Danfoss Fußbodenheizung

Danfoss Icon2™ Main Controller for underfloor heating control. Basic model, 230V, 15 circuits. Installation, adjustment and handover take place easily with the Danfoss Icon2™ Commissioning App.

Danfoss Icon2™ TWA Conversion module for converting 230V actuator output to 24V actuator output.

Danfoss 088U2121 Thermostat ZigBee Weiß

Danfoss Zigbee Repeater, 230V/wireless. Wird als Netzwerkverstärker zwischen dem Zigbee-Gateway und drahtlosen Geräten verwendet. Kompatibel mit Danfoss AllyTM, Danfoss IconTM und Zigbee 3.0-Systemen von Drittanbietern.

Danfoss 088U2120 Thermostat ZigBee Weiß

Danfoss Icon Master Controller 24V with 10 channels. Underfloor heating control for the Danfoss Icon series with 10 outputs for thermal actuators. Up to 10 room thermostats, wireless/wired, can be registered. The Master Controller must be combined with the Danfoss Icon radio module if wireless room thermostats are to be registered. Automatic balancing, active pump relay, function test and potential-free boiler relay are standard. It is possible to purchase the Danfoss Icon app-module which provides access to app-control of the underfloor heating system via an iOS or Android device. The app-module also provides access to online updating of the Master Controller firmware (OTA). Cooling control and demand-controlled flow temperature can be purchased using the Danfoss Icon expansion module. The Master Controller is compatible with Zigbee 3.0 systems such as Danfoss Ally or 3rd party Zigbee systems. For Zigbee integration, the Danfoss Icon Zigbee module is used, which is connected to the Master Controller's app input.

Danfoss Icon2™ Main Controller for underfloor heating control. Basic model, 24V, 15 circuits. With pre-installed TWA conversion module and DK adapter with ground. Installation, adjustment and handover take place easily with the Danfoss Icon2™ Commissioning App.

Danfoss TWA-A thermal actuator 24 V NC. The thermal actuator TWA-A range is used with electrical on/off-controls to activate several types of Danfoss valves and floor heating manifolds. The actuator is equipped with a visual position indicator to show the

Danfoss TWA-K thermal actuator 24V NC. The thermal actuator TWA-K range is used with electrical on/off-controls to activate Heimeier, MNG and Oventrop valves with M30×1.5 connections. Other valves and floor heating manifolds with M30×1.5 connections may a

24V room thermostat for installation 80x80 with replaceable frames and touch display. Can be used with a floor sensor.

Danfoss 088U2122 Thermostat ZigBee Weiß

Danfoss A/S, 082F1071

Für diejenigen, die die gewünschte Temperatur einstellen und die aktuelle Temperatur sehen möchten. Funktionen von drahtlosen Display-Thermostaten • Temperaturbereichsbegrenzung • Drahtlose 2-Wege-Kommunikation • Touchscreen-Steuerung • Symbolbasierte Navigation • Geräuschloses Schalten • Batteriebetrieben (2 x 1,5 V)

Fußbodenheizungsventil für RA 2000 Sensoren. Das FHV-A selbsttätige Fußbodenheizungsventil bietet Temperaturregelung von Fußbodenheizungskreisen mit RA 2000 Raumthermostaten. Das Ventil ist mit Voreinstellung ausgestattet. Es ist dafür ausgelegt, in eine massive oder Trennwand eingebaut zu werden, wobei nur die runde Frontabdeckung und der Sensor bei der endgültigen Installation sichtbar sind. Das Ventil eignet sich für Klemmverschraubungen und wird mit eingebautem Entlüfter geliefert.

Danfoss TWA-A thermal actuator 230V NC. The thermal actuator TWA-A range is used with electrical on/off-controls to activate several types of Danfoss valves and floor heating manifolds. The actuator is equipped with a visual position indicator to show the

Der Danfoss FHM-C1 Shunt wird zur Regulierung der Fußbodenheizung verwendet.

Für diejenigen, die das System über eine Smartphone-App steuern möchten: App-Funktionen: Modul • Wi-Fi-Verbindung • Android-App • Apple-App • Temperaturen ändern • Zeitplan ändern

Erforderliches Modul für diejenigen, die ein drahtloses System haben möchten. Funktionen des Radio-Moduls: • Erforderliches Modul • Sendet und empfängt drahtlose Signale zwischen Raumthermostaten und Master Controller

DEVIpipeheat 10 V3, 6m Self limiting with Danish plug

Danfoss Durchflussthermostat Typ FH-TC für kompakte Fußbodenheizkreisverteiler mit selbstaktivierender thermostatischer Steuerung.

Danfoss SSM underfloor heating manifold in stainless steel with output for 6 heating circuits. SSM floor heating manifolds are equipped with integrated vents and filling/draining function on both flow and return manifold. Manifold SSM is used for heat control in underfloor heating systems. Each hose in the underfloor heating system is connected to the manifold, which makes it possible to regulate the heat supply to all rooms in the building independently. The manifold consists of a flow manifold and a return manifold. The flow manifold allows you to close each circuit independently. The manifold is without a built-in flowmeter. The return manifold is equipped with Danfoss' preset valves, which ensures optimal water balance in the system. The manifold valves can be controlled electronically using thermo actuators. The manifold is available in modules from 2-12 heating circuits. In addition, there are fittings that allow the manifolds to be combined in series - up to a maximum of 16 heating circuits. Ball valves are offered as an option for shutdown between the manifold and the rest of the system.

DEVIpipeheat 10 V3, 2m Self limiting with Danish plug

DEVIpipeheat 10 V3, 10m Self limiting with Danish plug

Danfoss Icon Master Controller 24V with 15 channels. Underfloor heating control for the Danfoss Icon series with 15 outputs for thermal actuators. Up to 15 room thermostats, wireless/wired, can be registered. The Master Controller must be combined with the Danfoss Icon radio module if wireless room thermostats are to be registered. Automatic balancing, active pump relay, function test and potential-free boiler relay are standard. It is possible to purchase the Danfoss Icon app-module which provides access to app-control of the underfloor heating system via an iOS or Android device. The app-module also provides access to online updating of the Master Controller firmware (OTA). Cooling control and demand-controlled flow temperature can be purchased using the Danfoss Icon expansion module. The Master Controller is compatible with Zigbee 3.0 systems such as Danfoss Ally or 3rd party Zigbee systems. For Zigbee integration, the Danfoss Icon Zigbee module is used, which is connected to the Master Controller's app input.

Danfoss IconTM Zigbee-Modul, 24V/drahtlos. Wird verwendet, um den Danfoss Icon-Master-Controller (088U1141 oder 088U1142) mit dem Zigbee 3.0-Netzwerk zu verbinden und kann somit über das Danfoss Ally Gateway oder ein Drittanbieter-Zigbee 3.0-kompatibles Gateway gesteuert werden.