Elbow 90°- gunmetal- R-thread, Rp-thread

Schraubanschluss - Gunmetal - Rp-Gewinde - konische Dichtung

Plug- gunmetal- R-threadComponentsQuadraticR: 2

Schraubanschluss - Gunmetal - Rp-Gewinde - konische Dichtung

Viega 2626.1

Viega 2626.1

Viega 2616

Profipress G-Kupplung mit SC-Contur - Kupfer-Presseverbinder Komponenten HNBR-Dichtelemente d: 35

Profipress G T-stykke med SC-Contur- kobber- prestilslutningMedHNBR pakningerd1: 28, d2: 22, d3: 28

Crossover-Kupfer-Lötverbindungen: 22 (Qualitätssiegel für d12-54)

Viega 2218

Sanpress T-piece with SC-Contur- gunmetal or silicium bronze- press connectorsComponentsEPDM sealing elementsd1: 28, d2: 22, d3: 22

Easytop-Ablassventil• Rotguss• G-Gewinde: 14

Press connector system with press connectors made of copper and gunmetal tested in acc. with DVGW worksheet W 534 with DVGW test seal and pipes made of copper in acc. with EN 1057 in acc. with DVGW worksheet GW 392.Suitable for drinking water installations in acc. with DIN 1988.For dimensionally stable concealed and pre-wall installations of manifold and riser pipes in Viega component assembly.Press connectorsAll sizes with SC-Contur – connections, which remain unpressed become visible when the system is filled. The SC-Contur is certified and fulfils the requirements of DVGW worksheet W 534, point 12.14, connectors with forced leakage.During leakage tests with water, Viega guarantees the identification of unpressed connections in the pressure range 0.1 MPa–0.65 MPa, in the case of a dry leakage test with compressed air or noble gases from 22 hPa–0.3 MPa.MarkingGreen dot on the press connectionSealing elementsEPDM, black (ethylene-propylene-dien-monomer rubber), up to 110 °C

Forcing plug- for leakage test, temporarily closed pipeline section- brass- compression fitting, hose connection for filling hoseComponentsKFE tap, union nut screw fittingd: 28

Raxofix Adapter elbow 90° with SC-Contur- silicium bronze- press connection, R-threadd: 32, R: 1

Viega 2311.1

Sanpress Inox Connection screw fitting with SC-Contur- steel non-corroding- press connection, G-thread- flat sealingComponentsEPDM sealing element, EPDM flat seal, union nut screw fitting d: 18, G: 34

Sanpress Inox Adapter with SC-Contur- steel non-corroding- press connection, R-thread Components EPDM sealing element, polygon, VdS certificationd: 28, R: 34

Sanpress Inox Adapter with SC-Contur- steel non-corroding- press connection, R-thread Components EPDM sealing element, polygond: 18, R: 34

Versandtasche, International B4 (250 x 353 mm), Wallet, offenes Ende, selbstklebend (abziehen und aufkleben), braun, Packung mit 100

Viega 3241

Plug-in piece - gunmetal - plug-in end, Rp-thread d: 22, Rp: 34

Sanpress Inox Adapter elbow 90° with SC-Contur- steel non-corroding- press connection, R-threadComponentsEPDM sealing element, polygon, VdS certificationd: 22, R: 34

Sanpress Inox Adapter elbow 90° with SC-Contur- steel non-corroding- press connection, R-threadComponentsEPDM sealing element, polygond: 15, R: 12