Bosch - Seite 131 - Qualität zu günstigen Preisen

Bosch STAMPEPLADE 120X120MM SDS-MAX

103,99 € (87,39 €)

Verfügbar - 5-7 Werktage Lieferzeit

Bosch KOPSTÅLBØRSTE Ø75MM MESSING

Clean for Metal cup steel brush provides an extra fine surface finish. The cup steel brush is equipped with copper-coated, corrugated wire for light to moderately demanding cleaning tasks. It is suitable for removing coatings and rust and sanding paint on medium to large surfaces in metal and non-ferrous metals. This cup steel brush is also suitable for roughening, matting, and cleaning formwork boards and cladding. The copper-coated wires on the brush provide protection against corrosion. Brush wires are available in different thicknesses depending on how strong the abrasive effect needs to be. Thicker wires are more aggressive and provide a coarser but faster surface finish, while thinner wires provide finer, smoother surface results. It is intended for use with angle grinders with M14 thread.
Cup Steel Brush - Corrugated Wire, Brass Plated
Suitable For Light to moderately demanding cleaning tasks on medium to large surfaces of metal or base metals such as removal of coatings, removal of rusts, cleaning formwork boards & facades , roughening , matting , removing lacquer.
Fits Angle grinders with M 10 or M 14 thread as well as GGS 6 S Professional
Advantage: Corrosion protection thanks to brass-plated wire.

18,73 € (15,74 €)

Verfügbar - 5-7 Werktage Lieferzeit

Bosch NOTFRÆSER HM Ø12/AL:40MM 12MM SKAFT

The Wood Straight-bore head standard provides optimal cutting for common milling tasks. It has a high-quality tungsten carbide cutting edge that provides durable and reliable cutting results. Additionally, the bore head prevents kickback by limiting the thickness of the generated chips. It is intended for milling grooves, joints, notches and feather joints in soft and hard solid wood as well as composite wood. The bore head's long working length provides greater flexibility and deeper drilling in thick work materials. It is suitable for use with handheld, table-mounted portable milling machines and CNC machines.

26,83 € (22,55 €)

Verfügbar - 5-7 Werktage Lieferzeit

Bosch DIAMANTSKIVE 125X6MM TIL FUGEFRÆSNING

Die Scheibe ist für Winkelschleifer gedacht. Expert for Mortar Diamantscheiben entfernen Mörtel zwischen den Ziegeln. Die 6 mm dicke Diamantklinge ermöglicht das Entfernen von Mörtel, während die schützenden laser-geschweißten Diamantsegmente Robustheit gewährleisten. Verwende diese Scheibe zum Entfernen von Mörtel

113,17 € (95,10 €)

Verfügbar - 5-7 Werktage Lieferzeit

Bosch STØVAFSUG TIL PMF 190 E/250 CES

Staubabsaugung
Staubabsaugung für PMF 190 E, PMF 250 CES und GOP 300
zur Absaugung von Schleifstaub in Kombination mit der Schleifplatte AVZ 93 G (nicht Starlock-Version).
Wichtig! Bei Verwendung der Starlock-Schleifplatte AVZ 93 G muss die Staubabsaugung mit Ersatzteilnummer 2.609.256.D57 verwendet werden.

18,68 € (15,70 €)

Verfügbar - 5-7 Werktage Lieferzeit

Bosch RUNDSAVKLINGE PRECISION Ø235X2X30/25 T48

Kreissägeblatt mit 235 mm Blattdurchmesser, 48 Zähnen, 2.5 mm Schnittfuge und 30 mm Bohrung mit 25 mm Reduzierring.

Bosch Circular Saw Blade PRECISION ist für Holz und Akustikplatten ausgelegt und bietet dank des mitgelieferten Reduzierrings und klar spezifizierter Bohrungsoptionen eine präzise Passform bei kompatiblen Sägen.

27,55 € (23,15 €)

Verfügbar - 5-7 Werktage Lieferzeit

Bosch ADAPTER TIL IXO 4 EXCENTRISK

Exzentrischer Aufsatz
Optimal für Schraubarbeiten in der Nähe des Randes
Passt zu Bosch Akkuschrauber IXO III, IXO IV und IXO V.

17,37 € (14,60 €)

Verfügbar - 5-7 Werktage Lieferzeit

Bosch SPÆNDETANG 3/8

Verwende nicht auf Wellenbuchsen. Die Spannzange klemmt den Fräser ein. Verwende immer die richtige Größe der Spannzange, um Gefahren während des Gebrauchs zu vermeiden.
Spannzange

38,12 € (32,03 €)

Verfügbar - 5-7 Werktage Lieferzeit

Bosch METALBOR HSS-G 9.2X125MM 5 STK

The ground HSS spiral drill bit for drilling through metal with maximum precision. The exposed 135-degree split self-centering point of the drill head combines active cutting with perfect centering without displacement for maximum precision. With the split tip, it is also unnecessary to mark center points in advance or pilot drill up to 10 mm. This precision-ground drill head, made of HSS (high-speed steel), provides up to 40% faster drilling and up to 50% lower clamping pressure than standard ground HSS cutting edge drill heads. This drill head is designed for drilling holes in alloyed and non-alloyed steel, cast steel, cast iron, sintered iron, reduced cast iron, non-ferrous metals and hard plastic. The ground HSS spiral drill bit is manufactured according to DIN 338. The type N (notch angle) of the borehead has a 135-degree point and a diameter tolerance of h8. It has a cylindrical shaft system (the shaft has the same diameter as the borehead) and is intended for use in drilling stands and screwdrivers.
Package with five pieces.

21,44 € (18,02 €)

Verfügbar - 5-7 Werktage Lieferzeit

Bosch TRINBOR 4-12MM HSS 9 TRIN

The step drill bit is made of HSS (high-speed steel) and provides a long lifespan when used with coolant. Laser-marked numbers on both flutes provide highly visible and durable marking of the hole diameter. Additionally, the 3-flat shank prevents slipping in the drill chuck and provides efficient transmission with high torque. The HSS step drill head delivers smooth, burr-free drilling in multiple diameters with a single bit. It is ideal for deburring, drilling round holes, and enlarging existing ones. No center punch is needed because the split point allows for easy starting. Its CNC-ground flute enables optimized chip removal and less vibration for smooth drilling. The most optimal cutting edge and absolute smoothness are ensured thanks to axial and radial relief grinding. This step drill bit is suitable for use on thin materials such as non-ferrous metals, sheet plastic, sheet steel, plastic, and stainless steel.
9 steps Ø 4-5-6-7-8-9-10-11-12 mm

40,06 € (33,66 €)

Verfügbar - 5-7 Werktage Lieferzeit

Bosch METALBOR HSS-G S 13.0X151MM 5STK

Bohrer, Spiralbohrer, 13 mm, zylindrisch, Länge: 151 mm (Packung mit 5)

43,01 € (36,14 €)

Verfügbar - 5-7 Werktage Lieferzeit

Bosch DIAMANTSKIVE 125MM PROF ABRASIVE

Der Standard für die Diamantschleifscheibe sorgt für effiziente Schnitte in allen Arten von abrasiven Materialien. Das optimierte Diamantprogramm garantiert ein gutes Ergebnis dank der hohen Qualitätsstandards der Scheibe, die vom Bosch Diamond Competence Center in der Schweiz gewährleistet werden. Verwende diese Scheibe zum Schneiden aller Arten von abrasiven Materialien

20,77 € (17,45 €)

Verfügbar - 5-7 Werktage Lieferzeit

Bosch HAMMERBOR MAX 8X 16X340MM

Bohrer, für Beton, Mauerwerk, Stahlbeton, 16 mm, SDS-max, Länge: 340 mm

56,40 € (47,40 €)

Verfügbar - 5-7 Werktage Lieferzeit

Bosch KUFFERT TIL GBH 2-26

Es ist aus leichtem Kunststoff gemacht. Für Bohrhämmer. Der Plastik-Transportkoffer wird zur sicheren Aufbewahrung und zum Transport von Bosch Elektrowerkzeugen verwendet. Transportkoffer

27,49 € (23,10 €)

Verfügbar - 5-7 Werktage Lieferzeit

Bosch FLADDYVLER GR 10 1000 STK

.

76,95 € (64,66 €)

Verfügbar - 5-7 Werktage Lieferzeit

Bosch BITSSÆT ROBUSTLINE L1 XH PH/PZ/TX 18 STK

This Extra Hard screwdriver bit is a good choice for versatile use. All tasks can be performed thanks to the bit's modified S2 steel and an optimized heat treatment process, which provides extra hardness and enables sufficient performance for all tasks. The tapered torsion zone of the bit easily handles maximum rotational speeds when absorbing force and vibrations during screw installation, making it suitable for all tasks. This robust and compact set comes with a transparent storage box that provides good visibility of the contents as well as secure storage and transport. It has an external 1/4 inch hexagonal shaft and is designed for universal mounting of screws with screwdrivers and power drills.
Robust Line bit set L extra hard with 18+1 pieces
Bit length 25 mm, ISO 1173 C6.3, with quick-change universal holder

37,74 € (31,71 €)

Verfügbar - 5-7 Werktage Lieferzeit

Bosch METALBOR POINTTEC HSS-R 8.7MM 10 STK

Bosch HSS Twist Drill Bits PointTeQ

19,93 € (16,75 €)

Verfügbar - 5-7 Werktage Lieferzeit

Bosch sanding fleece exc sic 125mm fine 5 pcs

Boschsanding fleece exc sic 125mm fine 5 pcs

20,94 € (17,60 €)

Verfügbar - 5-7 Werktage Lieferzeit

Bosch FORSTNERBOR HM 25MM

This hinge cutter bit is equipped with a cylindrical shaft system and is intended for portable screwdrivers and drill stands. The carbide hinge cutter bit ensures precise results in abrasive materials. The bit's special properties make it the preferred tool of machine carpenters and carpenters, especially in the production of windows, doors, and kitchens. The bit, which is made with carbide cutters with diamond-ground tungsten achieves impressive results. In addition, the centering point guarantees a perfect start to drilling, and the two primary and two secondary side cutters effortlessly cut through materials to achieve extremely precise and splinter-free bottom hole diameters. The bit is particularly suitable for abrasive materials on hard wood, plywood, chipboard, and fiberboard.
Package with 1 piece.

27,59 € (23,19 €)

Verfügbar - 5-7 Werktage Lieferzeit

Bosch Shrub Shears Blade for Secateurs 120 mm

Schermesser, Länge: 120 mm

19,62 € (16,49 €)

Verfügbar - 5-7 Werktage Lieferzeit

Bosch METALBOR HSS-CO S 5.5X93MM 10STK

The HSS cobalt spiral drill provides long-lasting performance when drilling in stainless steel. The extended lifespan is due to a 5% cobalt alloy content and fully ground HSS (high-speed steel), which provides outstanding surface quality, wear resistance, and heat protection. Equipped with two cutting edges and two flutes, chips are removed quickly so the hammer drill lasts even longer. This hammer drill can be used for alloyed and unalloyed steel, stainless steel, cast iron, cast steel, acid- and heat-resistant steel. The HSS spiral drill made of steel is manufactured according to DIN 338. The drilling head is of type N (notch angle) with a 135-degree point angle and a diameter tolerance of h8. Active cutting and perfect centering without displacement are achieved thanks to the two-part tip. This drilling head can be used for alloyed and unalloyed steel, stainless steel, cast iron, cast steel as well as acid- and heat-resistant steels. It has a cylindrical shaft system (the shaft has the same diameter as the drilling head) intended for use in boring stands or screwdrivers.
Package of 10 pieces.

24,14 € (20,29 €)

Verfügbar - 5-7 Werktage Lieferzeit

Bosch MATRICE GNA 3.5

Nibbler die plate, for sheet metal, corrugated metal

126,48 € (106,29 €)

Verfügbar - 5-7 Werktage Lieferzeit

Bosch SDS-plus-9

Kernschneider, für Beton, Mauerwerk, Kalkstein, 40 mm, M16, Länge: 72 mm

61,71 € (51,86 €)

Verfügbar - 5-7 Werktage Lieferzeit

Bosch DIAMANTBORSÆT 38/52/65/117/127 PROF UNIV

Diamant-Bohrersatz, für Mauerwerk, Ziegelsteine, 5 Stücke, 127 mm, 38 mm, 65 mm, 52 mm, 117 mm

255,19 € (214,45 €)

Verfügbar - 5-7 Werktage Lieferzeit

Bosch MUZ9PS1

Pommes-Scheibe für den Küchenhelfer, Edelstahl

21,52 € (18,08 €)

Verfügbar - 5-7 Werktage Lieferzeit

Montag - Freitag:	09:00 - 15:00 Uhr
Samstag, Sonntag & dänischen Feiertagen:	Geschlossen