40A 3P+N 30mA Typ B

Relay 16A 1NO+1NC 12VFor control of circuitsA control device with 3 positions on the frontRated operating voltage AC: 230V AC control voltage: 12Frequency: 50/60Hz Operating temperature: -10 to 50 ° C Connection cross-section with flexible conductor: 1 - 6mm 2 Cross-sectional area for rigid conductors: 1 - 10mm 2 A lifetime mechanical operations: 1000000 Equipment life, electrical operations: 30000 Total power loss at rated power: 1.6 W Number of modules: 1

Latching relay 2NO 8V1 moduleRated operational voltage: 250VType of contacts: 2NOScrew connectionFrequency: 50/60Hz

TeSys GV2-Sicherungsautomat-thermisch-magnetisch - 1,6...2,5 A - Schraubklemmen

TeSys GV2 - Leitungsschutzschalter - thermomagnetisch - 6...10 A - Schraubklemmen

Zylindrische Sicherung gg nach französischem Standard (NFC) ohne Anzeige Größe 10x38mm, 500V 16A

Auto wechselt zwischen Sommer- und Winterzeit, 2 Umschaltkontakte, dänisches Menü, 2 Module für DIN-Schiene M36

Erdermodul - 40 A - für V02...V2

AF26 contactors are used for controlling power circuits up to 690 V AC and 220 V DC. They are mainly used for controlling 3-phase motors, non-inductive or slightly inductive loads. AF... contactors include an electronic coil interface accepting a wide control voltage Uc min. ... Uc max. Only four coils cover control voltages between 24...500 V 50/60 Hz or 20...500 V DC. AF contactors can manage large control voltage variations. One coil can be used for different control voltages used worldwide without any coil change. AF contactors have built-in surge protection and do not require additional surge suppressors. The AF... series 1-stack 3-pole contactors are of the block type design. - Main poles and auxiliary contact blocks: 3 main poles, front and side-mounted add-on auxiliary contact blocks (mechanically-linked auxiliary contacts compliant with Annex L of IEC 60947-5-1. N.C. mirror contacts compliant with Annex F of IEC 60947-4-1) - Control circuit: AC or DC operated - Accessories: a wide range of accessories is available.

AF16Z contactors are used for controlling power circuits up to 690 V AC and 220 V DC. They are mainly used for controlling 3-phase motors, non-inductive or slightly inductive loads. AF..Z contactors include an electronic coil interface accepting a wide control voltage Uc min. ... Uc max. Only four coils cover control voltages between 24...250 V 50/60 Hz or 12...250 V DC. AF..Z contactors can manage large control voltage variations. One coil can be used for different control voltages used worldwide without any coil change. AF..Z contactors allow direct control by PLC-output 24 V DC 500 mA and obtain a reduced holding coil consumption. AF..Z contactors withstand short voltage dips and voltage sags (SEMI F47-0706 compliance) between 24...250 V 50/60 Hz AF..Z contactors have built-in surge protection and do not require additional surge suppressors The AF... series 1-stack 3-pole contactors are of the block type design. - Main poles and auxiliary contact blocks: 3 main poles, 1 built-in auxiliary contact, front and side-mounted add-on auxiliary contact blocks. (mechanically-linked auxiliary contacts compliant with Annex L of IEC 60947-5-1. N.C. mirror contacts compliant with Annex F of IEC 60947-4-1) - Control circuit: AC or DC operated - Accessories: a wide range of accessories is available.

Contactor 25A 1NO+1NC 230V Standard for the control of circuitsCan be equipped with auxiliary contact and sealig capsRated operational voltage: 230 V Frequency: 50/60Hz Type of connection: With screw Operating temperature: -10 to 50 ° C Storage temperature: -40 to 80 ° C Connection cross-sect rigid cable: 1 / 10mm2 Connection cross-sect. flexible cable: 1 / 6mm2 To reduce the mutual heating when using several contactorsit is recommended to use the LZ060 spacerNumber of modules: 1According to standard: EN 61095

Contactor 25A 4NC 230V Standard for the control of circuitsCan be equipped with auxiliary contact and sealig capsRated operational voltage: 400 V Frequency: 50/60Hz Type of connection: With screw Operating temperature: -10 to 50 ° C Storage temperature: -40 to 80 ° C Connection cross-sect rigid cable: 1 / 10mm2 Connection cross-sect. flexible cable: 1 / 6mm2 To reduce the mutual heating when using several contactorsit is recommended to use the LZ060 spacerNumber of modules: 2According to standard: EN 61095

3 Stecker - 6 Kabel - 1,5..35 mm2

iC60N - miniature circuit breaker - 3P + N - 6A - C curve

Block Contactor Accessories

[7825200127]

TeSys D Thermische Überlastrelais - 23...32 A - Klasse 10A