Huawei Freebuds SE4 - White
HUAWEI FreeBuds SE 4 ANC are TWS Bluetooth in-ear earphones with a light and airy fit.
The earphones support Bluetooth and can be connected to other Bluetooth devices (such as phones, tablets and computers) for voice calls or music playback.
Thanks to high energy efficiency, the earphones provide up to 10 hours of battery life on a full charge and up to 50 hours of battery life with the charging case. In addition, a powerful 10 mm dynamic driver delivers balanced sound across the entire frequency range. The multimodal ANC technology effectively reduces ambient noise in various scenarios for a more immersive listening experience, and the three microphones ensure clear calls through precise directional voice capture.
1. Charge once, listen all week
HUAWEI FreeBuds SE 4 ANC features a low-power consumption chip platform solution. Compared to the FreeBuds SE 3, it offers 5% better power efficiency and charges 6% faster. This allows for up to 10 hours of music playback on a full charge, and up to 50 hours when charged multiple times with the charging case.* Even if you listen for 7 hours a day, you can use them for a full week before needing to recharge.
*Battery life data comes from Huawei labs. During the tests, audio was played at 50% volume level and with ANC disabled in AAC mode, with HUAWEI Pura 70 phones. The default settings were used for other features. Actual battery life may vary depending on the volume, audio source, environmental interference, product features, and usage habits.
Battery life data is as follows (from Huawei labs)
Scenario Battery Life (Hours)
Playback 10 hours on a full charge, and 50 hours when charged multiple times with the charging case
Playback with ANC enabled 7 hours on a full charge, and 35 hours when charged multiple times with the charging case
Calling 6 hours on a full charge, and 30 hours when charged multiple times with the charging case
Calling with ANC enabled 5 hours on a full charge, and 25 hours when charged multiple times with the charging case
2. Multi-mode ANC
HUAWEI FreeBuds SE 4 ANC is equipped with two microphones positioned inside and outside the ear when worn, which not only detect external noise, but also pick up the extra noise in the ear canal. It then uses this information to accurately generate noise-canceling sound waves, providing up to 24 dB average full-range noise cancellation depth (50 Hz to 16 kHz). It also adaptively adjusts the noise cancellation parameters based on the noise level of the external environment and the wearing status of the earbuds, providing an optimal personalized noise cancellation experience. When using the earbuds, feel free to choose between Ultra, General, and Cozy noise cancellation modes via the app, to adapt the effects to the environment, such as noisy environments, outdoor streets, and quite indoor environments.
*You can download HUAWEI AI Life/HUAWEI Audio Connect from HUAWEI AppGallery/App Store.
3. Balanced, subtle sound across all frequencies
HUAWEI FreeBuds SE 4 ANC is equipped with a 10 mm dynamic driver unit in its compact body. Together with the polymer composite diaphragm, it delivers more powerful amplitude than the HUAWEI FreeBuds SE 3 to provide balanced sound across all frequencies and clear human voices, making it an excellent choice for playing pop music. Thanks to its independent rear cavity design, the outstanding dynamic response range and frequency response capability ensure a consistent and true-to-life audio experience.
4. Multi-EQ modes and EQ custom
Thanks to meticulous fine-tuning by Huawei's audio team, the earbuds support multi-EQ adjustment, offering Bass boost, Treble boost, and Voice modes that meet your every need. At the same time, the custom equalizer supports free adjustments of 10-band EQ, enabling you to play and create your personalized listening style.
5. Precise sound pickup for clear calls
The earbuds also feature a third microphone positioned outside the ear when worn, working alongside the existing two microphones—one inside and one outside the ear—to form a 3-mic call design. This design uses the beamforming technology to accurately pick up your voice, reduce ambient noise, and effectively locate the human voice, so as to enable the other party to hear your voice clearly even you are in an outdoor environment.
6. Touch controls for easy interactions
Double-tap:
Default settings:
(1) When not in a call: Play/Pause. The left and right earbuds can be set separately.
(2) When in a call: Answer/End the call. The left and right earbuds share the same feature.
Optional settings:
(1) When not in a call: Play/Pause, wake up the voice assistant, play the previous/next track, or none (when the touch control feature is disabled). The left and right earbuds can be set separately.
(2) When in a call: Answer/End the call, or none (when the touch control feature is disabled). The left and right earbuds share the same feature.
Triple-tap:
Default settings:
(1) Play the next track. The left and right earbuds can be set separately.
Optional settings:
(1) Play the next/previous track, or none (when the touch control feature is disabled). The left and right earbuds can be set separately.
Touch and hold:
Touch and hold the touch control area for 2 seconds.
Default settings:
(1) When not in a call: Control noise cancellation modes, that is, switch between Noise canceling, Awareness, and Off modes. The left and right earbuds can be set separately.
(2) When receiving an incoming call: Reject the call. The left and right earbuds share the same feature.
Optional settings:
(1) Control noise cancellation modes, that is, switch between Noise canceling, Awareness, and Off modes (at least two). The setting takes effect on both earbuds simultaneously.
(2) When not in a call: Control noise cancellation modes, wake up the voice assistant, adjust the volume, or none. The left and right earbuds can be set separately.
(3) When receiving an incoming call: Reject the call, or none. The left and right earbuds share the same feature.
7. Proximity pairing prompt
The earbuds will automatically enter Pairing mode when you open the charging case for the first time. Your phone will automatically detect the earbuds and display a pairing prompt. After the connection is successful, the battery levels of the earbuds and charging case will be displayed.
*The pairing prompt is available on Huawei smartphones running EMUI 10.0/HarmonyOS 2.0 or later.
8. IP54 dust- and water-resistance
The earbuds are IP54 dust- and water-resistant.
*IP54 dust- and water-resistance is only applicable to the earbuds, not the charging case.
This device is splash, dust, and water resistant in normal conditions. It was tested under controlled lab conditions and got an approved rating of IP54 under IEC standard 60529.
Splash, water, and dust resistance are not permanent conditions and resistance may decrease over time with normal use. Avoid charging the device in damp environments.Liquid damage is not covered under the warranty.
9. Low-latency gaming
HUAWEI FreeBuds SE 4 ANC supports a minimum latency of 130 ms for game playing.
*Data comes from Huawei lab tests using a HUAWEI Pura 70. The data includes the latency of the game, phone, and earbuds. Actual latency may vary depending on the phone model, system version, game type, game version, and other factors.
10. Broadly compatible
Compatible with iOS and Android.
Leistungen
Anschlüsse und Schnittstellen
Kopfhörer
Mikrofon
Akku/Batterie
Betriebsbedingungen
Gewicht und Abmessungen
Verpackungsdaten
Lieferumfang
Energie
Die genannten Informationen und Spezifikationen können vom Hersteller jederzeit und ohne vorherige Ankündigung geändert werden. Die Herstellerabbildungen dienen ausschließlich der Veranschaulichung. Irrtümer und Schreibfehler bleiben vorbehalten. Deutsche Bedienungsanleitungen sind in einigen Fällen ausschließlich digital verfügbar und nicht Bestandteil des Lieferumfangs. Teile des Textes wurden möglicherweise automatisiert erstellt oder maschinell übersetzt und können daher in Einzelfällen missverständlich sein.