Schneider Electric Komponenten für Schaltkästen und Schränke - Seite 2

Schneider Electric Resi9 MCB Stromunterbrecher 3P + N

This Acti9 iCT is a modular and reliable contactor. It is a 1P remote control device with 1 normally open contact. Rated current is 25A for AC-7a and 8.5A for AC-7b. Operating voltage is 250VAC and a control voltage is 230VAC to 240VAC. Electrical endurance goes up to 100000 cycles for AC-7A or AC-1, 30000 cycles for AC-7C, AC-7B, AC-3, AC-5A or AC-5B. The maximum switching operations is 100 per day. The degree of protection is IP20 and IP40 in an enclosure. It is DIN rail mountable. This device could be used for remote switching small motors (fans, mixers) or HVAC system applications. It is compatible with all the Acti9 control auxiliaries, for heating & ventilation control applications. This product is compliant with IEC/EN 61095.

Schneider Electric A9A15215 Türklingel-Tranformator

Schneider Electric iID Stromunterbrecher 2P

Schneider Electric iID Stromunterbrecher 4P

Schneider Electric A9Z51440 Nicht kategorisiert

Acti9 iID B-SI type fault RCCB provides:- protection in case of a continuous earth fault current on the networkgenerated by:- div controllers and frequency converters,battery chargers and converters used in ex PV photovoltaic applicationsas well as back-u

iID - Fehlerstromschutzschalter - 4-polig - 63A - 30mA - SI-Typ

iC60N - Leitungsschutzschalter - 3P - 40A - C-Kurve

Schneider Electric A9C20132 Hilfskontakt

iID - earth leakage protection - 4P - 40A - 300mA - A type

Schneider Electric iID Stromunterbrecher 4P

Schneider Electric LAD8N11 Hilfskontakt

Schneider Electric Acti9 iCV40 Stromunterbrecher 1P + N

TeSys GV2 & GV3 - auxiliary contact - 1 NO + 1 NC

This Acti9 iC60H is a low voltage miniature circuit breaker (MCB). It is a 3P circuit-breaker with 3 protected poles, 32A rated current and C tripping curve. It can be mounted on DIN rail for modular installation. As circuit-breaker, its breaking capacity, according to IEC/EN 60898-1, is 10000A at 400VAC. As circuit-breaker, its breaking capacity, according to IEC/EN 60947-2, is 30kA at 230VAC and 15kA at 400VAC. This miniature circuit breaker protects circuits against short circuit and overload currents. It has an IP20 degree of protection (as per IEC/EN 60529) on its terminals. It becomes IP40 once in modular enclosure with insulation class II. its fast closing mechanism improves its service life. Its limitation class 3 (according to EN/IEC60898-1) improves downstream circuit protection cost. Its unique Visitrip indicator reduces intervention time by showing the faulty circuit. Its Visisafe green strip guarantees the physical opening of the contacts to allow downstream maintenance. This double terminal miniature circuit breaker reflects Schneider Electric expertise with more than 40 years developing modular devices for the protection of electrical circuits in all applications. It has a longer service life thanks to its high limitation and fast closing. This product is compliant with both IEC 60898-1 and IEC 60947-2, has IP20B finger proof terminals with double the tightening torque versus the standard and is DIN rail mountable. It offers VisiTripTM for safety during maintenance and VisiSafeTM to reduce intervention time.

Residual current fault current protective device RCD 3P + N, 40A, 400V, 30mA, Class A with N-terminal at the right side. Multi 9 residual current RCD (RCCB) protects people against electric shock by direct and indirect contact. In addition they protect installations against fire caused by the transition of the electric installations. This class A residual current circuit breaker is 3P + N pole, marked to 40A at 400V and has a sensitivity of 30 mA. The unit is equipped with test button on the front, 72 mm wide and suitable for mounting on DIN rail.

early-break/late-make auxiliary contact block - VARIO - 1 NO + 1 NC

TeSys GV2 - Leistungsschalter - thermomagnetisch - 9...14 A - Schraubklemmen

Schneider Electric A9Z64463 Stromunterbrecher Fehlerstromschutzschalter Typ B-SI 4

Acti9 IC60 RCBO 4P 32A 300mA C 6kA A. For protection of end circuit, and protection of people against electric shock at direct contact ( 30 mA). As well as earth leakage at front plate.

Schneider Electric iC60 RCBO Stromunterbrecher 4P

This Resi9 is a modular residual current breaker with overcurrent protection (RCBO). It is a 1P+N circuit breaker with 1 protected pole and 10A In rated current and C tripping curve. The earth leakage protection class is A type with a sensitivity of 30mA. The earth-leakage protection time delay is instantaneous. The Icn rated short circuit breaking capacity is up to 6000A according EN/IEC 61009-2-1 standard. This product protects against short circuit, cable overload, electrical shock by indirect contact and fire hazards. It brings safety, reliable solution for commercial and industrial applications with high breaking capacity. This product is compliant with EN/IEC 61009-2-1 standard. It has an electrical endurance going up to 7500 cycles and a mechanical endurance going up to 20000 cycles. The Ue operational voltage is 230VAC. It is DIN rail mountable. The width in 9mm pitches is 4. The product color is white (RAL9003). The dimensions are (W) 36mm x (H) 82mm x (D) 70.5mm. The weight is 186g. It has an IP20 degree of protection (as per IEC/EN 60529 standard) and becomes IP40 once in modular enclosure. The operating temperature is from -25°C to -60°C.

This Acti9 iC60N is a low voltage miniature circuit breaker (MCB). It is a 2P circuit-breaker with 2 protected poles, 6A rated current and C tripping curve. It can be mounted on DIN rail for modular installation. As circuit-breaker, its breaking capacity, according to IEC/EN 60898-1, is 6000A at 400VAC. As circuit-breaker, its breaking capacity, according to IEC/EN 60947-2, is 20kA at 230VAC and 10kA at 400VAC. This miniature circuit breaker protects circuits against short circuit and overload currents. It has an IP20 degree of protection (as per IEC/EN 60529) on its terminals. It becomes IP40 once in modular enclosure with insulation class II. its fast closing mechanism improves its service life. Its limitation class 3 (according to EN/IEC60898-1) improves downstream circuit protection cost. Its unique Visitrip indicator reduces intervention time by showing the faulty circuit. Its Visisafe green strip guarantees the physical opening of the contacts to allow downstream maintenance. This double terminal miniature circuit breaker reflects Schneider Electric expertise with more than 40 years developing modular devices for the protection of electrical circuits in all applications. It has a longer service life thanks to its high limitation and fast closing. This product is compliant with both IEC 60898-1 and IEC 60947-2, has IP20B finger proof terminals with double the tightening torque versus the standard and is DIN rail mountable. It offers VisiTripTM for safety during maintenance and VisiSafeTM to reduce intervention time.

This Resi9 product is a switch disconnector. It is a 4 poles switch disconnector with 40A rated current at 415VAC. This switch disconnector is used for control (opening and closing of circuits under load). This product is also used for disconnection of on-load electrical circuits already protected against overload and short-circuits. Electrical endurance goes up to 10000 cycles . Mechanical endurance goes up to 50000 cycles . The Ui rated insulation voltage is 500 VAC. It has a Uimp rated impulse withstand voltage of 6kV. The operating frequency is 50Hz or 60Hz. It can be mounted on a DIN rail for modular installation. Its width is 8 pitches of 9mm. The dimensions are (W) 72mm x (H) 81mm x (D) 70.5mm . The product weight is 309g. The color is white (RAL9003). According to IEC 60529 standard, the degree of protection is IP20 or IP40 in modular enclosure. The operating temperature is -25°C to 60°C. The storage temperature is -40°C to 85°C. This product complies with EN/IEC 60669-2-4 standard.