Duka Ventilation - Seite 2

Transition piece Ø133/140/152mm. Cut the transition piece to the dimension to be used. With the Duka click system, two transition pieces are clicked together.

Flap valve Type 112, 100x150 mm, white

Has small ribs under the slanted blinds to keep insects and other small animals out. Suitable for wall penetration type 201.

Duka Fan SmartFan TH, Ø100/125 mm, white

Flex hose Ø152x3000 mm, white

Telescopic pipe for wall, with sound insulation. Can be adjusted in length. Valves and grates are mounted on these with a click system. Type 204 can be extended with an extra piece.

Kanalventilator mit Kugellagern zur Montage im Dachraum direkt im Lüftungskanal aus Bad oder Hauswirtschaftsraum. Der Ventilator kann direkt zwischen zwei Duka Kunststoff-Lüftungsrohren eingesetzt werden. Durchmesser: 100mm

Reduction to white ventilation pipes.

Flex hose Ø162x6000 mm, white

Lizenz + 3 Jahre Wartung, 1 Benutzer, Reg., ESD, Win, Mac

With a telescopic valve, you get a complete solution for ventilation in your home. A complete telescopic valve with sound-insulated wall feed-through, insect net, external gray, red or white louvre grille, internal white wall valve with cord pull, dust filter and condensation-insulated lid. Used for wall thicknesses from 260-400 mm. Can be extended with a 20 cm. extension tube. Sound attenuation in the closed position is 45 dB and in the fully open position is 26 dB. Note during installation: It is best to install telescopic valves in the outer walls - approx. 100 mm from ceiling. There should be two valves per room, depending on the size of the room. The valves must always be placed opposite each other so that the air circulation proceeds effortlessly. If possible, the valves should be placed on the west and east sides of the house, since the wind in Denmark mainly comes from the west.

Flex hose with insulation Ø127x4000 mm, white

Duka Mounting sleeve 10-15 cm Type 212

Complete telescopic valve with extra sound-insulated wall feed-through, insect net, external gray louvre grille, internal white wall valve with cord pull, dust filter and condensation-insulated cover. Used for wall thicknesses from 260-400 mm. Can be extended with a 20 cm. extension tube. Sound attenuation in the closed position is 62 dB and in the fully open position is 47 dB.

Used for wall penetration type 202. With the Duka click system, two transition pieces are clicked together. Thereby, two different channel dimensions are combined in an easy and simple way. Always remember to seal with glue or silicone. Colour: White Manufactured in Polystyrene (HIPS).

Exhaust and intake valve Type 125 VRF, Ø125 mm, white

90° bend for round white ventilation pipes.

Flex hose with insulation Ø162x4000 mm, white

Valve with frame and screw cap, adjusted by turning the screw cap.

Flap valve Type 111, 150x150 mm, white

Fan without controls. Timeless and smooth front. 68 m3/h - sound level 26 dB(A) - 3 year warranty.

Used when the fan S7 does not cover the duct opening. With rubber seal on the back and 4 screws for installation.

Jalousie grid Type 152.1, 150 mm x 150 mm, metal

Ventilation grille Type 460, 400x60 mm, alu

Used for mounting in cupboards and interior doors. Ensures the necessary extraction.