Salus

Quantum SQ610RF is a new smart room thermostat from SALUS. The appearance of the room thermostat is light and simple in a smart thin design. The room thermostat has a built-in rechargeable lithium battery and should not have any batteries changed. The SQ610RF is wireless and fits with a SALUS floor heating system or SALUS Smart Home system. When connected through SALUS Smart Home it is possible to monitor and change the thermostat settings from either PC, Smart Phone or tablet. SALUS Quantum SQ610RF offers the opportunity to increase comfort and reduce energy consumption.

Smart Home SR600 Built-in Relay allows you to control your electrically connected devices via an app for your smartphone, tablet or PC wherever you are.

Quantum SQ610 is a new smart room thermostat from SALUS. The room thermostat look is light and simple in a smart thin design. The room thermostat must be connected to 230V. The SQ610 can be used freely for either wired systems or connected wirelessly to a SALUS floor heating system / SALUS Smart Home system. When connected through SALUS Smart Home it is possible to monitor and change the thermostat settings from either PC, Smart Phone or tablet. The SALUS Quantum SQ610 offers the opportunity to increase comfort and reduce energy consumption.

The THB23031 is an auto balancing actuator that is used to provide automatic balancing of your underfloor heating circuits. It has two temperature sensors that are connected to the UFH flow and return pipes (inlet and outlet of the UFH manifold). It will continuosly measure the temperatures and adjust the actuator position to maintain the correct temparatur differential between the manifold flow and return pipes (Delta T). This product has an IP54 rating means that the produkt will be protected against contamination from limited amounts of dust and other particles. Additionally, it will be protected from water sprays from all directions. ITG Dresden have confirmed that the Salus THB actuator is equivalent to the hydraulic balancing. In co-operation with ITG Dresden, The Salus THB actuator has been tested and improved. During independent testing it was confirmed that the installation of the Salus THB system in existing underfloor heating system will achieve the same results as a conventional balancing.

230 wireless room thermostat for mounting in wall box, for Salus iT600 Heating System. Colour: White.

Amplifier for Salus iT600 heating system ZigBee signal.

EV-Ladestation mit 11 kW Ladeleistung, 16 A Ladestrom, Mode-3-Laden, 5-m-Typ-2-Ladekabel, Wi-Fi-Verbindung und NFC-Zugangskontrolle.

Salus macht das Laden deines Elektroautos zu Hause einfach, smart und kontrollierbar. Die schlanke Wallbox eignet sich für den Innen- und Außenbereich, lässt sich bequem per App steuern und bietet dir volle Übersicht über Ladezeiten, Verbrauch und Nutzerzugriff.

• Ladeleistung: Bis zu 11 kW Ladepower für effizientes AC-Laden zu Hause
• Ladekabel: Fest integriertes 5-m-Typ-2-Kabel für komfortables Anschließen des Fahrzeugs
• Betrieb: Mode-3-Ladestation mit 16 A Ladestrom für kompatible Elektroautos und Plug-in-Hybride
• App-Steuerung: Laden per Smartphone überwachen, starten und verwalten
• Zeitplanung: Off-Peak-Scheduling für günstigeres Laden außerhalb der Spitzenzeiten
• Zugang: NFC-Zugriffskontrolle für autorisierte Nutzer und sichere Freigabe
• Installation: Schlankes Design für Innen- und Außenbereiche, ideal für private Wohnumgebungen

Salus 24V NC actuator for underfloor heating with 30mm nut, can be used for all 24V underfloor heating systems.

230 wireless 8 zone control box for Salus iT600 underfloor heating system.

Pre-paired set for 1 circuit underfloor heating incl. Quantum thermostat.

Pump with 6 m lifting height and dimensions 180 mm.The pump is A + rated, that is, power consumption is minimal.

Salus sensor in a sleek and smart design for Salus Smart Home. Can be used to turn off thermostats, send messages or turn on lights when doors or windows are opened.Easy to discover on the app if doors and windows are closed before driving from home.

Quantum SQ610BRF is a new smart room thermostat from SALUS. The room thermostat is black and has a smart, smart, thin design. The room thermostat has a built-in lithium battery that can be recharged, and the battery does not need to be changed. The SQ610BRF is wireless and fits together with a SALUS floor heating system or SALUS Smart Home system.

230V Wireless 4-zone expansion box for Salus iT600 Underfloor heating system.

A mounting box in a nice and timeless design. If it is not possible to build Salus Smart relay into the wall, the mounting box can be used to mount Salus Smart relay on the wall.

SALUS GVU is a complete floor heating shunt solution for underfloor heating with underfloor heating manifold, shunt and circulation pump built together in one unit.Our circulation pump is a 6m pump with capacity up to 16 zones. The underfloor heating manifold is a high flow manifold with manual balancing of each circuit. Each valve has a built-in manual flow control which is very easy to adjust. Instructions on how to balance the circuit can be found in the distributor box.The SALUS GVM floor heating manifold has a manual vent on each pipe and a drain valve with 1/2 ”thread for hose. The Inlet thermostat has a temperature setting of 20 to 55 degrees Celsius. Manifold pipe connection is 1 ", and connection to water for the heat supply is 3/4" socket, and threads to the actuator are 30 x 1.5 mm.

Salus under floor heating system paired and ready for use - 4 zones.

Salus under floor heating system paired and ready for use - 6 zones.

Programmable APP-controlled plug for Salus Smart Home. Can be set to schedule, or for example to turn off the elradiator when the window opens v.h.a. window sensor.

Wireless actuator for radiator valve with 30mm nut and adapter for RA valve for Salus iT600 heating system

Wireless Thermostat with knob

SalusApp Controlled Room Thermostat. The thermostat is without display, which gives it a sleek and elegant design, but it still has all the possibilities for controlling the heat in the room, both for underfloor heating, radiator control and electric heating. This thermostat is a solution for anyone who wants to avoid manual control of the room thermostat and who will keep the full control from mobile phone, tablet or computer.

Salus EP Electronic A-class circulation pump for heating systems and other non-corrosive liquids, ensuring high comfort and low energy consumption.The EP circulation pump is mainly used for water circulation in home heating, and is best suited for the following system:• Stable heating system with variable flow• Heating system with variable pipeline temperature• Industrial circulation system• House and apartment heating systemsThe EP circulation pump can adjust the electric pump's performance automatically and continuously to meet the actual needs of the systemThe EP circulation pump is equipped with a control panel on the front, which is convenient for users. Easy installation and startupEP circulation pump has automatic adaptation mode AUTO (factory setting). In most cases, you can start the pump without making any adjustments and let it automatically adjust to meet the actual needs of the system. High comfortThe operating noise of the pump is low. Low energy consumptionCompared to the conventional circulation pump, its energy consumption is very low. The minimum energy consumption for the EP circulation pump can reach 5 W.EP circulation pump does not need external motor protection. Check whether the voltage and frequency of the power supply correspond to the parameters indicated on the pump nameplate. Use the pump's corresponding connector to connect the power supply (EPPLUG).

The WLS600 leak detector can detect if water occurs and thus connect the sensors to the sensor. The WLS600 must be connected to the Salus Smart Home App via the UGE600 Gateway, thereby allowing you to receive an SMS or mail if water is detected under the sensors. The WLS600 can be set via the app to work together with a Smart Relay or Smart Plug, which can possibly close a valve. 2 meter sensor cable included.

SALUS GVM-F underfloor heating manifold is a high flow manifold with manual balancing of each circuit.Each zone valve has on the flow pipe a flow meter that can be used for balancing. Alternatively, the built-in manual flow control integrated into the return valve on the return pipe can be used for balancing. Instructions on how to balance the circuit can be found in the distributor box.SALUS GVM-F underfloor heating distributor has a manual vent on each pipe and a drain valve with 1/2 ”thread for hose. Inlet and return pipe connection is 1 ”thread, and the actuator thread is 30 x 1.5 mmContains:Stainless steel manifold set with flow meterEuroconus set for 20 mm PEXVentilation valve on inlet and returnSwivel filling and drain valveMounting brackets for wall mountingWith individual room temperature control. SALUS GVM-F benefits are available with SALUS - wireless control.Properties:Available with SALUS insulation in form-stable EPPComplies with the installation requirements for insulation standard DS 452.Ready for wall mounting.Can be used with water / glycol mixtures with a mixing ratio of up to 30%.Euroconus are included for all inlets and outlets for 20 mm PEX / PE-RT pipe.• Can be integrated into the SALUS Smart Home solution.Can be operated directly from the room thermostat or from the mobile phone, tablet or computer.Benefits are made of stainless steel alloy AISI304 L Premium quality and extruded in dimension1 ”, for optimal distribution and minimum pressure drop.Maximum working pressure: 6 BarMaximum test pressure: 10 bar