Tech-Protect Handys - Schutzfolie - Seite 7

Tech-Protect Glass Fit+ tempered glass is a high-quality protective accessory made of lightweight and precisely milled glass with a thickness of only 0.3mm.

The perfectly matched design fully preserves the sensitivity of the touchscreen. The manufacturer rates its hardness level at 9H on a ten-point scale, which translates into exceptional scratch resistance during everyday use.

The glass is characterized by crystal clarity, thanks to which it retains the natural colors and sharpness of the display. An additional advantage is a special oleophobic coating, which effectively minimizes the accumulation of fingerprints and other impurities on the surface of the glass, thus making it easier to keep it clean.

* The glass is compatible with most cases available on the market.
** Due to the variety of milling of the edges of the displays, a slight halo of air may form around the screen after the film/protective glass is installed on the screen! This is a natural situation and depends on the milling of the screen in a given piece.

INSTALLATION INSTRUCTIONS:
1) Start installation in the bathroom right after bathing - the water vapor will absorb all the dust from the atmosphere and it will not interfere with your installation.
2) Clean and degrease the surface of the screen thoroughly, then use a dry cloth to polish it to a shine.
3) Install the coating as evenly as you can - you can position it with two sheets, gluing them to the side of the device.
4) Get rid of air bubbles by pressing the whole thing down in a circular motion for a few dozen seconds. Do this so that the adhesive layer bonds to the screen as tightly as possible.

Tech-Protect Anti Spy Glass Pro+ is a perfect solution for users who value the privacy and security of their data. The privacy technology used limits the visibility of the screen to outsiders, protecting against unauthorized access, which contributes to increasing the confidentiality of our conversations and messages.

Tech-Protect Anti Spy Glass Pro+ also provides excellent protection for the display against scratches, bumps, and dents, ensuring that your phone stays in top condition for a long time. Its hardness level is rated by the manufacturer at 9H on a ten-point scale. It does not affect the touch sensitivity and saturation of the displayed colors. In addition, it is covered with a high-quality oleophobic coating, which minimizes the number of fingerprints left.

It is also worth noting the incredible smoothness of the touch, which affects the comfort of using the phone.
In addition, the easy installation procedure makes it affordable for anyone, even those who are inexperienced in glass installation.

* Remember to remove and re-add fingerprints after installing the glass, if any.
** Due to the variety of milling of the edges of the displays, after the installation of any glass, a delicate air halo "may" form around the screen. This condition results from the very milling of the screen in a given piece.

Check how easy it is:

INSTALLATION INSTRUCTIONS:
1) Start installation in the bathroom right after bathing - the water vapor will absorb all the dust from the atmosphere and it will not interfere with your installation.
2) Clean and degrease the surface of the screen thoroughly, then use a dry cloth to polish it to a shine.
3) Install the coating as evenly as you can - you can position it with two sheets, gluing them to the side of the device.
4) Get rid of air bubbles by pressing the whole thing down in a circular motion for a few dozen seconds. Do this so that the adhesive layer bonds to the screen as tightly as possible.

Tech-Protect Glass Fit+ is a tempered glass that combines protection with aesthetics. Precisely milled edges and minimal thickness make the glass almost disappear on the screen, while maintaining full touch sensitivity.

The 9H hardness on a ten-point scale means that the glass can withstand contact with keys, coins and other sharp objects that you carry in your pocket every day. With a thickness of just 0.3 mm, it doesn't change the profile of your tablet and doesn't affect the responsiveness of the screen. The hardened material dissipates the force of the impact, protecting the display from cracks during falls.

The oleophobic coating minimizes the accumulation of fingerprints and makes it easier to keep the glass clean. Crystal clarity preserves natural colors and image sharpness without affecting the quality of the display. The glass design ensures compatibility with most available cases, so you can freely personalize the look of your tablet.

Tech-Protect Glass Fit+ tempered glass is a high-quality protective accessory made of lightweight and precisely milled glass with a thickness of only 0.3mm.

The perfectly matched design fully preserves the sensitivity of the touchscreen. The manufacturer rates its hardness level at 9H on a ten-point scale, which translates into exceptional scratch resistance during everyday use.

The glass is characterized by crystal clarity, thanks to which it retains the natural colors and sharpness of the display. An additional advantage is a special oleophobic coating, which effectively minimizes the accumulation of fingerprints and other impurities on the surface of the glass, thus making it easier to keep it clean.

* Due to the various milling of the edges of the displays, after installing the film/protective glass on the screen, a slight air halo may form around the screen! This is a natural situation and depends on the milling of the screen in a given piece.

INSTALLATION INSTRUCTIONS:
1) Start installation in the bathroom right after bathing - the water vapor will absorb all the dust from the atmosphere and it will not interfere with your installation.
2) Clean and degrease the surface of the screen thoroughly, then use a dry cloth to polish it to a shine.
3) Install the coating as evenly as you can - you can position it with two sheets, gluing them to the side of the device.
4) Get rid of air bubbles by pressing the whole thing down in a circular motion for a few dozen seconds. Do this so that the adhesive layer bonds to the screen as tightly as possible.

Tech-Protect Glass Fit+ tempered glass is a high-quality protective accessory made of lightweight and precisely milled glass with a thickness of only 0.3mm.

The perfectly matched design fully preserves the sensitivity of the touchscreen. The manufacturer rates its hardness level at 9H on a ten-point scale, which translates into exceptional scratch resistance during everyday use.

The glass is characterized by crystal clarity, thanks to which it retains the natural colors and sharpness of the display. An additional advantage is a special oleophobic coating, which effectively minimizes the accumulation of fingerprints and other impurities on the surface of the glass, thus making it easier to keep it clean.

* Due to the various milling of the edges of the displays, after installing the film/protective glass on the screen, a slight air halo may form around the screen! This is a natural situation and depends on the milling of the screen in a given piece.

INSTALLATION INSTRUCTIONS:
1) Start installation in the bathroom right after bathing - the water vapor will absorb all the dust from the atmosphere and it will not interfere with your installation.
2) Clean and degrease the surface of the screen thoroughly, then use a dry cloth to polish it to a shine.
3) Install the coating as evenly as you can - you can position it with two sheets, gluing them to the side of the device.
4) Get rid of air bubbles by pressing the whole thing down in a circular motion for a few dozen seconds. Do this so that the adhesive layer bonds to the screen as tightly as possible.

Tech-Protect Glass Fit+ tempered glass is a high-quality protective accessory made of lightweight and precisely milled glass with a thickness of only 0.3mm.

The perfectly matched design fully preserves the sensitivity of the touchscreen. The manufacturer rates its hardness level at 9H on a ten-point scale, which translates into exceptional scratch resistance during everyday use.

The glass is characterized by crystal clarity, thanks to which it retains the natural colors and sharpness of the display. An additional advantage is a special oleophobic coating, which effectively minimizes the accumulation of fingerprints and other impurities on the surface of the glass, thus making it easier to keep it clean.

* Due to the various milling of the edges of the displays, after installing the film/protective glass on the screen, a slight air halo may be created around the screen! This is a natural situation and depends on the milling of the screen in a given piece.

INSTALLATION INSTRUCTIONS:
1) Start installation in the bathroom right after bathing - the water vapor will absorb all the dust from the atmosphere and it will not interfere with your installation.
2) Clean and degrease the surface of the screen thoroughly, then use a dry cloth to polish it to a shine.
3) Install the coating as evenly as you can - you can position it with two sheets, gluing them to the side of the device.
4) Get rid of air bubbles by pressing the whole thing down in a circular motion for a few dozen seconds. Do this so that the adhesive layer bonds to the screen as tightly as possible.

Tech-Protect Glass Fit+ tempered glass is a high-quality protective accessory made of lightweight and precisely milled glass with a thickness of only 0.3mm.

The perfectly matched design fully preserves the sensitivity of the touchscreen. The manufacturer rates its hardness level at 9H on a ten-point scale, which translates into exceptional scratch resistance during everyday use.

The glass is characterized by crystal clarity, thanks to which it retains the natural colors and sharpness of the display. An additional advantage is a special oleophobic coating, which effectively minimizes the accumulation of fingerprints and other impurities on the surface of the glass, thus making it easier to keep it clean.

* The glass is compatible with most cases available on the market.
** Due to the variety of milling of the edges of the displays, a slight halo of air may form around the screen after the film/protective glass is installed on the screen! This is a natural situation and depends on the milling of the screen in a given piece.

INSTALLATION INSTRUCTIONS:
1) Start installation in the bathroom right after bathing - the water vapor will absorb all the dust from the atmosphere and it will not interfere with your installation.
2) Clean and degrease the surface of the screen thoroughly, then use a dry cloth to polish it to a shine.
3) Install the coating as evenly as you can - you can position it with two sheets, gluing them to the side of the device.
4) Get rid of air bubbles by pressing the whole thing down in a circular motion for a few dozen seconds. Do this so that the adhesive layer bonds to the screen as tightly as possible.

Tech-Protect Glass Spy+ is the perfect solution for users who value the privacy and security of their data. The privacy technology used limits the visibility of the screen to outsiders, protecting against unauthorized access, which contributes to increasing the confidentiality of our conversations and messages.

The Tech-Protect Glass Spy+ also provides excellent protection for the display against scratches, bumps, and dents, ensuring that your phone stays in top condition for a long time. Its hardness level is rated by the manufacturer at 9H on a ten-point scale. It does not affect the touch sensitivity and saturation of the displayed colors. In addition, it is covered with a high-quality oleophobic coating, which minimizes the number of fingerprints left.

It is also worth noting the incredible smoothness of the touch, which affects the comfort of using the phone.
In addition, the easy installation procedure makes it affordable for anyone, even those who are inexperienced in glass installation.

* Remember to remove and re-add fingerprints after installing the glass, if any.
** Due to the variety of milling of the edges of the displays, after the installation of any glass, a delicate air halo "may" form around the screen. This condition results from the very milling of the screen in a given piece.

Tech-Protect Glass Fit+ tempered glass is a high-quality protective accessory made of lightweight and precisely milled glass with a thickness of only 0.3mm.

The perfectly matched design fully preserves the sensitivity of the touchscreen. The manufacturer rates its hardness level at 9H on a ten-point scale, which translates into exceptional scratch resistance during everyday use.

The glass is characterized by crystal clarity, thanks to which it retains the natural colors and sharpness of the display. An additional advantage is a special oleophobic coating, which effectively minimizes the accumulation of fingerprints and other impurities on the surface of the glass, thus making it easier to keep it clean.

* Due to the various milling of the edges of the displays, after installing the film/protective glass on the screen, a slight air halo may be created around the screen! This is a natural situation and depends on the milling of the screen in a given piece.

INSTALLATION INSTRUCTIONS:
1) Start installation in the bathroom right after bathing - the water vapor will absorb all the dust from the atmosphere and it will not interfere with your installation.
2) Clean and degrease the surface of the screen thoroughly, then use a dry cloth to polish it to a shine.
3) Install the coating as evenly as you can - you can position it with two sheets, gluing them to the side of the device.
4) Get rid of air bubbles by pressing the whole thing down in a circular motion for a few dozen seconds. Do this so that the adhesive layer bonds to the screen as tightly as possible.

Tech-Protect Glass Flex+ is a revolutionary hybrid glass that provides maximum screen protection without compromise. The ultra-thin design with a thickness of only 0.28 mm makes it virtually invisible and at the same time extremely durable. With a ceramic coating with a hardness of 7H, it effectively protects against scratches and pressure, maintaining perfect clarity and full sensitivity to touch. The biggest advantage? It doesn't crack or crumble like traditional tempered glass!

Tech-Protect Glass Flex+ is the perfect solution for those who value complete safety without compromise.

INSTALLATION INSTRUCTION:
1. The installation of this glass model is different from traditional tempered glass glued to a thin adhesive layer. Due to the thicker layer of glue, the process is a bit more demanding and requires precision.
2. Clean the watch screen thoroughly. Use a damp cloth to remove any dirt and fingerprints. Then wipe the screen with a dry, soft cloth to completely remove moisture. Finally, use dust stickers to get rid of dust and dust particles.
3. Carefully remove the protective film from the adhesive layer. Precisely align the glass with the screen and gently place it.
4. If any of the edges do not adhere properly, it is likely that the glass has been glued unevenly. In this case, they should be peeled off and re-glued until the desired effect is achieved.
5. Remove air bubbles by gently pressing the glass from the center to the edges. Use your finger or a soft cloth to do this, pushing the air out.
6. Due to the specificity of glass production (polishing, milling), the fitting may require several minutes of work. After proper installation, the final result is aesthetic and durable.

Tech-Protect Glass Fit+ tempered glass is a high-quality protective accessory made of lightweight and precisely milled glass with a thickness of only 0.3mm.

The perfectly matched design fully preserves the sensitivity of the touchscreen. The manufacturer rates its hardness level at 9H on a ten-point scale, which translates into exceptional scratch resistance during everyday use.

The glass is characterized by crystal clarity, thanks to which it retains the natural colors and sharpness of the display. An additional advantage is a special oleophobic coating, which effectively minimizes the accumulation of fingerprints and other impurities on the surface of the glass, thus making it easier to keep it clean.

* Due to the various milling of the edges of the displays, after installing the film/protective glass on the screen, a slight air halo may be created around the screen! This is a natural situation and depends on the milling of the screen in a given piece.

INSTALLATION INSTRUCTIONS:
1) Start installation in the bathroom right after bathing - the water vapor will absorb all the dust from the atmosphere and it will not interfere with your installation.
2) Clean and degrease the surface of the screen thoroughly, then use a dry cloth to polish it to a shine.
3) Install the coating as evenly as you can - you can position it with two sheets, gluing them to the side of the device.
4) Get rid of air bubbles by pressing the whole thing down in a circular motion for a few dozen seconds. Do this so that the adhesive layer bonds to the screen as tightly as possible.

Tech-Protect Glass Spy+ is the perfect solution for users who value the privacy and security of their data. The privacy technology used limits the visibility of the screen to outsiders, protecting against unauthorized access, which contributes to increasing the confidentiality of our conversations and messages.

The Tech-Protect Glass Spy+ also provides excellent protection for the display against scratches, bumps, and dents, ensuring that your phone stays in top condition for a long time. Its hardness level is rated by the manufacturer at 9H on a ten-point scale. It does not affect the touch sensitivity and saturation of the displayed colors. In addition, it is covered with a high-quality oleophobic coating, which minimizes the number of fingerprints left.

It is also worth noting the incredible smoothness of the touch, which affects the comfort of using the phone.
In addition, the easy installation procedure makes it affordable for anyone, even those who are inexperienced in glass installation.

* Remember to remove and re-add fingerprints after installing the glass, if any.
** Due to the variety of milling of the edges of the displays, after the installation of any glass, a delicate air halo "may" form around the screen. This condition results from the very milling of the screen in a given piece.

INSTALLATION INSTRUCTIONS:
1) Start installation in the bathroom right after bathing - the water vapor will absorb all the dust from the atmosphere and it will not interfere with your installation.
2) Clean and degrease the surface of the screen thoroughly, then use a dry cloth to polish it to a shine.
3) Install the coating as evenly as you can - you can position it with two sheets, gluing them to the side of the device.
4) Get rid of air bubbles by pressing the whole thing down in a circular motion for a few dozen seconds. Do this so that the adhesive layer bonds to the screen as tightly as possible.

Tech-Protect Glass Fit+ tempered glass is a high-quality protective accessory made of lightweight and precisely milled glass with a thickness of only 0.3mm.

The perfectly matched design fully preserves the sensitivity of the touchscreen. The manufacturer rates its hardness level at 9H on a ten-point scale, which translates into exceptional scratch resistance during everyday use.

The glass is characterized by crystal clarity, thanks to which it retains the natural colors and sharpness of the display. An additional advantage is a special oleophobic coating, which effectively minimizes the accumulation of fingerprints and other impurities on the surface of the glass, thus making it easier to keep it clean.

* Due to the various milling of the edges of the displays, after installing the film/protective glass on the screen, a slight air halo may be created around the screen! This is a natural situation and depends on the milling of the screen in a given piece.

INSTALLATION INSTRUCTIONS:
1) Start installation in the bathroom right after bathing - the water vapor will absorb all the dust from the atmosphere and it will not interfere with your installation.
2) Clean and degrease the surface of the screen thoroughly, then use a dry cloth to polish it to a shine.
3) Install the coating as evenly as you can - you can position it with two sheets, gluing them to the side of the device.
4) Get rid of air bubbles by pressing the whole thing down in a circular motion for a few dozen seconds. Do this so that the adhesive layer bonds to the screen as tightly as possible.

Made of aluminum and glass, the camera lens caps from Tech-Protect Camring Fit+ are a very stylish way to protect this part of the device. The pads provide protection against scratches and breakage.

The set comes with a perfectly cut mounting frame, thanks to which you can position the glass perfectly. The manufacturer has simplified the installation method to such an extent that it is fully intuitive for every user.

Tech-Protect Glass Fit+ tempered glass is a high-quality protective accessory made of lightweight and precisely milled glass with a thickness of only 0.3mm.

The perfectly matched design fully preserves the sensitivity of the touchscreen. The manufacturer rates its hardness level at 9H on a ten-point scale, which translates into exceptional scratch resistance during everyday use.

The glass is characterized by crystal clarity, thanks to which it retains the natural colors and sharpness of the display. An additional advantage is a special oleophobic coating, which effectively minimizes the accumulation of fingerprints and other impurities on the surface of the glass, thus making it easier to keep it clean.

* The glass is compatible with most cases available on the market.
** Due to the variety of milling of the edges of the displays, a slight halo of air may form around the screen after the film/protective glass is installed on the screen! This is a natural situation and depends on the milling of the screen in a given piece.

INSTALLATION INSTRUCTIONS:
1) Start installation in the bathroom right after bathing - the water vapor will absorb all the dust from the atmosphere and it will not interfere with your installation.
2) Clean and degrease the surface of the screen thoroughly, then use a dry cloth to polish it to a shine.
3) Install the coating as evenly as you can - you can position it with two sheets, gluing them to the side of the device.
4) Get rid of air bubbles by pressing the whole thing down in a circular motion for a few dozen seconds. Do this so that the adhesive layer bonds to the screen as tightly as possible.

Tech-Protect Glass Spy+ tempered glass is the perfect solution for users who value privacy and data security. Its privacy technology limits the screen's visibility to others, protecting against unauthorized access, which increases the confidentiality of our conversations and messages.

Tech-Protect Glass Spy+ also provides excellent display protection against scratches, impacts, and dents, keeping your phone in pristine condition for a long time. Its hardness level is rated by the manufacturer at 9H on a 10-point scale. It doesn't affect touch sensitivity or color saturation. Additionally, it's coated with a high-quality oleophobic coating, minimizing fingerprints.

It is also worth paying attention to the incredible smoothness of the touch, which affects the comfort of using the phone.
Moreover, the easy installation procedure makes it accessible to any user, even those inexperienced in glass installation.

* Remember to remove and re-add fingerprints after installing the glass - if any.
** Due to the various milling patterns on display edges, a slight air halo may appear around the screen after installing any glass. This condition is due to the milling of the screen itself in a given unit.

INSTALLATION INSTRUCTIONS:
1) Start the installation in the bathroom right after taking a bath - the water vapor will absorb all the dust from the atmosphere and it will not interfere with the installation.
2) Thoroughly clean and degrease the screen surface, then polish it to a shine with a dry cloth.
3) Install the cover as evenly as you can - you can position it using two leaves, sticking them to the side of the device.
4) Eliminate any air bubbles by pressing firmly in circular motions for several dozen seconds. Do this to ensure the adhesive bonds as strongly as possible to the screen.

Tech-Protect Supreme is an irreplaceable protective kit that protects the screen and lens of your device during everyday use.

The tempered coating for the display is made of light and milled glass with a thickness of 0.3mm and a hardness of 9H. The crystal clear glass ensures image clarity, perfect reproduction of color saturation and does not disturb the sensitivity of touch. In addition, it is covered with a high-quality oleophobic coating, which minimizes the amount of fingerprints or other impurities left.

Protective lens cap made of high-quality tempered glass with a hardness of 9H. Precisely cut, it provides protection against scratches and breakage.

The set includes installation accessories along with a positioning frame, thanks to which installation is very easy and accessible to literally everyone.

INSTALLATION INSTRUCTIONS:
1) Start installation in the bathroom right after bathing - the water vapor will absorb all the dust from the atmosphere and it will not interfere with your installation.
2) Clean and degrease the surface of the screen thoroughly, then use a dry cloth to polish it to a shine.
3) Install the shell as evenly as you can - you can position it with the help of the positioning frame from the kit.
4) Get rid of air bubbles by pressing the whole thing down in a circular motion for a few dozen seconds. Do this so that the adhesive layer bonds to the screen as tightly as possible.

Tech-Protect Glass Fit+ tempered glass is a high-quality protective accessory made of lightweight and precisely milled glass with a thickness of only 0.3mm.

The perfectly matched design fully preserves the sensitivity of the touchscreen. The manufacturer rates its hardness level at 9H on a ten-point scale, which translates into exceptional scratch resistance during everyday use.

The glass is characterized by crystal clarity, thanks to which it retains the natural colors and sharpness of the display. An additional advantage is a special oleophobic coating, which effectively minimizes the accumulation of fingerprints and other impurities on the surface of the glass, thus making it easier to keep it clean.

* Due to the various milling of the edges of the displays, after installing the film/protective glass on the screen, a slight air halo may be created around the screen! This is a natural situation and depends on the milling of the screen in a given piece.

INSTALLATION INSTRUCTIONS:
1) Start installation in the bathroom right after bathing - the water vapor will absorb all the dust from the atmosphere and it will not interfere with your installation.
2) Clean and degrease the surface of the screen thoroughly, then use a dry cloth to polish it to a shine.
3) Install the coating as evenly as you can - you can position it with two sheets, gluing them to the side of the device.
4) Get rid of air bubbles by pressing the whole thing down in a circular motion for a few dozen seconds. Do this so that the adhesive layer bonds to the screen as tightly as possible.

Tech-Protect Glass Fit+ tempered glass is a high-quality protective accessory made of lightweight and precisely milled glass with a thickness of only 0.3mm.

The perfectly matched design fully preserves the sensitivity of the touchscreen. The manufacturer rates its hardness level at 9H on a ten-point scale, which translates into exceptional scratch resistance during everyday use.

The glass is characterized by crystal clarity, thanks to which it retains the natural colors and sharpness of the display. An additional advantage is a special oleophobic coating, which effectively minimizes the accumulation of fingerprints and other impurities on the surface of the glass, thus making it easier to keep it clean.

* Due to the various milling of the edges of the displays, after installing the film/protective glass on the screen, a slight air halo may be created around the screen! This is a natural situation and depends on the milling of the screen in a given piece.

INSTALLATION INSTRUCTIONS:
1) Start installation in the bathroom right after bathing - the water vapor will absorb all the dust from the atmosphere and it will not interfere with your installation.
2) Clean and degrease the surface of the screen thoroughly, then use a dry cloth to polish it to a shine.
3) Install the coating as evenly as you can - you can position it with two sheets, gluing them to the side of the device.
4) Get rid of air bubbles by pressing the whole thing down in a circular motion for a few dozen seconds. Do this so that the adhesive layer bonds to the screen as tightly as possible.

Tech-Protect Easy Set+, i.e. the tempered coating for the display, is made of light and milled glass with a thickness of 0.3mm. The crystal clear glass ensures image clarity, perfect reproduction of color saturation and does not disturb the sensitivity of touch. In addition, it is covered with a high-quality oleophobic coating, which minimizes the amount of fingerprints or other impurities left.

Protective lens cap made of high-quality tempered glass with a hardness of 9H. Precisely cut, it provides protection against scratches and breakage.

The set includes installation accessories along with a positioning frame, thanks to which installation is very easy and accessible to literally everyone.

INSTALLATION INSTRUCTIONS:
1) Start installation in the bathroom right after bathing - the water vapor will absorb all the dust from the atmosphere and it will not interfere with your installation.
2) Clean and degrease the surface of the screen thoroughly, then use a dry cloth to polish it to a shine.
3) Place the mounting frame with the glass on the watch screen – the glass will be perfectly centered. Remove the protective film from the top of the glass, then press the glass with your finger in the center of the screen to begin the adhesion process.
4) Remove the mounting frame. Get rid of air bubbles by pressing the whole thing down in a circular motion for a few dozen seconds. Do this so that the adhesive layer bonds to the screen as tightly as possible.

Tech-Protect Quick Set+ tempered glass is a premium screen protector that combines durability, comfort and modern technology. Made of 9H hardness glass, it provides exceptional impact and scratch resistance. Thanks to the innovative mounting system with installation frame, the application of the glass is extremely fast, precise and trouble-free – without the risk of air bubbles and exposure to dust.

The crystal clear surface guarantees excellent image quality and an extremely smooth tactile experience. The special oleophobic coating effectively reduces the formation of fingerprints and facilitates the condensation of water on the surface of the glass.

Tech-Protect Quick Set+ is the perfect solution for all those who want maximum protection and comfort of using their smartphone.

* Due to the variety of milling of the edges of the displays, a slight halo of air may form around the screen after the film/protective glass is installed on the screen. This is a natural situation and depends on the screen itself.

INSTALLATION INSTRUCTIONS:
1. Start installation in the bathroom right after bathing – the water vapor will absorb all the dust from the atmosphere and it will not interfere with your installation.
2. Thoroughly clean and degrease the surface of the screen, then use a dry cloth to polish it to a shine. Make sure there are no dust particles left.
3. Put the frame with the glass already mounted on your phone – it will ensure a precise fit and make application easier.
4. Pull the starter film to start the process of automatically sticking the glass on the screen.
5. Press the glass in the designated areas. Do this thoroughly so that the adhesive layer bonds well to the surface.
6. Remove the frame and remove any air bubbles - you can use the included squeegee to thoroughly squeeze any remaining air from under the surface of the glass.

Done! Enjoy a perfectly applied screen protector.

Tech-Protect Quick Set+ tempered glass is a premium screen protector that combines durability, comfort and modern technology. Made of 9H hardness glass, it provides exceptional impact and scratch resistance. Thanks to the innovative mounting system with installation frame, the application of the glass is extremely fast, precise and trouble-free – without the risk of air bubbles and exposure to dust.

The crystal clear surface guarantees excellent image quality and an extremely smooth tactile experience. The special oleophobic coating effectively reduces the formation of fingerprints and facilitates the condensation of water on the surface of the glass.

Tech-Protect Quick Set+ is the perfect solution for all those who want maximum protection and comfort of using their smartphone.

* Due to the variety of milling of the edges of the displays, a slight halo of air may form around the screen after the film/protective glass is installed on the screen. This is a natural situation and depends on the screen itself.

INSTALLATION INSTRUCTIONS:
1. Start installation in the bathroom right after bathing – the water vapor will absorb all the dust from the atmosphere and it will not interfere with your installation.
2. Thoroughly clean and degrease the surface of the screen, then use a dry cloth to polish it to a shine. Make sure there are no dust particles left.
3. Put the frame with the glass already mounted on your phone – it will ensure a precise fit and make application easier.
4. Pull the starter film to start the process of automatically sticking the glass on the screen.
5. Press the glass in the designated areas. Do this thoroughly so that the adhesive layer bonds well to the surface.
6. Remove the frame and remove any air bubbles - you can use the included squeegee to thoroughly squeeze any remaining air from under the surface of the glass.

Done! Enjoy a perfectly applied screen protector.

Tech-Protect Easy Set+, i.e. the tempered coating for the display, is made of light and milled glass with a thickness of 0.3mm and a hardness of 9H. The crystal clear glass ensures image clarity, perfect reproduction of color saturation and does not disturb the sensitivity of touch. In addition, it is covered with a high-quality oleophobic coating, which minimizes the amount of fingerprints or other impurities left.

Protective lens cap made of high-quality tempered glass with a hardness of 9H. Precisely cut, it provides protection against scratches and breakage.

The set includes installation accessories along with a positioning frame, thanks to which installation is very easy and accessible to literally everyone.

INSTALLATION INSTRUCTIONS:
1) Start installation in the bathroom right after bathing - the water vapor will absorb all the dust from the atmosphere and it will not interfere with your installation.
2) Clean and degrease the surface of the screen thoroughly, then use a dry cloth to polish it to a shine.
3) Install the shell as evenly as you can - you can position it with the help of the positioning frame from the kit.
4) Get rid of air bubbles by pressing the whole thing down in a circular motion for a few dozen seconds. Do this so that the adhesive layer bonds to the screen as tightly as possible.

Tech-Protect Easy Set+, i.e. the tempered coating for the display, is made of light and milled glass with a thickness of 0.3mm and a hardness of 9H. The crystal clear glass ensures image clarity, perfect reproduction of color saturation and does not disturb the sensitivity of touch. In addition, it is covered with a high-quality oleophobic coating, which minimizes the amount of fingerprints or other impurities left.

Protective lens cap made of high-quality tempered glass with a hardness of 9H. Precisely cut, it provides protection against scratches and breakage.

The set includes installation accessories along with a positioning frame, thanks to which installation is very easy and accessible to literally everyone.

INSTALLATION INSTRUCTIONS:
1) Start installation in the bathroom right after bathing - the water vapor will absorb all the dust from the atmosphere and it will not interfere with your installation.
2) Clean and degrease the surface of the screen thoroughly, then use a dry cloth to polish it to a shine.
3) Install the shell as evenly as you can - you can position it with the help of the positioning frame from the kit.
4) Get rid of air bubbles by pressing the whole thing down in a circular motion for a few dozen seconds. Do this so that the adhesive layer bonds to the screen as tightly as possible.

Tech-Protect Quick Set+ tempered glass is a premium screen protector that combines durability, comfort and modern technology. Made of 9H hardness glass, it provides exceptional impact and scratch resistance. Thanks to the innovative mounting system with installation frame, the application of the glass is extremely fast, precise and trouble-free – without the risk of air bubbles and exposure to dust.

The crystal clear surface guarantees excellent image quality and an extremely smooth tactile experience. The special oleophobic coating effectively reduces the formation of fingerprints and facilitates the condensation of water on the surface of the glass.

Tech-Protect Quick Set+ is the perfect solution for all those who want maximum protection and comfort of using their smartphone.

* Due to the variety of milling of the edges of the displays, a slight halo of air may form around the screen after the film/protective glass is installed on the screen. This is a natural situation and depends on the screen itself.

INSTALLATION INSTRUCTIONS:
1. Start installation in the bathroom right after bathing – the water vapor will absorb all the dust from the atmosphere and it will not interfere with your installation.
2. Thoroughly clean and degrease the surface of the screen, then use a dry cloth to polish it to a shine. Make sure there are no dust particles left.
3. Put the frame with the glass already mounted on your phone – it will ensure a precise fit and make application easier.
4. Pull the starter film to start the process of automatically sticking the glass on the screen.
5. Press the glass in the designated areas. Do this thoroughly so that the adhesive layer bonds well to the surface.
6. Remove the frame and remove any air bubbles - you can use the included squeegee to thoroughly squeeze any remaining air from under the surface of the glass.

Done! Enjoy a perfectly applied screen protector.