Tilta Foto & Video Zubehör - Seite 4

Without blocking the camera's hot shoe, the Tilta Full Camera Cage for Canon R5/R6, in black, provides two additional shoe mounts plus mounting threads for several optional Tilta add-ons. Dedicated 1/4"-20 threads allow you to attach side handles, single 15mm rod holders, and an HDMI clamp. There are also small threads on the front for securing a lens adapter support. For adjusting camera settings, the cage features a scroll wheel on top that controls the camera's right-hand scroll wheel .

Included with the cage is a quick release plate that attaches to the bottom. The plate offers multiple 1/4"-20 threads for balancing the cage on gimbals and other supports. The plate also allows quick release attachment to the optional Tilta 15mm LWS baseplate, which will let you expand the cage with rods and other accessories. Alternatively, Arca-Swiss and Manfrotto standard Tilta quick release plates can be purchased separately and attached in place of the included plate for direct compatibility with Arca/Manfrotto tripods and other supports.

The camera mounting platform is silicone padded for safe camera attachment. Also, a slot is provided on top for securing a safety strap, sold separately. The battery slot of the camera and all other ports and controls remain accessible through the all-aluminum cage.

Tilta TA-SH1-97-G Kamera-Montagezubehör Griff

Tilta Right Side Wooden Handle 2.0 Griff

- Includes a top plate with a shoe mount
- Four rosette mounts
- 1/4"-20 and 3/8"-16 accessory threads
- Multiple 1/4"-20 mounting threads for optimal balancing on gimbals
- Proprietary adapter plate included for attaching to the optional Tilta 15mm LWS Baseplate for RED KOMODO Cage by quick release

Tilta Right Side Wooden Handle 2.0 Griff

Tilta MB-T16-SFT Kamerafilterzubehör Kamerafilterhalter

Included:
- T10 Allen key x1
- T6 Allen key x1
- 1/4" Torx screw x1
- M2x6 Torx screws x3
- M2x4 Torx screws x2

This camera cage provides complete protective armor for the Fujifilm X-T3 and X-T4 cameras.

It provides several 1/4”-20 mounting points as well as two cold shoe mounting points.

The base of the cage also provides several mounting holes when attaching your camera to gimbals to more easily fine tune the balance of your setup.

A variety of different baseplates can be attached to the bottom of the cage, allowing for various rod mounting and optional power supply configurations.

The quick release top handle and various optional side handles can be attached to the cage to provide for different ways to comfortably operate your camera setup.

This kit of the Fujifilm X-T3/X-T4 cage includes: the base Fujifilm X-T3/X-T4 cage, quick release top handle, Arca and Manfrotto quick release baseplates, as well as a clamp to attach an HDMI cable comfortably to the cage (one specifically for the X-T3 and one for the X-T4).

Compatible with Type II Baseplates and Type I Side Handles.

Basic Ring Grip Plus for DJI Ronin Travel Kit

- Top Plate with Shoe Mount
- Proprietary QR Baseplate Adapter
- 4 x Rosette Mounts
- 1/4"-20 and 3/8"-16 Threads

Tilta Nucleus-M Wireless Lens Control System Partial Kit III
The Tilta Nucleus-M Wireless Lens Control System Partial Kit III contains the essential elements for pulling focus wirelessly while handholding. The kit includes the Nucleus-M left handgrip controller, one Nucleus-M motor, one removable lens belt, two motor power cables, and a battery charger unit (batteries not included). The handgrip controller provides wireless fingertip lens control while functioning as handgrip support for your camera rig, and the system enables pulling either focus, iris, or zoom on your lens. If you are using a lens that does not have standard cine-style gears, then use the included lens belt to add gears to your lens.

This partial kit is a single axis system, but the Nucleus-M left handgrip controller will allow you to control additional motors (not included) so you can control more than one lens ring. The included motor power cables allow you to power a motor from either a D-Tap power source or a second motor via the 7-pin to 7-pin connector. The included power cables allow you to easily add a second motor (not included) to the system. The included rosettes aid in mounting the handgrip controller to your camera or rig with ARRI-style rosettes. The system can wirelessly pull focus from up to 1000' away, and with separately available batteries you can power the hand unit for approximately 10 hours on a single charge.

The Tilta Universal Handgrip is a flexible handgrip system that attaches to either 15 mm lightweight or 19mm studio support rods. It consists of a rod bridge and two handgrips. Each handgrip consists of one 90° bend, a short extension, and a rubber hand grip. Each component of the handgrip assembly can be removed, and you can configure the system to suit your needs.

The rod bridge features a single knob that tightens/loosens the rod clamps so it is quick to mount or remove. The assembled system has six points of adjustment, three for each hand, so you can configure the handgrips so they are the most comfortable for you. The adjustment points feature Arri compatible rosettes and spring loaded locking levers. The rubber handgrips provide you with a comfortable sure grip.

Material of Construction CNC machined aluminum
Dimensions Boxed: 14 x 6.75 x 3.25" (35.6 x 17.1 x 8.3 cm)
Weight Shipping: 2.8 lb (1.3 kg)

The Nucleus Nano II Hand Wheel to DJI Ronin Control Adapter is the perfect option for controlling the DJI Focus Motor via the Nano II Hand Wheel.

This adapter mounts to either side of the RS2 or RS3 Pro’s NATO Rail Mounting Points and utilizes two screws for a secure connection.

The adapter features two sets of contact pins for the Nano II Hand Wheel, allowing users to mount the unit at different heights based on preference or clearance restrictions with the pan motor.

The Hand Wheel mounts to the adapter via its internal NATO clamp and can draw power from the gimbal body in addition to being able to control the motor.

- These cables for the Nucleus-M give you run/stop capabilities in camera systems that support it. Simply plug the 7-pin end of the cable into one of the motors and the other end into the R/S port of the camera.
- Note that this cable was specifically designed for the Nucleus-M so the R/S function only works with the Nucleus-M’s own hand unit and hand grips.

Packing List
(1) 68.6cm cable
(1) Male connection
(1) 7-pin Male connection

Technical Data
Weight: 40g
Length: 68.6cm
Color: Black
Materials: Copper, rubber, aluminum-alloy

Mirage Pro Matte Box VND Kit

For the Nucleus-M I & II Motors and Hand Grips

Camera Cage for Blackmagic PYXIS 6K

Protective armor for the Canon R5/R6

For Sony ZV-E10 II

Comes with brackets and storage cases that can be attached to equipment and cages with 1/4 threaded holes, and whiteboard markers.

These hand grip extension arms have angled Arri Standard Rosettes that allow you to create more space and comfort while operating on one of the various Tilta shoulder mount systems.

This 60g counterweight can be used in conjunction with the Side Arm Counterweight Clamp and/or the Quick Release Baseplate Counterweight Adapter to provide additional weight if needed when balancing your camera setup on the gimbal.

This advanced camera rig is designed for universal use with most DSLR cameras. It comes with everything you need for a complete camera accessories kit including a matte box, a follow focus, mounting points for accessories, a monitor arm, a top handle, handles and a shoulder pad for handheld operation, and a Sony VCT-UT14 compatible baseplate for tripod operation.

The Tilta 15x300mm Rod in black is designed for professional camera rigs, offering a durable and versatile solution for mounting various camera accessories. Made from high-quality materials, it ensures long-lasting performance while providing a secure and stable connection for your equipment.

The Tilta 4" Threaded Aluminum 15mm Rod in gray is perfect for compact and versatile setups. Made from durable aluminum, this rod offers a secure and stable solution for mounting camera accessories. The threaded ends ensure a tight and reliable fit for various equipment.