Schneider Electric Komponenten für Schaltkästen und Schränke - Seite 9

Schneider Electric RSL1AB4BD Leistungsrelais Schwarz

3 phase Kilowatt-hour meter for DIN rail mounting. measuring in 4 quadrants, multiple tariffs with counter and Modbus communications, digital I / O and MID certified.This model provides a direct measurement of I, D, P, Q, S, and E up to 63A. without CTs o

4 Stecker - Kabel - 120..185 mm2

Schneider Electric Resi9 MCB Stromunterbrecher 3P + N

It is an extended rotary handle for ComPacT NSX 100/160/250, PowerPact Multistandard H/J frames and EasyPact CVS 100/160/250 devices. It is suitable for isolation and it is used for standard applications. It maintains the access to trip unit settings and to the push to trip button. It is equipped with a standard black handle. There is an indication of the three device positions O (OFF), I (ON) and tripped. This extended version makes possible to operate devices installed at back of switchboards, from the switchboard front. The distance between the back of the circuit breaker and the switchboard door is from 185mm to 600mm. The degrees of protection are IP55 and IK08. This rotary handle is padlockable in the OFF position using 1 to 3 padlocks not supplied (shackle diameter 5 to 8mm). As an option, it is possible to install a Ronis or Profalux keylock on the base of the handle to obtain the same function as with a padlock.

C60SP are multi-standard miniature circuit breakers and supplementary protectionas defined by UL 1077. It combines following functions:bbcircuit protection against short-circuit currentsbbcircuit protection against overload currentsbb tripping and fault i

Schneider Electric GV2G

Schneider Electric LC1D40AB7 Hilfskontakt

Dette Acti9 elektriske hjælpeudstyr er en modulær OC-kontakt, der bruges som fjernindikation af positionen af den tilknyttede enhed Den nominelle strøm (In) er fra 100mA til 6A med en driftsfrekvens på 50Hz til 60Hz ved 24VAC til 415VAC og fra 100mA til 6A ved 24VDC til 130VDC. Den har 1 positionskontakt med kontakter type 1 C/O. Den er beregnet til ny eller renoveret installation i små erhverv, bygninger, kritiske bygninger, sundhedspleje, industri, datacenter og infrastrukturer. Denne OC-kontakt er kompatibel med Acti9-serier såsom iC60 dobbeltterminaler og iID dobbeltterminaler. iOF bruges enten til enhedens korte navn eller kompatibilitetskode. Den har en skrueklemmetilslutning øverst. Tilslutningen tillader stift kobberkabel. Kabeltværsnitskapaciteten er fra 1 mm2 til 4 mm2. Den har en skrueklemmetilslutning øverst. Tilslutningen tillader fleksibelt kobberkabel. Kabeltværsnitskapaciteten er fra 0,5 mm2 til 2,5 mm2. Den har en skrueklemmetilslutning øverst. Tilslutningen tillader stive kobberkabler (2 kabler). Kabeltværsnitskapaciteten er 2,5 mm2. Den har en skrueklemmetilslutning øverst. Tilslutningen tillader fleksibel med ferrule kobberkabler (2 kabler). Kapaciteten af kabeltværsnittet er 1,5 mm2. Den nominelle isolationsspænding (Ui) er op til 500V. Den har en nominel impulsmodstandsspænding (Uimp) på 4kV. Målene er (B) 9mm x (H) 86mm x (D) 73mm. Produktets farve er hvid (RAL 9003). Forureningsgraden er 3. Tropicaliseringsniveauet er behandling 2. Tilslutningsmomentet er 1N. (nederst) for PZ1 skruetrækker type. I henhold til IEC 60529-standarden er IP-beskyttelsesgraden IP20. Driftstemperaturen er fra -25°C til +70°C. Opbevaringstemperaturen er fra -40°C til +85°C.

This MicroLogic 2.3 is a 3 poles 3d electronic trip unit used on ComPacT NSX 400/630 circuit breakers. This 400A rating electronic trip unit is an optimum choice for all standard and specific applications. It embeds an adjustable long time protection against overloads. It provides also an adjustable short-time protection and a fixed instantaneous protection against short-circuits. MicroLogic 2.3 indicates overloads with Alarm LEDs. The green Ready LED flashes if the circuit breaker is ready to trip. This product is part of our EcoStruxure Power architecture if associated with PowerTag NSX and ComPacT NSX basic frame.

TeSys GV2 - Leitungsschutzschalter - thermomagnetisch - 1...1,6 A - Schraubklemmen

Türverriegelung - Set von 5

Schneider Electric LC1D50AP7 Hilfskontakt

Schneider Electric A9F04113 Stromunterbrecher 1

This is a 4 poles basic frame for ComPacT NSX250F. ComPacT NSX is designed to optimize space and breaking capacity for all standard and specific applications. This basic frame comes without trip unit, and is compatible with any type of trip unit which has to be ordered separately The breaking capacity Icu is 36kA at 415VAC 50/60Hz. The operational voltage is 690VAC 50/60Hz (limited to 440VAC 50/60Hz if there is an earth-leakage protection). It can be equipped with a variety of optional functions and accessories. The dimensions are 140mm x 161mm x 86mm. It ensures compliance with international standards (IEC 60947), CCC, EAC and marine specifications. ComPacT NSX250F is part of Schneider Electric EcoStruxure Power architecture.

This Acti9 iTL is Schneider Electric's modular and reliable impulse relay. It has 2 normally open contacts, is rated 16 amperes and operates with 230 - 240VAC or 110VDC impulse control signal. This product benefits from Schneider Electric expertise with more than 40 years developing modular devices for all type of applications. It has a longer service life thanks to its high limitation and fast closing. This product is compliant with IEC 669-1, IEC 669-2-2, IEC 60529, has IP20 on opening, IP40 in an enclosure and is DIN rail mountable. Ideal for lighting control applications, for example control of a light with more than 3 switches in a living room or a corridor. . Ideal for lighting control applications, for example control of a light with more than 3 switches in a living room or a corridor. High rated current capability in a small package: control many lighting circuits without increasing the size of your panel. Up to 200000 cycles endurance: even with 100 switching cycles per day, the contactor will last more than 5 years. Can switch even with very short 50 ms impulses: your lighting circuit will switch on, no matter how briefly the user pushes the light button.

Schneider Electric LC1D115P7 Hilfskontakt

Schneider Electric TeSys GV2 Stromunterbrecher 3

TeSys K Schütz - 3P(3 Ö) - AC-3 - <= 440 V 12 A - Spule mit 24 V AC

iC60N - miniature circuit breaker - 4P - 32A - D curve

Acti9 IC60 RCBO 4P 10A 30mA C 6kA A. For protection of end circuit, and protection of people against electric shock at direct contact ( 30 mA). As well as earth leakage at front plate.

4 Stecker - 2 Kabel 35..240 mm2

This Acti9 electrical auxiliary is a modular OC and fault contact. The 2 contacts (2 NO/NC) can report the signalling information of the associated device to a programmable logic controller. The rated current (In) is from 2mA to 100mA with operating frequency of 50Hz to 60Hz at 24VAC to 240VAC, and from 2mA to 100mA at 24VDC to 220VDC. It has 2 position switches with contacts type 2 C/O. It is intended for new or renovated installation in small commercial, buildings, critical buildings, healthcare, industry, data center and infrastructures. This OC and fault contact is compatible with Acti9 ranges such as iC60, iID, iDPN ARC, iDPN Vigi, iDPN Vigi ARC, iSW, iC60 and iID double terminals residual current circuit breaker (RCCB). The OC and fault contact is installed for only Acti9 ranges such as iID, iDPN Vigi, iSW-NA, ARA, iC60 and RCA devices which includes 2 changeover contacts. If there is no comb busbar, it is also compatible with iC40, iC40 ARC, iCV40, iCV40 Vigi ARC. The iSD+OF is either used for device short name or compatibility code. The mechanical indicator is provided on the product for signalling (Local). It has a screw clamp terminal connection at top and bottom. The connection allows rigid copper cable. The cable cross section capacity is from 1mm2 to 4mm2. It has a screw clamp terminal connection at top and bottom. The connection allows flexible copper cable. The cable cross section capacity is from 0.5mm2 to 2.5mm2. It has a screw clamp terminal connection at top and bottom. The connection allows rigid copper cables (2 cables). The cable cross section capacity is 2.5mm2. It has a screw clamp terminal connection at top and bottom. The connection allows flexible with ferrule copper cables (2 cables). The cable cross section capacity is 1.5mm2. The rated insulation voltage (Ui) is up to 500V. It has a rated impulse withstand voltage (Uimp) of 4kV. The width in 9mm pitches is 1. The dimensions are (W) 9mm x (H) 90mm x (D) 73mm. The product colour is white

Schneider Electric R9P19616 Stromunterbrecher 1P + N

Schneider Electric ABLM1A24025 Versorgungsnetztransformator