T-piece- gunmetal- solder connection, Rp-threadd1: 22, Rp: 34, d2: 22

Adapter - gunmetal - gelötete Verbindung, R-Gewinde: 12, R: 12

Ellenbogen 90° - Kupfer - gelötete Verbindung, Steckende: 22

Fittings with threads in acc. with DINEN 10226, Part 1, certified for drinking water in acc. with DIN 1988 and gas installations in acc. with TRGI 2008 (observe notes on the model), tested in acc. with DVGW worksheet GW 6 and GW 393.CertificatesGunmetal threaded fittings – DVGW-Reg.-No. DV-7401AO2957Threaded connectionsR-external thread, produced on site – hempen without roughening of the thread is possible.

T-piece- gunmetal or silicon bronze- Rp-threads

Viega 2312

Viega 2317.2

Viega 95002A

Extension- gunmetal- R-thread, Rp-thread

Ellenbogen 45° - Kupfer - gelötete Verbindung, Steckende: 15 (Qualitätssiegel für d12-54)

T-piece - copper - solder connection.

Sanpress Inox XL Reducer with SC-Contur- steel non-corroding- plug-in end, press connectionComponentsEPDM sealing element, cutting ring, separator ring, VdS certification d1: 88,9 d2: 76,1

Easytop Ball valve with SC-Contur- press connectorsComponentsValve casing gunmetal or silicium bronze according to DIN 50930-6 / DIN EN 1982, maintenance-free selector shaft, actuation lever T-form with medium marking green/red exchangeable, stainless steel ball, EPDM sealing elements.Technical dataoperating pressure max. 1.6 MPa (PN 16)operating temperature max. 110 °Cwith DVGW-test markDN: 50, d: 54

Viega 2216

Press connector system with press connectors made of gunmetal, pipes made of stainless steel material Nos. 1.4401 and 1.4521 in acc. with DINEN 10088, DIN EN 10312, DVGW worksheet GW 541, system certification for connectors and pipes in acc. with DVGW worksheet W 534, for drinking water installations in acc. with DIN 1988. For dimensionally stable concealed and pre-wall installations of manifold and riser pipes in Viega component assembly.Press connectorsAll sizes with SC-Contur – connections, which remain unpressed become visible when the system is filled. The SC-Contur is certified and fulfils the requirements of DVGW worksheet W 534, point 12.14, connectors with forced leakage.During leakage tests with water, Viega guarantees the identification of unpressed connections in the pressure range 0.1 MPa–0.65 MPa, in the case of a dry leakage test with compressed air or noble gases from 22 hPa–0.3 MPa.MarkingGreen dot on the press connectionSealing elementsEPDM, black (ethylene

Raxofix Wall plate with SC-Contur- silicium bronze- press connection, Rp-threadd: 16, Rp: 12

Raxofix Adapter elbow 90° with SC-Contur- silicium bronze- press connection, Rp-threadd: 20, Rp: 12

Raxofix Coupling with SC-Contur- Silicium bronze - press connection d1: 20, d2: 20

Raxofix Verbindungsschraubfitting mit SC-Contur- Siliziumbronze- Pressanschluss, G-Gewinde- Flachdichtungskomponenten EPDM-Dichtelement d: 20, G: 34

Raxofix Coupling with SC-Contur- silicium bronze- press connectiond1: 25, d2: 16

Raxofix T-Stück mit SC-Contur- Siliciumbronze-Pressverbindern d1: 20, d2: 16, d3: 20

Raxofix Adapter with SC-Contur- silicium bronze- press connection, Rp-threadd: 25, Rp: 34

Raxofix Adapter with SC-Contur- silicium bronze- press connection, Rp-threadd: 25, Rp: 1

Flow-optimised press connector system for drinking water installations in acc. with DIN 1988 and DIN 50930-6 as well as heating installations, tested in acc. with DVGW worksheet W 534.Press connectorsSafe and fast processing without calibration of the pipe ends through O-ring-free press technology in all dimensions. In this way, widening or calibration of the pipe-ends becomes superfluous and reduces the assembly times. The interaction between aerodynamic radii and minimal cross-section narrowings ensure the lowest pressure losses in press systems for multilayer pipes. This allows a smaller dimensioning of drinking water installations and reduces the pipeline volume.SC-ConturAll sizes with SC-Contur – connections, which remain unpressed become visible when the system is filled. The SC-Contur is certified and fulfils the requirements of DVGW worksheet W 534, point 12.14, connectors with forced leakage.During leakage tests with water, Viega guarantees the identification of unpressed connections in the pressure range 0.1 MPa–0.65 MPa, in the case of a dry leakage test with compressed air or noble gases from 22 hPa–0.3 MPa.MarkingGreen dot on the press connectionPipesRaxofix PE-Xc/Al/PE-Xc•dimensionally stable, oxygen-proof in acc. with DIN 4726, greyRaxofix PE-Xc•flexible, blackDimensionsPress connectors and pipes•Raxofix-PE-Xc/Al/PE-Xc: d 16/20/25/32/40/50/63•Raxofix PE-Xc: d 16/20Areas of application PE-Xc/Al/PE-XcDrinking waterHeatingRainwaterCompressed airAreas of application PE-XcRainwaterDrinking waterUse of the system for application areas other than those described here must be agreed with Viega Service Center.Operating conditionsDrinking water installations•Operating temperature max. 70 °C•Operating pressure max. 1.0 MPaHeating installations•Operating temperature max. 80 °C•Operating pressure max. 1.0 MPaIrrelevant of the direction of flow, mixed installations are permitted.NoteThe DVGW test mark is only valid f

Raxofix Adapter elbow 90° with SC-Contur- silicium bronze- press connection, R-threadd: 16, R: 34