Bosch - Seite 130 - Qualität zu günstigen Preisen

Menu

Hilfe

Artikel in Ihrer Suche: 3828
Bosch Universal diamond cutting disc 125 mm

Diamanttrennscheibe für universelle Schnitte mit 125 mm Durchmesser, 22.23 mm Bohrung, 1.7 mm Schnittbreite und 7 mm Segmenthöhe.
Bosch Universal Diamanttrennscheibe ist für Materialien wie Beton, Dachziegel und Sandstein ausgelegt, ist markenübergreifend kompatibel und hat eine metallische Oberfläche; geliefert als 1 Stück pro Packung.

18,48 € (15,53 €)

2574224

Verfügbar - 5-7 Werktage Lieferzeit
Bosch SPÆNDETANG 3/8
Verwende nicht auf Wellenbuchsen. Die Spannzange klemmt den Fräser ein. Verwende immer die richtige Größe der Spannzange, um Gefahren während des Gebrauchs zu vermeiden.
Spannzange

38,12 € (32,03 €)

2838159

Verfügbar - 5-7 Werktage Lieferzeit
Bosch SDS-plus-5
Bohrer, für Beton, Mauerwerk, Stahlbeton, 10 Stücke, 5 mm, SDS-plus, Länge: 115 mm

31,72 € (26,66 €)

2508948

Verfügbar - 5-7 Werktage Lieferzeit
Bosch SDS-plus-5
Bohrer, für Beton, Mauerwerk, Stahlbeton, 10 Stücke, 8 mm, SDS-plus, Länge: 165 mm

39,28 € (33,01 €)

2508958

Verfügbar - 5-7 Werktage Lieferzeit
Bosch HAMMERBOR SDS P-5 7X465MM
The SDS plus-5 drill bit ensures problem-free drilling. The grooved carbide tip with notches ensures smooth drilling and easily penetrates the material without getting stuck, even in concrete. The Activeteq centering tip guides the drill position from the start without shaking or displacement and ensures precise hole diameter. AWB soldering and hardening technology reduces vibration during drilling work, so the user is not burdened. The drill bit is suitable for masonry and concrete. The visible wear indicator shows if the hole diameter is still within tolerance when inserting dowels. The drill head is PGM certified by the PGM Masonry Drill Bit Association Board, guaranteeing tight tolerances, accurate drilling, and efficient fastening. The drill head is made in Germany. Compatible with SDS plus holder rotary hammers.
Package of 1 piece.

21,02 € (17,66 €)

2838738

Verfügbar - 5-7 Werktage Lieferzeit
Bosch FORSTNERBOR HM 25MM
This hinge cutter bit is equipped with a cylindrical shaft system and is intended for portable screwdrivers and drill stands. The carbide hinge cutter bit ensures precise results in abrasive materials. The bit's special properties make it the preferred tool of machine carpenters and carpenters, especially in the production of windows, doors, and kitchens. The bit, which is made with carbide cutters with diamond-ground tungsten achieves impressive results. In addition, the centering point guarantees a perfect start to drilling, and the two primary and two secondary side cutters effortlessly cut through materials to achieve extremely precise and splinter-free bottom hole diameters. The bit is particularly suitable for abrasive materials on hard wood, plywood, chipboard, and fiberboard.
Package with 1 piece.

27,59 € (23,19 €)

2839126

Verfügbar - 5-7 Werktage Lieferzeit
Bosch FORSTNERBOR HM 34MM
This hinge cutter bit is equipped with a cylindrical shaft system and is intended for portable screwdrivers and drill stands. The carbide hinge cutter bit ensures precise results in abrasive materials. The bit's special properties make it the preferred tool of machine carpenters and carpenters, especially in the production of windows, doors, and kitchens. The bit, which is made with carbide cutters with diamond-ground tungsten achieves impressive results. In addition, the centering point guarantees a perfect start to drilling, and the two primary and two secondary side cutters effortlessly cut through materials to achieve extremely precise and splinter-free bottom hole diameters. The bit is particularly suitable for abrasive materials on hard wood, plywood, chipboard, and fiberboard.
Package with 1 piece.

40,65 € (34,16 €)

2839131

Verfügbar - 5-7 Werktage Lieferzeit
Bosch J450 115 mm x 50 m - 80
Sanding paper J450 Expert for Wood and Paint, width: 115 mm, length: 50 m, grit: 80

41,07 € (34,51 €)

2720764

Verfügbar - 5-7 Werktage Lieferzeit
Bosch KOPSTÅLBØRSTE Ø75MM MESSING
Clean for Metal cup steel brush provides an extra fine surface finish. The cup steel brush is equipped with copper-coated, corrugated wire for light to moderately demanding cleaning tasks. It is suitable for removing coatings and rust and sanding paint on medium to large surfaces in metal and non-ferrous metals. This cup steel brush is also suitable for roughening, matting, and cleaning formwork boards and cladding. The copper-coated wires on the brush provide protection against corrosion. Brush wires are available in different thicknesses depending on how strong the abrasive effect needs to be. Thicker wires are more aggressive and provide a coarser but faster surface finish, while thinner wires provide finer, smoother surface results. It is intended for use with angle grinders with M14 thread.
Cup Steel Brush - Corrugated Wire, Brass Plated
Suitable For Light to moderately demanding cleaning tasks on medium to large surfaces of metal or base metals such as removal of coatings, removal of rusts, cleaning formwork boards & facades , roughening , matting , removing lacquer.
Fits Angle grinders with M 10 or M 14 thread as well as GGS 6 S Professional
Advantage: Corrosion protection thanks to brass-plated wire.

18,73 € (15,74 €)

2840089

Verfügbar - 5-7 Werktage Lieferzeit
Bosch NOTFRÆSER HM Ø12/AL:40MM 12MM SKAFT
The Wood Straight-bore head standard provides optimal cutting for common milling tasks. It has a high-quality tungsten carbide cutting edge that provides durable and reliable cutting results. Additionally, the bore head prevents kickback by limiting the thickness of the generated chips. It is intended for milling grooves, joints, notches and feather joints in soft and hard solid wood as well as composite wood. The bore head's long working length provides greater flexibility and deeper drilling in thick work materials. It is suitable for use with handheld, table-mounted portable milling machines and CNC machines.

26,83 € (22,55 €)

2840160

Verfügbar - 5-7 Werktage Lieferzeit
Bosch TRINBOR 4-12MM HSS 9 TRIN
The step drill bit is made of HSS (high-speed steel) and provides a long lifespan when used with coolant. Laser-marked numbers on both flutes provide highly visible and durable marking of the hole diameter. Additionally, the 3-flat shank prevents slipping in the drill chuck and provides efficient transmission with high torque. The HSS step drill head delivers smooth, burr-free drilling in multiple diameters with a single bit. It is ideal for deburring, drilling round holes, and enlarging existing ones. No center punch is needed because the split point allows for easy starting. Its CNC-ground flute enables optimized chip removal and less vibration for smooth drilling. The most optimal cutting edge and absolute smoothness are ensured thanks to axial and radial relief grinding. This step drill bit is suitable for use on thin materials such as non-ferrous metals, sheet plastic, sheet steel, plastic, and stainless steel.
9 steps Ø 4-5-6-7-8-9-10-11-12 mm

40,06 € (33,66 €)

2838728

Verfügbar - 5-7 Werktage Lieferzeit
Bosch DIAMANTSKIVE 125X6MM TIL FUGEFRÆSNING
Die Scheibe ist für Winkelschleifer gedacht. Expert for Mortar Diamantscheiben entfernen Mörtel zwischen den Ziegeln. Die 6 mm dicke Diamantklinge ermöglicht das Entfernen von Mörtel, während die schützenden laser-geschweißten Diamantsegmente Robustheit gewährleisten. Verwende diese Scheibe zum Entfernen von Mörtel

113,17 € (95,10 €)

2600257

Verfügbar - 5-7 Werktage Lieferzeit
Bosch HAMMERBOR SDS-P P3 25X300/350MM
The SDS plus-3 drill bit has long durability when drilling in reinforced concrete. The Dura design with four grooves ensures increased durability with effective dust removal and reduced heat development. The drill bit is made of high-alloy steel with optimized hardening technology, which increases wear resistance. The serrated cutting edges are made of an extra robust carbide material developed and produced by Bosch. The drill bit is PGM certified by the PGM Masonry Drill Bit Association Board and guarantees tight tolerances, precise drilling, and efficient fastening. The drill bit is intended for drilling in concrete and masonry together with SDS plus holders for rotary hammers.
Package contains 1 piece.

30,52 € (25,65 €)

2840762

Verfügbar - 5-7 Werktage Lieferzeit
Bosch BAGSKIVE PLAST X-LOCK VELCRO 115MM
Stützteller, 115 mm, X-LOCK

19,17 € (16,11 €)

2740138

Verfügbar - 5-7 Werktage Lieferzeit
Bosch STØVAFSUG TIL PMF 190 E/250 CES
Staubabsaugung
Staubabsaugung für PMF 190 E, PMF 250 CES und GOP 300
zur Absaugung von Schleifstaub in Kombination mit der Schleifplatte AVZ 93 G (nicht Starlock-Version).
Wichtig! Bei Verwendung der Starlock-Schleifplatte AVZ 93 G muss die Staubabsaugung mit Ersatzteilnummer 2.609.256.D57 verwendet werden.

18,68 € (15,70 €)

2836305

Verfügbar - 5-7 Werktage Lieferzeit
Bosch RUNDSAVKLINGE PRECISION Ø235X2X30/25 T48

Kreissägeblatt mit 235 mm Blattdurchmesser, 48 Zähnen, 2.5 mm Schnittfuge und 30 mm Bohrung mit 25 mm Reduzierring.
Bosch Circular Saw Blade PRECISION ist für Holz und Akustikplatten ausgelegt und bietet dank des mitgelieferten Reduzierrings und klar spezifizierter Bohrungsoptionen eine präzise Passform bei kompatiblen Sägen.

27,55 € (23,15 €)

2836426

Verfügbar - 5-7 Werktage Lieferzeit
Bosch HÅNDGREB TIL GBH 4-26 DFR 60MM
Der Zusatzgriff macht es sicher, mit einem Bohrhammer zu arbeiten.
Griff für Bohrhämmer

18,48 € (15,53 €)

2837541

Verfügbar - 5-7 Werktage Lieferzeit
Bosch HAMMERBOR MAX 8X 16X340MM
Bohrer, für Beton, Mauerwerk, Stahlbeton, 16 mm, SDS-max, Länge: 340 mm

56,40 € (47,40 €)

2962003

Verfügbar - 5-7 Werktage Lieferzeit
Bosch KUFFERT TIL GBH 2-26
Es ist aus leichtem Kunststoff gemacht. Für Bohrhämmer. Der Plastik-Transportkoffer wird zur sicheren Aufbewahrung und zum Transport von Bosch Elektrowerkzeugen verwendet. Transportkoffer

27,49 € (23,10 €)

2837573

Verfügbar - 5-7 Werktage Lieferzeit
Bosch BITSSÆT ROBUSTLINE L1 XH PH/PZ/TX 18 STK
This Extra Hard screwdriver bit is a good choice for versatile use. All tasks can be performed thanks to the bit's modified S2 steel and an optimized heat treatment process, which provides extra hardness and enables sufficient performance for all tasks. The tapered torsion zone of the bit easily handles maximum rotational speeds when absorbing force and vibrations during screw installation, making it suitable for all tasks. This robust and compact set comes with a transparent storage box that provides good visibility of the contents as well as secure storage and transport. It has an external 1/4 inch hexagonal shaft and is designed for universal mounting of screws with screwdrivers and power drills.
Robust Line bit set L extra hard with 18+1 pieces
Bit length 25 mm, ISO 1173 C6.3, with quick-change universal holder

37,74 € (31,71 €)

2837804

Verfügbar - 5-7 Werktage Lieferzeit
Bosch FUGEMEJSEL 280MM SDS-MAX
It is compatible with SDS max shaft systems. The SDS max pointed chisel with tungsten carbide cutting edge provides easy removal of mortar and has an extremely long lifespan. The chisel's blade with hard metal cutting edges makes it extra robust and gives it an impressive long durability and lifespan. The chisel is intended for use in concrete and bricks for tasks such as renovating mortar joints in masonry and removing plaster and mortar.
Pointed chisel with hard metal tip
SDS max pointed chisel with hard metal tip ensures easy removal of mortar and has an extremely long lifespan

136,08 € (114,35 €)

2837894

Verfügbar - 5-7 Werktage Lieferzeit
Bosch DYKKERT 1.6/16G 50MM 2500 STK
They are designed for the Bosch compressed air nail gun GSK 64 Professional. The staples with countersunk head, 1.6/16 g, are galvanized and therefore rust-protected. This makes them ideal for indoor construction tasks within usage class 1 (DIN EN 1995-1-1). They are suitable for a variety of purposes in box construction such as fastening upholstery, door and window frames, picture frames, furniture manufacturing and wall coverings. They can also be used in fiber gypsum boards. These staples provide a strong joint with heads that are virtually invisible, making it quick and easy to install board cladding, baseboards and decorative moldings. The staples with countersunk head, 1.6/16 g, are made in Europe which ensures consistent high quality.
galvanized finish

22,51 € (18,92 €)

2838021

Verfügbar - 5-7 Werktage Lieferzeit
Bosch SLIBEFLEECE FILT 10MX115MM HVID CLEAN
Bosch 2 608 901 226 Handschleif-Zubehör Reinigungswalze 1 Stück(e)

33,41 € (28,08 €)

2963128

Verfügbar - 5-7 Werktage Lieferzeit
Bosch BAJONETSAVKL S 1122 EF METAL 228MM 5 STK
Saw blade, for pipes, sheet metal, profiles, length: 225 mm, width: 19 mm (pack of 5)

21,28 € (17,88 €)

2602185

Verfügbar - 5-7 Werktage Lieferzeit
Bosch BLÆSEDYSESÆT TIL GBL 18V-120
Die Blasdüse ist ein Zubehörteil für den Einsatz mit dem Bosch GBL V18-120
Blasdüse

21,00 € (17,65 €)

2647145

Verfügbar - 5-7 Werktage Lieferzeit
- «
- 1
- ...
- 128
- 129
- 130
- 131
- 132
- ...
- 154
- »