Schneider Electric Komponenten für Schaltkästen und Schränke - Seite 31

This Resi9 product is a low voltage miniature circuit-breaker (MCB). It is a 3P+N circuit breaker with 3 protected pole and 13A In rated current and C tripping curve. The Icn rated short-circuit breaking capacity is up to 6000A at 400VAC with operating frequency of 50Hz to 60Hz conforming to EN/IEC 60898-1 standard. This miniature circuit-breaker protects circuit against short-circuit and overload current. This product complies with EN/IEC 60898-1 standard. The electrical endurance is up to 7500 cycles and the mechanical endurance is up to 20000 cycles. The Resi9 is targeted to residential for individual and collective buildings. This circuit-breaker has an ON/OFF indication for local signalling with toggle control. It has a tunnel type terminals connection at top or bottom. The connection allows rigid copper cables. The cable cross section capacity is from 1mm2 to 16mm2. The connection allows flexible copper cables. The cable cross section capacity is from 1mm2 to 10mm2. The connection allows flexible with ferrule copper cables. The cable cross section capacity is from 1mm2 to 10mm2. The Ue rated operational voltage is up to 400VAC with operating frequency of 50Hz to 60Hz. The Ui rated insulation voltage is up to 440VAC. The Uimp rated impulse withstand voltage is 4kV. The overvoltage category is 3. It can be mounted on DIN rail for modular installation. The width in 9mm pitch is 6. The dimensions are (W) 54mm x (H) 81mm x (D) 73.5mm. The product colour is white (RAL 9003). The product weight is 320g. The pollution degree is 2 conforming to EN/IEC 60898-1 standard. The relative humidity is 95% at 55°C. The level of tropicalisation is 2 conforming to IEC 60068-1 standard. The limitation class is 3 conforming to EN/IEC 60898-1 standard. The wire stripping length is 13mm (top or bottom). The tightening torque of connection is 2N.m (top or bottom) for PZ2 screwdriver type. According to IEC 60529 standard, the IP degree of protection is IP20 and becomes IP40 once in mod

This Resi9 product is a modular residual current breaker with overcurrent protection (RCBO). It is a 1P+N circuit breaker with 1 protected pole and 13A In rated current and C tripping curve. The earth leakage protection class is A type with a sensitivity of 30mA. The earth-leakage protection time delay is instantaneous. The rated short-circuit breaking capacity is up to 6000A conforming to EN/IEC 61009-2-1 standard. This product protects against short-circuit, cable overload, electrical shock by indirect contact and fire hazards. It brings safety, reliable solution for commercial and industrial applications with high breaking capacity. This product complies with EN/IEC 61009-2-1 and EN/IEC 61009-1 standards. The electrical endurance is up to 7500 cycles and the mechanical endurance is up to 20000 cycles. This circuit-breaker has a position contact indicator, and also has a ON/OFF indication for local signalling with toggle control. It has a tunnel type terminals connection at top or bottom. The connection allows rigid copper cables. The cable cross section capacity is from 1mm2 to 16mm2. The connection allows flexible copper cables. The cable cross section capacity is from 1mm2 to 10mm2. The connection allows flexible with ferrule copper cables. The cable cross section capacity is from 1mm2 to 10mm2. The Ue rated operational voltage is up to 230VAC with operating frequency of 50Hz. The Ui rated insulation voltage is up to 400V. The Uimp rated impulse withstand voltage is 4kV. The overvoltage category is 3. It can be mounted on DIN rail for modular installation. The width in 9mm pitch is 4. The dimensions are (W) 36mm x (H) 82mm x (D) 70.5mm. The product colour is white (RAL 9003). The product weight is 186g. The pollution degree is 2. The tightening torque of connection is 2N.m (top or bottom) for PZ2 screwdriver type. The wire stripping length is 13mm (top or bottom). According to IEC 60529 standard, the IP degree of protection is IP20 and becomes IP40 once in modu

The Zelio Solid State Relays are available for all kinds of interfacing and control and load switching, particularly for heating, motion, and lighting control applications.The relays have been divided into three key ranges based on form factor and features for applications:Zelio SSL solid state relays are slim, with a DIN-rail mountable SSLZ socket (6 mm wide). They are ideal for panels where space is at a premium.Zelio SSM solid state relays are ready to use, modular, and DIN-rail mountable. They are compact and include an integrated heatsink. Available in single and three-phase options up to 55 A and 25 A, respectively. Zelio SSP panel mount solid state relays include a full range of heatsinks and accessories to meet the needs of all kinds of applications. Available with single and three-phase options up to 125 A and 50 A, respectively.Together, these three ranges comprise a comprehensive offer featuring solid state technology, allowing fast and high-frequency switching, precision machine control, and a practically unlimited lifespan. This makes Zelio solid state relays a best-in-class choice for applications in packaging, plastic & rubber, textiles, and food & beverage. All of the new Zelio relays are Green PremiumTM products with certification and compliance of industrial standards, e.g. UL, CSA, EAC. Green Premium is a Schneider Electric ecolabel that guarantees environmental friendliness without compromising on performance.

Schneider Electric A9F07216. Eingangsstrom: 16 A. Internationale Schutzart (IP-Code): IP20. Breite: 36 mm, Tiefe: 78,5 mm, Höhe: 91 mm

Residual current module 3P + N, 40A, 30mA, Class A. A fault current Vigi iC40 module is an add-on module for Acti9 iC40 type of circuit breakers. The result is optimum protection of humans, installations and electrical devices against over-currents, fault, an electric shock by direct and indirect contact, transients and fire hazard. This Vigi iC40 fault current module is 3 pole, marked to 40A, 400V and has a sensitivity of 30mA. The unit has test button on the front and is equipped with Schneider Electric's patented VisiTrip TM technology, which ensures rapid troubleshooting with clearly marked on the front. The module is 90 mm wide and easy mounting of clips on a DIN rail with automatic fuse.

Rotary-Griff vorne KCF - für VN-12, VN-20, V02...V2 - roter Griff

This Acti9 iCT is a modular and reliable contactor. It is a 1P remote control device with 1 normally open contact. Rated current is 25A for AC-7a and 8.5A for AC-7b. Operating voltage is 250VAC and a control voltage is 230VAC to 240VAC. Electrical endurance goes up to 100000 cycles for AC-7A or AC-1, 30000 cycles for AC-7C, AC-7B, AC-3, AC-5A or AC-5B. The maximum switching operations is 100 per day. The degree of protection is IP20 and IP40 in an enclosure. It is DIN rail mountable. This device could be used for remote switching small motors (fans, mixers) or HVAC system applications. It is compatible with all the Acti9 control auxiliaries, for heating & ventilation control applications. This product is compliant with IEC/EN 61095.

iID - earth leakage protection - 4P - 40A - 300mA - A type

Vigi iC60 - earth leakage add-on block - 2P - 25A - 30mA - A type

This Acti9 iC60N is a low voltage miniature circuit breaker (MCB). It is a 2P circuit-breaker with 2 protected poles, 2A rated current and C tripping curve. It can be mounted on DIN rail for modular installation. As circuit-breaker, its breaking capacity, according to IEC/EN 60898-1, is 6000A at 400VAC. As circuit-breaker, its breaking capacity, according to IEC/EN 60947-2, is 50kA at 230VAC and 50kA at 400VAC. This miniature circuit breaker protects circuits against short circuit and overload currents. It has an IP20 degree of protection (as per IEC/EN 60529) on its terminals. It becomes IP40 once in modular enclosure with insulation class II. its fast closing mechanism improves its service life. Its limitation class 3 (according to EN/IEC60898-1) improves downstream circuit protection cost. Its unique Visitrip indicator reduces intervention time by showing the faulty circuit. Its Visisafe green strip guarantees the physical opening of the contacts to allow downstream maintenance.

iC60N - Mini-Leitungsschutzschalter - 3P + N - 16A - B-Kurve

Schneider Electric TeSys GV2. Internationale Schutzart (IP-Code): IP20, Produktfarbe: Schwarz, Weiß, Zertifizierung: EN 60204 IEC 60947-1 IEC 60947-2 IEC 60947-4-1 NF C 63-120 NF C 63-650 NF C 79-130 UL 508 VDE 0113.... Breite: 45 mm, Tiefe: 78,2 mm, Höhe: 89 mm• Anzahl der Pole: 3• IP20• Schwarz, Weiß

Schneider Electric A9C20736. Produktfarbe: Mehrfarbig, AC-Kontaktbewertung: 240 AC

Schneider Electric LC1D50ABD. Produktfarbe: Mehrfarbig, DC-Kontaktbewertung: 24 DC

motor-mechanism - MT400/630 - 208..277 V 60Hz / 220..240 V 50/60Hz

This is a 3 poles basic frame for ComPacT NSX160B. ComPacT NSX is designed to optimize space and breaking capacity for all standard and specific applications. This basic frame comes without trip unit, and is compatible with any type of trip unit which has to be ordered separately The breaking capacity Icu is 25kA at 415VAC 50/60Hz. The operational voltage is 690VAC 50/60Hz (limited to 440VAC 50/60Hz if there is an earth-leakage protection). It can be equipped with a variety of optional functions and accessories. The dimensions are 105mm x 161mm x 86mm. It ensures compliance with international standards (IEC 60947), CCC, EAC and marine specifications. ComPacT NSX160B is part of Schneider Electric EcoStruxure Power architecture.

TeSys D - Kontaktor-Spule - LXD1 - 48 V AC 50/60 Hz für Kontakte von 9...38 A

iC60N - Miniatur-Leitungsschutzschalter - 2-polig - 13A - C-Kurve

Schneider Electric LC1DT20BD. Produktfarbe: Mehrfarbig, DC-Kontaktbewertung: 24 DC

Schneider Electric GV2G. Nennisolierspannung: 690 V. Gewicht: 58 g, Paketgewicht: 58 g, Verpackungstiefe: 35 mm