Tech-Protect - Seite 61

The Tech-Protect Magmat MagSafe case combines elegant design with the highest level of protection. The hybrid design uses high-quality TPU and PC components, guaranteeing comprehensive protection for your smartphone.

The flexible frame made of polyurethane plastic perfectly absorbs impacts and protects the phone during falls, while the hard polycarbonate back effectively protects against scratches and mechanical damage. The transparent finish emphasizes the original appearance of the device, while maintaining its unique character.

The raised form of the housing around the camera and screen protects the most sensitive components from contact with a flat surface. The built-in magnetic ring ensures full MagSafe compatibility, allowing you to use magnetic accessories. Precise cutouts guarantee full access to all ports, buttons and speakers.

The Tech-Protect Magmat MagSafe case combines elegant design with the highest level of protection. The hybrid design uses high-quality TPU and PC components, guaranteeing comprehensive protection for your smartphone.

The flexible frame made of polyurethane plastic perfectly absorbs impacts and protects the phone during falls, while the hard polycarbonate back effectively protects against scratches and mechanical damage. The transparent finish emphasizes the original appearance of the device, while maintaining its unique character.

The raised form of the housing around the camera and screen protects the most sensitive components from contact with a flat surface. The built-in magnetic ring ensures full MagSafe compatibility, allowing you to use magnetic accessories. Precise cutouts guarantee full access to all ports, buttons and speakers.

Stylish and simple design and a high level of protection are synonymous with the new Magmat case from the Tech-Protect brand. High-quality TPU and PC components were used to produce the cover. The flexible frame made of polyurethane plastic will perfectly protect against shocks and falls, while the hard polycarbonate back will protect your phone from scratches.

The classic, translucent finish will give your smartphone a unique look.

The Magmat also features a magnetic ring compatible with the MagSafe wireless charger for quick and easy charging.

Stylish, modern design and a high level of protection are the hallmarks of the Tech-Protect Magmat XT case. The cover is made of a combination of high-quality materials: a flexible TPU (polyurethane) frame and a hard, polycarbonate back. This combination provides effective protection against drops, shocks and scratches, while maintaining the slim profile of the case.

The transparent finish emphasizes the original look of the smartphone, and the gently raised edges around the camera and screen additionally protect them from damage when in contact with flat surfaces.

The XT model also features colorful, designer button caps that allow you to personalize the case according to your style – the set includes as many as four different color variants to choose from.

The case is equipped with an integrated magnetic ring, making it fully compatible with MagSafe accessories. It allows you to conveniently and safely use a variety of accessories, such as chargers, car holders, wallets or stands – without the need to remove the case.

The Tech-Protect C7S CrossBody strap is an elegant and functional accessory that is perfect for everyday use.

Equipped with an adapter that we place on the inside of the case, it allows you to carry your phone safely and comfortably. Thanks to the adjustable length of the cord, we can hang the phone over our shoulder or carry it in our hand, adapting the way we use it to our needs.

The C7S can be used as a stylish phone lanyard, but it will also be great as an accessory to keys or a backpack, adding a modern look to the whole.

*Two adapters are included.

The Tech-Protect Magring Magsafe case is an excellent choice for those who value functionality combined with elegance. This lightweight and perfectly fitting case is made of PC, TPU and a sleek aluminum frame that wraps around the edges of the camera, providing effective protection against damage.

The key element of the case is a movable ring that can be rotated 360 degrees, which allows it to be used in various ways – as a stand for comfortable watching movies, as a finger holder for a more secure hold of the phone, and as an element that supports the MagSafe function. Thanks to its MagSafe properties, it works perfectly with MagSafe accessories, such as chargers or magnetic holders.

Tech-Protect Magring Magsafe is a stylish and perfectly crafted product that not only protects your phone, but also adds a modern look to it. This is a practical solution that will certainly meet the expectations of even the most demanding users.

The Tech-Protect C7S CrossBody strap is an elegant and functional accessory that is perfect for everyday use.

Equipped with an adapter that we place on the inside of the case, it allows you to carry your phone safely and comfortably. Thanks to the adjustable length of the cord, we can hang the phone over our shoulder or carry it in our hand, adapting the way we use it to our needs.

The C7S can be used as a stylish phone lanyard, but it will also be great as an accessory to keys or a backpack, adding a modern look to the whole.

*Two adapters are included.

Tech-Protect Glass Flex+ is a revolutionary hybrid glass that provides maximum screen protection without compromise. The ultra-thin design with a thickness of only 0.28 mm makes it virtually invisible and at the same time extremely durable. With a ceramic coating with a hardness of 7H, it effectively protects against scratches and pressure, maintaining perfect clarity and full sensitivity to touch. The biggest advantage? It doesn't crack or crumble like traditional tempered glass!

Tech-Protect Glass Flex+ is the perfect solution for those who value complete safety without compromise.

A classic, one-piece Flexair Hybrid Magsafe case from Tech-Protect with a transparent finish, created to emphasize the lines and original silhouette of the device.
The hybrid construction is a combination of a rigid polycarbonate back and a durable, flexible frame around it. The whole will provide excellent protection against scratches and damage, while maintaining a slim and light design.

The perfectly fitted case fits snugly to the device, increasing the comfort of its use, and precisely made notches do not limit the functionality - free access to buttons and ports. The slightly raised form of the case around the camera and screen will protect against scratches, lifting the phone just above a flat surface.

The case is equipped with a ring compatible with MagSafe wireless technology.
The magnetic ring will ensure maximum charging performance and a quick and easy connection to all MagSafe accessories.

The Tech-Protect Wallet case made entirely of eco-leather is comfortable and durable to use, and at the same time elegant, in a classic style and original design.

One of the main features of the cover is the stand function, thanks to which the user can freely watch videos, use video calls or view content in landscape mode, without having to hold the phone in his hand. The case provides a stable support for the phone, which increases the comfort of use.

In addition, it has a convenient place for documents, credit cards or cash. Thanks to this, you can always have all the most important things with you. A practical and functional solution for people who value convenience and organization.

It is worth noting that the Tech-Protect Wallet case is refined in every detail. The stitching adds a stylish character to it and at the same time enhances its durability. Mounted on a base made of TPU, a flexible but durable material, it protects the phone from accidental falls, scratches and other damage.

The magnetic closure makes closing and opening the case quick and simple, while keeping your phone safe and secure inside.

The Tech-Protect N53 Car Mount is a modern and functional solution that will be perfect for any car. Made of durable nylon, fiber and ABS plastic, it guarantees durability and resistance to damage.

Its versatile design fits most air vents, making it extremely practical and easy to install. Equipped with as many as 17 N52 magnets, it ensures a stable hold of the device, even during dynamic driving. The elegant black design blends perfectly with the interior of any car, adding a modern character to it.

Thanks to Tech-Protect N53, using navigation, answering calls or playing music becomes convenient and, above all, safe.

The Tech-Protect Icon is a high-quality silicone case that combines style and functionality. Manufactured with care by Tech-Protect, it provides complete protection for your device. The interior covered with delicate microfiber protects the phone from scratches, and the perfectly smooth, soft to the touch surface makes the device fit perfectly in the hand.

The case is designed for a perfect fit – not only does it highlight the sleek design of your phone, but it also gives you full access to all ports and features. Thanks to this, you do not have to give up the convenience of use, and your phone gains effective protection against falls and damage.

Choose Tech-Protect Icon and enjoy stylish protection every day!

Tech-Protect Glass Fit+ tempered glass is a high-quality protective accessory made of lightweight and precisely milled glass with a thickness of only 0.3mm.

The perfectly matched design fully preserves the sensitivity of the touchscreen. The manufacturer rates its hardness level at 9H on a ten-point scale, which translates into exceptional scratch resistance during everyday use.

The glass is characterized by crystal clarity, thanks to which it retains the natural colors and sharpness of the display. An additional advantage is a special oleophobic coating, which effectively minimizes the accumulation of fingerprints and other impurities on the surface of the glass, thus making it easier to keep it clean.

* Due to the various milling of the edges of the displays, after installing the film/protective glass on the screen, a slight air halo may be created around the screen! This is a natural situation and depends on the milling of the screen in a given piece.

INSTALLATION INSTRUCTIONS:
1) Start installation in the bathroom right after bathing - the water vapor will absorb all the dust from the atmosphere and it will not interfere with your installation.
2) Clean and degrease the surface of the screen thoroughly, then use a dry cloth to polish it to a shine.
3) Install the coating as evenly as you can - you can position it with two sheets, gluing them to the side of the device.
4) Get rid of air bubbles by pressing the whole thing down in a circular motion for a few dozen seconds. Do this so that the adhesive layer bonds to the screen as tightly as possible.

Tech-Protect NaturalFit is an elegant and functional case made of high-quality leather that combines style with maximum protection for your headphones. It provides full 360-degree protection, protecting against scratches, bumps, and daily wear and tear.

The case has a visible LED light that allows you to quickly check the charging status, and thanks to the support of both wired and wireless charging, use is convenient and versatile. The inside of the case has been carefully finished with soft microfiber, which gently wraps the headphones, protecting them from scratches and dust.

In addition, the practical 210 mm long lanyard allows you to easily carry the case, ensuring comfort and safety in everyday use. Tech-Protect NaturalFit is a combination of modern design, durability of materials and functionality that perfectly meets the needs of demanding users.

Tech-Protect Glass Fit+ tempered glass is a high-quality protective accessory made of lightweight and precisely milled glass with a thickness of only 0.3mm.

The perfectly matched design fully preserves the sensitivity of the touchscreen. The manufacturer rates its hardness level at 9H on a ten-point scale, which translates into exceptional scratch resistance during everyday use.

The glass is characterized by crystal clarity, thanks to which it retains the natural colors and sharpness of the display. An additional advantage is a special oleophobic coating, which effectively minimizes the accumulation of fingerprints and other impurities on the surface of the glass, thus making it easier to keep it clean.

* Due to the various milling of the edges of the displays, after installing the film/protective glass on the screen, a slight air halo may form around the screen! This is a natural situation and depends on the milling of the screen in a given piece.

INSTALLATION INSTRUCTIONS:
1) Start installation in the bathroom right after bathing - the water vapor will absorb all the dust from the atmosphere and it will not interfere with your installation.
2) Clean and degrease the surface of the screen thoroughly, then use a dry cloth to polish it to a shine.
3) Install the coating as evenly as you can - you can position it with two sheets, gluing them to the side of the device.
4) Get rid of air bubbles by pressing the whole thing down in a circular motion for a few dozen seconds. Do this so that the adhesive layer bonds to the screen as tightly as possible.

The Tech-Protect Wallet case made entirely of eco-leather is comfortable and durable to use, and at the same time elegant, in a classic style and original design.

One of the main features of the cover is the stand function, thanks to which the user can freely watch videos, use video calls or view content in landscape mode, without having to hold the phone in his hand. The case provides a stable support for the phone, which increases the comfort of use.

In addition, it has a convenient place for documents, credit cards or cash. Thanks to this, you can always have all the most important things with you. A practical and functional solution for people who value convenience and organization.

It is worth noting that the Tech-Protect Wallet case is refined in every detail. The stitching adds a stylish character to it and at the same time enhances its durability. Mounted on a base made of TPU, a flexible but durable material, it protects the phone from accidental falls, scratches and other damage.

The magnetic closure makes closing and opening the case quick and simple, while keeping your phone safe and secure inside.

The Tech-Protect C10S Rope is a set of two lanyards made of braided cord – a long crossbody lanyard for carrying the phone over the shoulder and a short wrist lanyard. Both can be combined together to form one longer leash with a total length of 145 cm. Metal elements and a subtle color of the cord give the set an aesthetic, minimalist character.

The included adapter slides under the case – between the case and the phone – and acts as a attachment point for the carabiners of both lanyards. Thanks to this, the set fits any smartphone model and any case, without glue and without modifying the device. Just change the leash depending on the situation – a long crossbody when going out into the city, a short one on the wrist during activity.

The Tech-Protect C5SE CrossBody strap is an elegant and functional accessory that is perfect for everyday use.

Equipped with an adapter that we place on the inside of the case, it allows you to carry your phone safely and comfortably. Thanks to the adjustable length of the cord, we can hang the phone over our shoulder or carry it in our hand, adapting the way we use it to our needs.

C5SE can be used as a stylish phone lanyard, but it will also be great as an addition to keys or a backpack, adding a modern look to the whole.

The Tech-Protect Wallet case made entirely of eco-leather is comfortable and durable to use, and at the same time elegant, in a classic style and original design.

One of the main features of the cover is the stand function, thanks to which the user can freely watch videos, use video calls or view content in landscape mode, without having to hold the phone in his hand. The case provides a stable support for the phone, which increases the comfort of use.

In addition, it has a convenient place for documents, credit cards or cash. Thanks to this, you can always have all the most important things with you. A practical and functional solution for people who value convenience and organization.

It is worth noting that the Tech-Protect Wallet case is refined in every detail. The stitching adds a stylish character to it and at the same time enhances its durability. Mounted on a base made of TPU, a flexible but durable material, it protects the phone from accidental falls, scratches and other damage.

The magnetic closure makes closing and opening the case quick and simple, while keeping your phone safe and secure inside.

The Tech-Protect Rugged Shield MagSafe is a hybrid case that combines a durable flexible TPU frame with a matte polycarbonate back. The design provides maximum protection for your phone, while maintaining easy installation and comfort for everyday use. The integrated MagSafe magnetic ring allows you to quickly and stably attach magnetic accessories and wireless chargers.

Reinforced corners with cushioning technology absorb shocks during falls, protecting your phone in the most vulnerable points. Raised edges around the screen and camera protect against scratches and contact with surfaces when the phone is lying flat. The textured TPU sides provide a non-slip grip and prevent it from slipping out of your hand. Built-in MagSafe magnets ensure compatibility with the entire magnetic accessory ecosystem.

The matte finish on the back is resistant to fingerprints and debris, maintaining an aesthetic appearance for a long time. Precise cutouts allow full access to all ports, buttons and functions of the phone without having to remove the case. The case retains full wireless charging functionality, including MagSafe chargers.

The Tech-Protect FlexAir Hybrid MagSafe is an advanced combination of flexible TPU and hard PC polycarbonate with a built-in magnetic ring for full compatibility with MagSafe accessories. The hybrid design combines flexible sides with a hard back, offering enhanced protection against scratches and stronger impacts. The transparent design allows you to fully appreciate the original appearance of the smartphone, without covering its design.

The built-in magnetic ring allows wireless charging and a stable connection to MagSafe chargers, mounts and wallets without having to remove the case. The magnets hold firmly on the accessories, ensuring a secure hold in any situation. The double-layer structure effectively absorbs impact energy, reducing the risk of damage to your phone in a fall. Raised edges around the screen and camera island protect the display and lenses from contact with flat surfaces.

The FlexAir Hybrid MagSafe is ideal for those looking for enhanced protection with MagSafe functionality. The combination of two materials and magnetic technology guarantees long-term protection and comfort of use of magnetic accessories.

Tech-Protect Glass UV+ is a tempered glass with UV application. The ultraviolet light curing technology makes the glass adhere perfectly to the screen, maintaining full transparency and touch sensitivity. The set includes two lenses and a UV lamp, so your device will be protected from day one.

The glass achieves a hardness of 9H on the Mohs scale, which means effective protection against keys, coins and other items that we carry in our pockets. The thickness of 0.3 mm maintains the slim profile of your smartphone and does not affect the responsiveness of the touchscreen. The material absorbs impact energy, protecting the display from cracks even when falling from a height. Thanks to UV technology, the glass also covers the curved edges of the screen, eliminating the formation of air bubbles.

The oleophobic coating reduces the visibility of fingerprints and makes it easier to clean the surface. The image remains crystal clear with faithful color reproduction, while the smooth surface of the glass maintains the precision of gestures and smooth scrolling. Once mounted, be sure to re-save your fingerprints so that the in-screen reader works optimally with the new protective layer.

* We do not recommend using 3D glass without any case.

** We do not recommend using glass if the case overlaps the edges of the screen too much, there is a risk of prying it open.

The functionality of the fingerprint reader in the screen may be slightly impaired if a foil or glass coating is installed. The fingerprint reader is not fully refined for additional coatings.

The Tech-Protect N61 Magnetic is a modern, magnetic car mount compatible with MagSafe technology. Designed for maximum comfort and safety. It offers quick and secure phone attachment without the need for additional arms or clamps. It is an ideal solution for drivers who value stability, ease of use and elegant design.

The N61 uses a built-in, strong magnetic system that works precisely with MagSafe, ensuring a solid grip on your smartphone even during dynamic driving. The phone remains stable on bumps and under sudden braking, and the ability to freely position it in a vertical or horizontal position makes it easy to use navigation or hands-free. The construction made of durable materials (PC, ABS, TPU and zinc alloy) guarantees resistance to high temperatures and a long service life.

Mounting the mount is quick and intuitive thanks to the sturdy suction cup, which allows it to be firmly attached to both the windshield and the dashboard. The universal mounting system makes the holder easy to move between different vehicles and also use it in other spaces – on the desk, in the kitchen or in the bathroom.

* MagSafe magnetic only works directly with your phone or on a case with a built-in MagSafe magnetic eye.

Tech-Protect Glass Fit+ is a tempered glass that combines protection with aesthetics. Precisely milled edges and minimal thickness make the glass almost disappear on the screen, while maintaining full touch sensitivity.

The 9H hardness on a ten-point scale means that the glass can withstand contact with keys, coins and other sharp objects that you carry in your pocket every day. The thickness of only 0.3 mm practically does not change the profile of your smartphone and does not affect the responsiveness of the screen. The hardened material dissipates the force of the impact, protecting the display from cracks during falls.

The oleophobic coating minimizes the accumulation of fingerprints and makes it easier to keep the glass clean. Crystal clarity preserves natural colors and image sharpness without affecting the quality of the display. The glass design ensures compatibility with most available cases, so you can freely personalize the look of your phone.

The Tech-Protect Hydro flex+ hydrogel film is a modern screen protector that combines flexibility and durability. Made of high-quality TPU plastic, it perfectly adapts to any surface of the screen, including its curved edges.

The most important advantage of Hydro flex+ is the comprehensive protection of the screen against mechanical damage during everyday use. The film has innovative self-healing properties that allow for self-smoothing of minor scratches caused during the operation of the device. Despite its advanced protection, the film maintains full optical clarity, ensuring faithful reproduction of the colors of the display and unchanged sensitivity of the touchscreen.

Thanks to the flexibility of the TPU material, the installation of the film is simple and intuitive, and the end result guarantees almost invisible protection that does not affect the aesthetics or functionality of the smartphone.