Komponenten für Schaltkästen und Schränke - Seite 44

Schneider Electric ABLS1A24031 Versorgungsnetztransformator

3 phase Kilowatt-hour meter for DIN rail mounting. measuring in 4 quadrants, multiple tariffs with counter and M-bus communications, digital I / O and MID certified.This model provides a direct measurement of I, D, P, Q, S, and E up to 63A. without CTs or

TeSys LE - Gehäuse für DOL-Starter - mit 2 Druckknöpfen

TeSys GV2 & GV3 - Hilfskontaktblock - 1 Öffner + 1 Schließer

iC60N - Mini-Leitungsschutzschalter - 2-polig - 6A - D-Kurve

comb busbar - Easy to cut - Acti 9 balanced 4 Poles 57 modules 100A

iRTC relay - delays de energizing a load upon opening 1O/C - Uc 24 -240 VAC/ 24 VDC

TeSys GV2-Sicherungsautomat-thermisch-magnetisch - 0,63...1 A - Schraubklemmen

shaft extension - Mini-VARIO and VARIO - for V3 / V4 / V5 / V6

Schneider Electric A9F94210 Stromunterbrecher 2

Schalter Acti9 iSW - 1-polig - 20 A - 250V

The Siemens 3-pole circuit breaker 5SY6340-7 offers reliable protection with a breaking capacity of 6kA according to EN 60898. With C characteristics and a rated current of 40A, it is ideal for industrial applications. It is easy to mount on a DIN rail and has an IP20 protection class. The fuse supports both single-phase and three-phase installations and is designed to handle current loads up to 400V AC.

Reguliertes SMPS, 1 oder 2 Phasen - 100..240 V AC - 24 V 20A

The Zelio RE22 range brings to market 2 new key improvements.- The backlight LED dials for adjustment makes it easy to use in any condition, even in dusty or poorly lit enviroments. - The built-in testbutton simplifies commissioning and troubleshooting by

Vigi iC60 - earth leakage add-on block - 2P - 25A - 30mA - A type

This Resi9 product is a low voltage miniature circuit-breaker (MCB). It is a 3P+N circuit breaker with 3 protected pole and 13A In rated current and C tripping curve. The Icn rated short-circuit breaking capacity is up to 6000A at 400VAC with operating frequency of 50Hz to 60Hz conforming to EN/IEC 60898-1 standard. This miniature circuit-breaker protects circuit against short-circuit and overload current. This product complies with EN/IEC 60898-1 standard. The electrical endurance is up to 7500 cycles and the mechanical endurance is up to 20000 cycles. The Resi9 is targeted to residential for individual and collective buildings. This circuit-breaker has an ON/OFF indication for local signalling with toggle control. It has a tunnel type terminals connection at top or bottom. The connection allows rigid copper cables. The cable cross section capacity is from 1mm2 to 16mm2. The connection allows flexible copper cables. The cable cross section capacity is from 1mm2 to 10mm2. The connection allows flexible with ferrule copper cables. The cable cross section capacity is from 1mm2 to 10mm2. The Ue rated operational voltage is up to 400VAC with operating frequency of 50Hz to 60Hz. The Ui rated insulation voltage is up to 440VAC. The Uimp rated impulse withstand voltage is 4kV. The overvoltage category is 3. It can be mounted on DIN rail for modular installation. The width in 9mm pitch is 6. The dimensions are (W) 54mm x (H) 81mm x (D) 73.5mm. The product colour is white (RAL 9003). The product weight is 320g. The pollution degree is 2 conforming to EN/IEC 60898-1 standard. The relative humidity is 95% at 55°C. The level of tropicalisation is 2 conforming to IEC 60068-1 standard. The limitation class is 3 conforming to EN/IEC 60898-1 standard. The wire stripping length is 13mm (top or bottom). The tightening torque of connection is 2N.m (top or bottom) for PZ2 screwdriver type. According to IEC 60529 standard, the IP degree of protection is IP20 and becomes IP40 once in mod

This Resi9 product is a modular residual current breaker with overcurrent protection (RCBO). It is a 1P+N circuit breaker with 1 protected pole and 13A In rated current and C tripping curve. The earth leakage protection class is A type with a sensitivity of 30mA. The earth-leakage protection time delay is instantaneous. The rated short-circuit breaking capacity is up to 6000A conforming to EN/IEC 61009-2-1 standard. This product protects against short-circuit, cable overload, electrical shock by indirect contact and fire hazards. It brings safety, reliable solution for commercial and industrial applications with high breaking capacity. This product complies with EN/IEC 61009-2-1 and EN/IEC 61009-1 standards. The electrical endurance is up to 7500 cycles and the mechanical endurance is up to 20000 cycles. This circuit-breaker has a position contact indicator, and also has a ON/OFF indication for local signalling with toggle control. It has a tunnel type terminals connection at top or bottom. The connection allows rigid copper cables. The cable cross section capacity is from 1mm2 to 16mm2. The connection allows flexible copper cables. The cable cross section capacity is from 1mm2 to 10mm2. The connection allows flexible with ferrule copper cables. The cable cross section capacity is from 1mm2 to 10mm2. The Ue rated operational voltage is up to 230VAC with operating frequency of 50Hz. The Ui rated insulation voltage is up to 400V. The Uimp rated impulse withstand voltage is 4kV. The overvoltage category is 3. It can be mounted on DIN rail for modular installation. The width in 9mm pitch is 4. The dimensions are (W) 36mm x (H) 82mm x (D) 70.5mm. The product colour is white (RAL 9003). The product weight is 186g. The pollution degree is 2. The tightening torque of connection is 2N.m (top or bottom) for PZ2 screwdriver type. The wire stripping length is 13mm (top or bottom). According to IEC 60529 standard, the IP degree of protection is IP20 and becomes IP40 once in modu

Impulsrelais

Auto wechselt zwischen Sommer- und Winterzeit, 1 Umschaltkontakt, dänisches Menü, 2 Module für DIN-Schiene M36

Acti9 IC60 RCBO 2P 10A 300mA C 10kA A. For protection of end circuit, and protection of people against electric shock at direct contact ( 30 mA). As well as earth leakage at front plate.

Earthing-Modul - 80 A - für V3 / V4

Zelio RUM relays are available with either 2 or 3 changeover contacts capable up to 10A each. Depending of model, RUM is available with up to 10 different supply voltages which will cover your every need.Zelio RUM relays is available for 2 different socke

TeSys K Umkehrschütz - 3P(3 NO) - AC-3 - <= 440 V 9 A - Spule mit 230 V AC

TeSys K Schütz - 3P(3 Ö) - AC-3 - <= 440 V 9 A - Spule mit 24 V Gleichstrom

Humfree contactor 25A 2NO 230V Humfree for the control of circuitsGuarenteed silence during the entire life of the productCan be equipped with auxiliary contact and sealig capsRated operational voltage: 230 V Frequency: 50/60Hz Type of connection: With screw Operating temperature: -10 to 50 ° C Storage temperature: -40 to 80 ° C Connection cross-sect rigid cable: 1 / 10mm2 Connection cross-sect. flexible cable: 1 / 6mm2 To reduce the mutual heating when using several contactorsit is recommended to use the LZ060 spacerNumber of modules: 1According to standard: EN 61095