Tech-Protect - Seite 38

Tech-Protect Glass Fit+ tempered glass is a high-quality protective accessory made of lightweight and precisely milled glass with a thickness of only 0.3mm.

The perfectly matched design fully preserves the sensitivity of the touchscreen. The manufacturer rates its hardness level at 9H on a ten-point scale, which translates into exceptional scratch resistance during everyday use.

The glass is characterized by crystal clarity, thanks to which it retains the natural colors and sharpness of the display. An additional advantage is a special oleophobic coating, which effectively minimizes the accumulation of fingerprints and other impurities on the surface of the glass, thus making it easier to keep it clean.

* Due to the various milling of the edges of the displays, after installing the film/protective glass on the screen, a slight air halo may form around the screen! This is a natural situation and depends on the milling of the screen in a given piece.

INSTALLATION INSTRUCTIONS:
1) Start installation in the bathroom right after bathing - the water vapor will absorb all the dust from the atmosphere and it will not interfere with your installation.
2) Clean and degrease the surface of the screen thoroughly, then use a dry cloth to polish it to a shine.
3) Install the coating as evenly as you can - you can position it with two sheets, gluing them to the side of the device.
4) Get rid of air bubbles by pressing the whole thing down in a circular motion for a few dozen seconds. Do this so that the adhesive layer bonds to the screen as tightly as possible.

A classic one-piece Flexair Hybrid case from Tech-Protect with a transparent finish, created to emphasize the lines and original silhouette of the device.
The hybrid construction is a combination of a rigid polycarbonate back and a durable, flexible frame around it. The whole will provide excellent protection against scratches and damage, while maintaining a slim and light design.

The perfectly fitted case fits snugly to the device, increasing the comfort of its use, and precisely made notches do not limit the functionality - free access to buttons and ports. The slightly raised form of the case around the camera and screen will protect against scratches, lifting the phone just above a flat surface.

The case is equipped with a ring compatible with MagSafe wireless technology.
The magnetic ring will ensure maximum charging performance and a quick and easy connection to all MagSafe accessories.

Tech-Protect Camfull Fit+ is a high-quality camera cover made of hybrid glass. It provides comprehensive protection of your smartphone's lenses against scratches, mechanical damage and everyday dirt, while maintaining the elegant appearance of the device.

Hybrid glass combines the advantages of tempered hard glass with the flexibility of polymers, creating a robust protective barrier against impact and contact with various surfaces. The cover covers each lens, protecting it from scratches from keys, sand, coins, and other sharp objects. Thanks to its precise workmanship and slim design, it does not affect the operation of the camera, and the quality of photos and videos is the same as without the cover.

Installing the Camfull Fit+ is simple and intuitive – the precise fit ensures perfect alignment with the camera module. Once installed, the cover holds stably for a long time, does not peel off and does not move during daily use. It's a reliable solution for anyone who wants to maintain the perfect condition of their camera without compromising on functionality and aesthetics.

The Tech-Protect FlexAir Hybrid MagSafe is an advanced combination of flexible TPU and hard PC polycarbonate with a built-in magnetic ring for full compatibility with MagSafe accessories. The hybrid design combines flexible sides with a hard back, offering enhanced protection against scratches and stronger impacts. The transparent design allows you to fully appreciate the original appearance of the smartphone, without covering its design.

The built-in magnetic ring allows wireless charging and a stable connection to MagSafe chargers, mounts and wallets without having to remove the case. The magnets hold firmly on the accessories, ensuring a secure hold in any situation. The double-layer structure effectively absorbs impact energy, reducing the risk of damage to your phone in a fall. Raised edges around the screen and camera island protect the display and lenses from contact with flat surfaces.

The FlexAir Hybrid MagSafe is ideal for those looking for enhanced protection with MagSafe functionality. The combination of two materials and magnetic technology guarantees long-term protection and comfort of use of magnetic accessories.

The Tech-Protect FlexAir Hybrid MagSafe is an advanced combination of flexible TPU and hard PC polycarbonate with a built-in magnetic ring for full compatibility with MagSafe accessories. The hybrid design combines flexible sides with a hard back, offering enhanced protection against scratches and stronger impacts. The transparent design allows you to fully appreciate the original appearance of the smartphone, without covering its design.

The built-in magnetic ring allows you to connect wirelessly to MagSafe mounts and wallets without having to remove the case. The magnets hold firmly on the accessories, ensuring a secure hold in any situation. The double-layer structure effectively absorbs impact energy, reducing the risk of damage to your phone in a fall. Raised edges around the screen and camera island protect the display and lenses from contact with flat surfaces.

The FlexAir Hybrid MagSafe is ideal for those looking for enhanced protection with MagSafe functionality. The combination of two materials and magnetic technology guarantees long-term protection and comfort of use of magnetic accessories.

Rubber strap dedicated to Samsung Galaxy Watch. Crafted with attention to detail in TPU material with an extremely pleasant finish.
The product is fully functional and can be adjusted according to individual needs.

The manufacturer has taken care of the details and prepared a top-class product.

Our accessories are perfectly matched and fully compatible with: Samsung Galaxy Watch 4 / 5 / 5 Pro / 6 / 7 / FE (40 / 42 / 43 / 44 / 45 / 46 / 47 mm).

Tech-Protect's classic one-piece Flexair Hybrid CC Magsafe case with a transparent finish, created to emphasize the lines and original silhouette of the device.
The hybrid construction is a combination of a rigid polycarbonate back and a durable, flexible frame around it. The whole will provide excellent protection against scratches and damage, while maintaining a slim and light design.

The perfectly fitted case fits snugly to the device, increasing the comfort of its use, and precisely made notches do not limit the functionality - free access to buttons and ports. The slightly raised form of the case around the camera and screen will protect against scratches, lifting the phone just above a flat surface.

The Flexair Hybrid CC Magsafe has a specially designed protection button that works seamlessly with the camera's control function. The button cover is touch-sensitive, so it provides excellent responsiveness while maintaining full functionality.

The case is equipped with a ring compatible with MagSafe wireless technology.
The magnetic ring will ensure maximum charging performance and a quick and easy connection to all MagSafe accessories.

Stylish and simple design and a high level of protection are synonymous with the new MagCam case from the Tech-Protect brand. High-quality TPU and PC components were used to produce the cover. The flexible frame made of polyurethane will perfectly protect against shocks and falls, while the hard polycarbonate back will protect your phone from scratches.

The built-in magnetic ring, compatible with MagSafe accessories, gives you the ability to wirelessly recharge your energy without having to remove the case from your phone. Now you can use charging anytime, anywhere, without any obstacles.

The transparent finish and metal buttons will ensure a unique look of your phone.
The case is equipped with a camera cover, with precisely made cutouts for the camera, lamp and sensors.

Stylish and simple design and a high level of protection are synonymous with the new Magmat case from the Tech-Protect brand. High-quality TPU and PC components were used to produce the cover. The flexible frame made of polyurethane will perfectly protect against shocks and falls, while the hard polycarbonate back will protect your phone from scratches.

The classic, transparent finish will ensure the unique look of your smartphone.

Stylish and simple design and a high level of protection are synonymous with the new TP Matt case. High-quality TPU and PC components were used to produce the cover. The flexible frame made of polyurethane plastic will perfectly protect against shocks and falls, while the hard polycarbonate back will protect your phone from scratches.

The classic, transparent finish will ensure the unique look of your smartphone.
The slightly raised form of the case around the camera and screen protects against damage by lifting the phone just above a flat surface.

TP Matt also features a magnetic ring compatible with the MagSafe wireless charger for quick and easy charging.

The FlexAir case from Tech-Protect is a perfect combination of flexibility, durability, and ergonomic design. This lightweight case is made of durable TPU material that effectively protects your device from scratches and minor damage.

The case fits your device perfectly, without restricting access to external ports or functions. The flexible material also provides a secure grip, minimizing the risk of accidental drops.

The FlexAir case is the perfect solution for those who value comfort combined with reliable protection. Thanks to its abrasion-resistant properties, the case will maintain its attractive appearance for a long time while protecting your device from everyday damage.

Stylish and simple design and a high level of protection are synonymous with the new Magmat case from the Tech-Protect brand. High-quality TPU and PC components were used to produce the cover. The flexible frame made of polyurethane will perfectly protect against shocks and falls, while the hard polycarbonate back will protect your phone from scratches.

The classic, transparent finish will ensure the unique look of your smartphone.

Stylish and simple design and a high level of protection are synonymous with the new Magmat case from the Tech-Protect brand. High-quality TPU and PC components were used to produce the cover. The flexible frame made of polyurethane will perfectly protect against shocks and falls, while the hard polycarbonate back will protect your phone from scratches.

The classic, transparent finish will ensure the unique look of your smartphone.

The Tech-Protect BasicMag MagSafe case combines minimalist design with effective protection. The slim, double-layer design with a flexible TPU frame and hard polycarbonate back protects the device from shocks, drops, and scratches while remaining lightweight and comfortable for daily use.

The matte finish adds elegance and does not collect fingerprints, while the perfect fit gives you full access to the buttons and ports. The built-in magnetic ring ensures full MagSafe compatibility, allowing you to quickly charge and use accessories without having to remove the case.

The raised edges around the screen and camera additionally protect the sensitive components of the smartphone when in contact with flat surfaces. This case is the perfect choice for people who want to combine reliable protection, a modern look and the convenience of everyday use.

The Tech-Protect Lamano MagSafe case is a stylish and functional accessory made of high-quality PC plastic, which effectively protects the phone from scratches and damage. Featuring a raised bezel around the lens, it provides excellent protection for the camera against abrasions and accidental impacts.

It's a claw case that attracts attention with its modern design and character – perfect for women who value elegance combined with a touch of predatory style. The slim and lightweight design perfectly adapts to the shape of the phone, guaranteeing a comfortable grip and comfort of everyday use.

With full MagSafe compatibility, the case allows for fast and convenient wireless charging and hassle-free use of magnetic accessories. Tech-Protect Lamano MagSafe is not only protection, but also a fashionable accessory that will be perfect as a gift for people who like to stand out with style.

Tech-Protect Glass Fit+ is a tempered glass that combines protection with aesthetics. Precisely milled edges and minimal thickness make the glass almost disappear on the screen, while maintaining full touch sensitivity.

The 9H hardness on a ten-point scale means that the glass can withstand contact with keys, coins and other sharp objects that you carry in your pocket every day. The thickness of only 0.3 mm practically does not change the profile and does not affect the responsiveness of the screen. The hardened material dissipates the force of the impact, protecting the display from cracks during falls.

The oleophobic coating minimizes the accumulation of fingerprints and makes it easier to keep the glass clean. Crystal clarity preserves natural colors and image sharpness without affecting the quality of the display.

Tech-Protect Easy Set+, i.e. the tempered coating for the display, is made of light and milled glass with a thickness of 0.3mm and a hardness of 9H. The crystal clear glass ensures image clarity, perfect reproduction of color saturation and does not disturb the sensitivity of touch. In addition, it is covered with a high-quality oleophobic coating, which minimizes the amount of fingerprints or other impurities left.

Protective lens cap made of high-quality tempered glass with a hardness of 9H. Precisely cut, it provides protection against scratches and breakage.

The set includes installation accessories along with a positioning frame, thanks to which installation is very easy and accessible to literally everyone.

How to check if a particular accessory fits your iPad?
It's simple, check the back of the device for the model number that starts with the letter A:
The product in this range fits for: A2696, A2757, A2777, A3354, A3355, A3356.

INSTALLATION INSTRUCTIONS:
1) Start installation in the bathroom right after bathing - the water vapor will absorb all the dust from the atmosphere and it will not interfere with your installation.
2) Clean and degrease the surface of the screen thoroughly, then use a dry cloth to polish it to a shine.
3) Install the shell as evenly as you can - you can position it with the help of the positioning frame from the kit.
4) Get rid of air bubbles by pressing the whole thing down in a circular motion for a few dozen seconds. Do this so that the adhesive layer bonds to the screen as tightly as possible.

The Tech-Protect Iconband sports strap made of high-quality, flexible TPU will be perfect as a complement to any styling.
The strap is fully functional, it can be adjusted according to individual needs.

The Iconband is equipped with the Quick Fit fastening system - this solution makes changing the strap very quick and simple.

The Tech-Protect Iconband sports strap made of high-quality, flexible TPU will be perfect as a complement to any styling.
The strap is fully functional, it can be adjusted according to individual needs.

The Iconband is equipped with the Quick Fit fastening system - this solution makes changing the strap very quick and simple.

The FlexAir case offered by Tech-Protect is the perfect combination of flexibility, durability and ergonomic design. Lightweight case, made of durable TPU plastic, which effectively protects your device from scratches and minor damage.

The case fits perfectly into your device without restricting access to external ports or functions. The flexible material also provides a secure grip, which minimizes the risk of accidental drops of the device.

The FlexAir case is the perfect solution for people who value comfort of use combined with reliable protection. Thanks to its anti-abrasion properties, the case will maintain an attractive appearance for a long time while protecting your equipment from everyday damage.

The Tech-Protect Icon is a high-quality silicone case that combines style and functionality. Manufactured with care by Tech-Protect, it provides complete protection for your device. The interior covered with delicate microfiber protects the phone from scratches, and the perfectly smooth, soft to the touch surface makes the device fit perfectly in the hand.

The case is designed for a perfect fit – not only does it highlight the sleek design of your phone, but it also gives you full access to all ports and features. Thanks to this, you do not have to give up the convenience of use, and your phone gains effective protection against falls and damage.

Choose Tech-Protect Icon and enjoy stylish protection every day!

Slim and light case with built-in glass designed to fit perfectly on your Huawei Watch.
Defense360 from Tech-Protect is a stylish way to fully protect your Watch.

The integrated tempered glass does not affect the touch sensitivity or the quality of the displayed image.
During installation, degrease the screen surfaces with an alcohol-based liquid.

A classic one-piece Flexair Hybrid case from Tech-Protect with a transparent finish, created to emphasize the lines and original silhouette of the device.
The hybrid construction is a combination of a rigid polycarbonate back and a durable, flexible frame around it. The whole will provide excellent protection against scratches and damage, while maintaining a slim and light design.

The perfectly fitted case fits snugly to the device, increasing the comfort of its use, and precisely made notches do not limit the functionality - free access to buttons and ports. The slightly raised form of the case around the camera and screen will protect against scratches, lifting the phone just above a flat surface.

A classic one-piece Flexair Hybrid case from Tech-Protect with a transparent finish, created to emphasize the lines and original silhouette of the device.
The hybrid construction is a combination of a rigid polycarbonate back and a durable, flexible frame around it. The whole will provide excellent protection against scratches and damage, while maintaining a slim and light design.

The perfectly fitted case fits snugly to the device, increasing the comfort of its use, and precisely made notches do not limit the functionality - free access to buttons and ports. The slightly raised form of the case around the camera and screen will protect against scratches, lifting the phone just above a flat surface.

The C30W universal mains charger is the ability to quickly and, above all, safely renew energy in devices such as smartphones, portable consoles, power banks or tablets.

Equipped with USB-C (PD30W) and USB-A (QC3.0) power ports, it allows you to charge two devices at the same time.
The Quick Charge and Power Delivery technologies minimize charging time by instantly increasing the power of the devices, and the safety systems protect the device from harmful overloads.

The accessory has an intelligent management system that adjusts the optimal voltage to a specific equipment.
Your device will get exactly the amount of current it needs to recover in the shortest possible time, without the risk of damaging the battery.

Its ultra-lightweight and compact design means it fits in any purse, backpack or suitcase, meaning you can have it with you on every trip.