Entwässerungsprodukte - Seite 32

Wavin PP sewer pipe 110x500mm SN4 EN13476

Wavin PP plug 110mm, blue

Exclusive frame design with upper section of solid 4-mm stainless steel.

Insert ensures a snug fit inside the drain unit.

The frame enhances the exclusive design of the floor drain.

Frame available in 10, 12, 15 and 25 mm heights (depending on the thickness of the floor tile).

NB! Frame height (H) = tile thickness + approximately 2 mm for tile mortar and membrane.

Complete floor drain against rear wall 700 mm, 10 mm frame, Column grate, 75 mm vertical outlet housing

Rahmen Unidrain 12 mm.

Water trap 50 mm water seal. Meets capacity and selfcleaning requirements according to EN 1253 (the panEuropean standard for floor drains) and is VA-approved. The water trap can be removed from the outlet unit and then dismantled for cleaning.

NOTE: Suitable only for outlet unit 1418.0050.

Rahmen Unidrain 10 mm.

Rahmen Unidrain 8 mm.

The grating is placed on a countersunk bearing in the frame, to hold it securely.

Only for use with ClassicLine frame.

Unidrain Armatur 1004, 1000 mm ohne Flansch.

For shower cubicles with open right-hand side, glass screen or similar.

The drain unit has two wall flanges.

Can be freely positioned against the back wall, independent of any side walls.

The drain unit has one wall flange.

For shower cubicles with open right-hand side, glass screen or similar.

The drain unit has two wall flanges.

For shower cubicles with open right-hand side, glass screen or similar.

The drain unit has two wall flanges.

For shower cubicles with open right-hand side, glass screen or similar.

The drain unit has two wall flanges.

Drain bowl jo-flex 110 mm with grate.

Fixture Unidrain 1004 700 mm ohne Flansch.

For shower cubicles with open left-hand side, glass screen or similar.

The drain unit has two wall flanges.

Drain bowl minimax low model 50 mm.

The grating is placed on a countersunk bearing in the frame, to hold it securely.

Only for use with ClassicLine frame.

Available in 8, 10 and 12 mm heights (depending on the thickness of the floor tile). The rubber insert ensures a snug fit inside the unit. A countersunk bearing ensures that the grating fits perfectly into the frame. The frame is non-optional and has two functions: To support the grating and give a perfectly flush finish with the tiled floor.

NB! Frame height (H) = tile thickness + approximately 2 mm for tile mortar and membrane.

Wear jo-flex for 153451.

PURUS floor drain bowl BRAGE 75 for vinyl floor vertical outlet Ø75mm w/white plastic grate and clamping ring, complete with water trap TYR 153479-225 VA-approved

Wechsel von Jo-Flex 11/4 Nippel auf 40 mm.

Geberit Doppelkammerfalle für Küchenspülen, mit abgewinkeltem Schlauchanschluss, vertikalem Auslass: d50mm G1 1/2 weiß alpin