Entwässerungsprodukte - Seite 4

Für Gebäudeentwässerung, für Geländeentwässerung

Für Gebäudeentwässerung, für Geländeentwässerung, für hochfeste, dauerhafte Verbindung von Rohren und Fittings

Wavin PVC sewer pipe 110x1000mm SN8 EN1401

The Wafix PP system is made from the reusable PP (Polypropylene), which gives both pipes and fittings good physical and chemical properties. The PP material used has a high E-module, which gives the pipes a good length stiffness and a great impact strength. Therefore, the Wafix PP system withstands the impacts and shocks that can occur during installation and operation - even at minus degrees. Wafix PP is a complete drainage system with pipes and fittings in the dimensions: Ø32 mm Ø40 mm Ø50 mm Ø50 mm Ø75 mm Ø110 mm The program also comes in a white version in dimensions Ø32, Ø40 and Ø50 mm, especially suitable for visible installations. The system's unique Fix·lock® sealing ring seals on as many as three points, providing a large construction surface against the pipe and ensuring that your joints are 100% dense each time. It provides extra security and security if you insert or hide the pipes in a shaft.

AMAX Pro ist ein Abfluss in PP für Entwässerungssysteme in Gebäuden zur Beförderung von Abwasser.

Für verdeckte Installation, Für abgedeckte Installation. Für den Anschluss von Waschmaschine und Kondensationstrockner

The Wafix PP system is made from the reusable PP (Polypropylene), which gives both pipes and fittings good physical and chemical properties. The PP material used has a high E-module, which gives the pipes a good length stiffness and a great impact strength. Therefore, the Wafix PP system withstands the impacts and shocks that can occur during installation and operation - even at minus degrees. Wafix PP is a complete drainage system with pipes and fittings in the dimensions: Ø32 mm Ø40 mm Ø50 mm Ø50 mm Ø75 mm Ø110 mm The program also comes in a white version in dimensions Ø32, Ø40 and Ø50 mm, especially suitable for visible installations. The system's unique Fix·lock® sealing ring seals on as many as three points, providing a large construction surface against the pipe and ensuring that your joints are 100% dense each time. It provides extra security and security if you insert or hide the pipes in a shaft.

Geruchsverschluss für das Waschbecken aus Kunststoff. Mit einem Abwinkelungsgrad von 45° und Anschlussmöglichkeit für den Abwasserschlauch. Qualitätskontrolliert nach DIN EN 274 G: 112, DN: 40

Geberit Pluvia Dachablauf: Maximale Abflussrate=9l/s

Geruchsverschluss für das Waschbecken ohne Anpassung der Rohrkomponenten. Abflussbogen 45° DN1: 40, DN2: 50 nicht enthalten

dBlue ist ein Abflussrohr aus PP (Polypropylen) in 3 Schichten. Es eignet sich für die Installation an Orten, an denen eine Geräuschreduzierung erforderlich ist. Das Rohrsystem hat einen nachgewiesenen Schallpegel von 19 dB (A). Wenn strengere Anforderungen an den Schallschutz gestellt werden, empfehlen wir FRIAPHON.

Für die Entwässerung von Geberit CleanLine DuschrinnenFür VerbundabdichtungenFür Estrichhöhe 90 mm am Einlauf

The set consists of a panel, rail, heightener set and screws. The set must be assembled before installation.

Includes 2 x hooks to be used for lifting the panel.

The panel solution is placed directly inside the drain unit.

The rail is specially designed to provide a snug fit. Installed with HighLine frame.

The heightener set to adjust the panel is included, so that the panel can be matched to the frame height.

Für die Entwässerung von Gebäuden

The set consists of the Custom base, rail, heightener set and screws.

The set must be assembled before installation.

Glue your own floor tile to the base, to complete the solution.

The Custom solution is placed directly inside the drain unit.

The rail is specially designed to provide a snug fit.

Special glue for adhesion of your own tile and 10 x 6-mm spacers to use for installation are also included.

dBlue ist ein Abflussanschluss aus PP-MD (Polypropylen mit Mineralstoff-Füllung). Er eignet sich für den Einbau an Orten, an denen eine Geräuschreduzierung erforderlich ist. Das Rohr- und Anschlusssystem hat einen nachgewiesenen Schallpegel von 19 dB (A). Wenn strengere Anforderungen an den Schallschutz gestellt werden, empfehlen wir FRIAPHON.

Wastewater pipesystem GM-X galvanized DN 80x2000 mm

Wastewater pipesystem GM-X galvanized DN 70x2000 mm

The Wafix PP system is made from the reusable PP (Polypropylene), which gives both pipes and fittings good physical and chemical properties. The PP material used has a high E-module, which gives the pipes a good length stiffness and a great impact strength. Therefore, the Wafix PP system withstands the impacts and shocks that can occur during installation and operation - even at minus degrees. Wafix PP is a complete drainage system with pipes and fittings in the dimensions: Ø32 mm Ø40 mm Ø50 mm Ø50 mm Ø75 mm Ø110 mm The program also comes in a white version in dimensions Ø32, Ø40 and Ø50 mm, especially suitable for visible installations. The system's unique Fix·lock® sealing ring seals on as many as three points, providing a large construction surface against the pipe and ensuring that your joints are 100% dense each time. It provides extra security and security if you insert or hide the pipes in a shaft.

The Wafix PP system is made from the reusable PP (Polypropylene), which gives both pipes and fittings good physical and chemical properties. The PP material used has a high E-module, which gives the pipes a good length stiffness and a great impact strength. Therefore, the Wafix PP system withstands the impacts and shocks that can occur during installation and operation - even at minus degrees. Wafix PP is a complete drainage system with pipes and fittings in the dimensions: Ø32 mm Ø40 mm Ø50 mm Ø50 mm Ø75 mm Ø110 mm The program also comes in a white version in dimensions Ø32, Ø40 and Ø50 mm, especially suitable for visible installations. The system's unique Fix·lock® sealing ring seals on as many as three points, providing a large construction surface against the pipe and ensuring that your joints are 100% dense each time. It provides extra security and security if you insert or hide the pipes in a shaft.

Für Gebäudeentwässerung, für Geländeentwässerung

Blech, gestanzt: 12l/s

Exclusive frame design with upper section of solid 4-mm stainless steel.

Insert ensures a snug fit inside the drain unit.

The frame enhances the exclusive design of the floor drain.

Frame available in 10, 12, 15 and 25 mm heights (depending on the thickness of the floor tile).

NB! Frame height (H) = tile thickness + approximately 2 mm for tile mortar and membrane.

Wavin PVC sewer pipe 200x1000mm SN8 EN1401

Schlauchverschraubung 45° für Abwasserschlauchanschluss - KunststoffG: 1, Ø: 20