Druckrohre und Armaturen - Seite 8

Press connector system with press connectors and pipes made of stainless steel material Nos. 1.4401 and 1.4521 in acc. with DIN EN 10088, DIN EN 10312, DVGW worksheet GW 541, system certification for connectors and pipes in acc. with DVGW worksheet W 534, for drinking water installations in acc. with DIN 1988. For dimensionally stable concealed and pre-wall installations of manifold and riser pipes in Viega component assembly.Press connectorsAll sizes with SC-Contur – connections, which remain unpressed become visible when the system is filled. The SC-Contur is certified and fulfils the requirements of DVGW worksheet W 534, point 12.14, connectors with forced leakage.During leakage tests with water, Viega guarantees the identification of unpressed connections in the pressure range 0.1 MPa–0.65 MPa, in the case of a dry leakage test with compressed air or noble gases from 22 hPa–0.3 MPa.MarkingGreen dot on the press connectionSealing elementsEPDM, black (ethylene-propylene-die

Press connector system with press connectors and pipes made of stainless steel material Nos. 1.4401 and 1.4521 in acc. with DIN EN 10088, DIN EN 10312, DVGW worksheet GW 541, system certification for connectors and pipes in acc. with DVGW worksheet W 534, for drinking water installations in acc. with DIN 1988. For dimensionally stable concealed and pre-wall installations of manifold and riser pipes in Viega component assembly.Press connectorsAll sizes with SC-Contur – connections, which remain unpressed become visible when the system is filled. The SC-Contur is certified and fulfils the requirements of DVGW worksheet W 534, point 12.14, connectors with forced leakage.During leakage tests with water, Viega guarantees the identification of unpressed connections in the pressure range 0.1 MPa–0.65 MPa, in the case of a dry leakage test with compressed air or noble gases from 22 hPa–0.3 MPa.MarkingGreen dot on the press connectionSealing elementsEPDM, black (ethylene-propylene-die

Sanpress Inox T-Stück mit SC-Contur- Stahl nicht korrodierend - PressverbindernKomponentenEPDM-Dichtelemented1: 28, d2: 15, d3: 28

Press connector system with press connectors and pipes made of stainless steel material Nos. 1.4401 and 1.4521 in acc. with DIN EN 10088, DIN EN 10312, DVGW worksheet GW 541, system certification for connectors and pipes in acc. with DVGW worksheet W 534, for drinking water installations in acc. with DIN 1988. For dimensionally stable concealed and pre-wall installations of manifold and riser pipes in Viega component assembly.Press connectorsAll sizes with SC-Contur – connections, which remain unpressed become visible when the system is filled. The SC-Contur is certified and fulfils the requirements of DVGW worksheet W 534, point 12.14, connectors with forced leakage.During leakage tests with water, Viega guarantees the identification of unpressed connections in the pressure range 0.1 MPa–0.65 MPa, in the case of a dry leakage test with compressed air or noble gases from 22 hPa–0.3 MPa.MarkingGreen dot on the press connectionSealing elementsEPDM, black (ethylene-propylene-die

Für kaltes und warmes Trinkwasser, für Heizungswasser, für Kühlwasser ohne Frostschutzmittel, für Kühlwasser mit Frostschutzmittel, für Fernheizungswasser 120 °C, für gesättigten Dampf 120 °C, für Brauchwasser, für ultrareines Wasser (außer pharmazeutisches Wasser), Für Regenwasser mit einem pH-Wert von> 6.0 Für Grau- und Schwarzwassersysteme mit einem pH-Wert> 6.0 Für Löschwassersysteme (nass) Für Sprinkleranlagen (nass) Für Chemikalien und technische Flüssigkeiten Für Druckluft (Ölreinheitsklasse 0–3), Unterdrucksysteme Inerte Gase (z.B. Stickstoff), Industriegase (z.B. Acetylen-, Schutzgase), Technische Gebäudesysteme , Industrie und Schiffbau Anwendungsübersicht: Geberit Mapress Edelstahl für flüssige Medien Anwendungsübersicht: Geberit Mapress Edelstahl for gasförmige Medien.

Press connector system with press connectors and pipes made of stainless steel material Nos. 1.4401 and 1.4521 in acc. with DIN EN 10088, DIN EN 10312, DVGW worksheet GW 541, system certification for connectors and pipes in acc. with DVGW worksheet W 534, for drinking water installations in acc. with DIN 1988. For dimensionally stable concealed and pre-wall installations of manifold and riser pipes in Viega component assembly.Press connectorsAll sizes with SC-Contur – connections, which remain unpressed become visible when the system is filled. The SC-Contur is certified and fulfils the requirements of DVGW worksheet W 534, point 12.14, connectors with forced leakage.During leakage tests with water, Viega guarantees the identification of unpressed connections in the pressure range 0.1 MPa–0.65 MPa, in the case of a dry leakage test with compressed air or noble gases from 22 hPa–0.3 MPa.MarkingGreen dot on the press connectionSealing elementsEPDM, black (ethylene-propylene-die

Press connector systems with press connectors and pipes made of non-alloy steel 1.0308 (E235), in acc. with EN 10305-3, externally galvanised with a zinc layer thickness of 8–15 m (blue chromatised).Press connectorsAll sizes with SC-Contur – connections, which remain unpressed become visible when the system is filled. The SC-Contur is certified and fulfils the requirements of DVGW worksheet W 534, point 12.14, connectors with forced leakage.During leakage tests with water, Viega guarantees the identification of unpressed connections in the pressure range 0.1 MPa–0.65 MPa, in the case of a dry leakage test with compressed air or noble gases from 22 hPa–0.3 MPa.MarkingRed symbol (to prevent confusion with Sanpress Inox (stainless steel) articles) »Not for drinking water installations«Sealing elementsEPDM, black (ethylene-propylene-dien-monomer rubber),not resistant against hydrocarbon solvent, chlorinated hydrocarbon solvents, turpentine, petrol, FKM, dull blackDimensionsD38

Sanpress Inox Reducer with SC-Contur- steel non-corroding- plug-in end, press connectionComponentsEPDM sealing element, VdS certificationd1: 42, d2: 28

Für kaltes und warmes Trinkwasser, für Heizungswasser, für Kühlwasser ohne Frostschutzmittel, für Kühlwasser mit Frostschutzmittel, für Fernheizungswasser 120 °C, für gesättigten Dampf 120 °C, für Brauchwasser, für ultrareines Wasser (außer pharmazeutisches Wasser), Für Regenwasser mit einem pH-Wert von> 6.0 Für Grau- und Schwarzwassersysteme mit einem pH-Wert> 6.0 Für Löschwassersysteme (nass) Für Sprinkleranlagen (nass) Für Chemikalien und technische Flüssigkeiten Für Druckluft (Ölreinheitsklasse 0–3), Unterdrucksysteme Inerte Gase (z.B. Stickstoff), Industriegase (z.B. Acetylen-, Schutzgase), Technische Gebäudesysteme , Industrie und Schiffbau Anwendungsübersicht: Geberit Mapress Edelstahl für flüssige Medien Anwendungsübersicht: Geberit Mapress Edelstahl for gasförmige Medien.

Sanpress Inox T-piece with SC-Contur- steel non-corroding- press connectors, Rp-threadComponentsEPDM sealing elements, polygond1: 18, Rp: 12, d2: 18

Für kaltes und warmes Trinkwasser, für Heizungswasser, für Kühlwasser ohne Frostschutzmittel, für Kühlwasser mit Frostschutzmittel, für Fernheizungswasser 120 °C, für gesättigten Dampf 120 °C, für Brauchwasser, für ultrareines Wasser (außer pharmazeutisches Wasser), Für Regenwasser mit einem pH-Wert von> 6.0 Für Grau- und Schwarzwassersysteme mit einem pH-Wert> 6.0 Für Löschwassersysteme (nass) Für Sprinkleranlagen (nass) Für Chemikalien und technische Flüssigkeiten Für Druckluft (Ölreinheitsklasse 0–3), Unterdrucksysteme Inerte Gase (z.B. Stickstoff), Industriegase (z.B. Acetylen-, Schutzgase), Technische Gebäudesysteme , Industrie und Schiffbau Anwendungsübersicht: Geberit Mapress Edelstahl für flüssige Medien Anwendungsübersicht: Geberit Mapress Edelstahl for gasförmige Medien.

mit SC-Contur• Edelstahl• Pressanschluss, Rp-Gewinde mit EPDM-Dichtung

Für die Installation des internen Umlaufrohrs.

Sanpress Inox T-piece with SC-Contur- steel non-corroding- press connectors, Rp-threadComponentsEPDM sealing elements, polygond1: 18, Rp: 34, d2: 18

Press connector system with press connectors and pipes made of stainless steel material Nos. 1.4401 and 1.4521 in acc. with DIN EN 10088, DIN EN 10312, DVGW worksheet GW 541, system certification for connectors and pipes in acc. with DVGW worksheet W 534, for drinking water installations in acc. with DIN 1988. For dimensionally stable concealed and pre-wall installations of manifold and riser pipes in Viega component assembly.Press connectorsAll sizes with SC-Contur – connections, which remain unpressed become visible when the system is filled. The SC-Contur is certified and fulfils the requirements of DVGW worksheet W 534, point 12.14, connectors with forced leakage.During leakage tests with water, Viega guarantees the identification of unpressed connections in the pressure range 0.1 MPa–0.65 MPa, in the case of a dry leakage test with compressed air or noble gases from 22 hPa–0.3 MPa.MarkingGreen dot on the press connectionSealing elementsEPDM, black (ethylene-propylene-die

Prestabo Adapter Ellbogen 90° mit SC-Contur- verzinktem unlegiertem Stahl- Pressverbindung, R-Gewindekomponenten EPDM-Dichtelement, VdS-Zertifizierung d: 22, R: 34

Press connector system with press connectors and pipes made of stainless steel material Nos. 1.4401 and 1.4521 in acc. with DIN EN 10088, DIN EN 10312, DVGW worksheet GW 541, system certification for connectors and pipes in acc. with DVGW worksheet W 534, for drinking water installations in acc. with DIN 1988. For dimensionally stable concealed and pre-wall installations of manifold and riser pipes in Viega component assembly.Press connectorsAll sizes with SC-Contur – connections, which remain unpressed become visible when the system is filled. The SC-Contur is certified and fulfils the requirements of DVGW worksheet W 534, point 12.14, connectors with forced leakage.During leakage tests with water, Viega guarantees the identification of unpressed connections in the pressure range 0.1 MPa–0.65 MPa, in the case of a dry leakage test with compressed air or noble gases from 22 hPa–0.3 MPa.MarkingGreen dot on the press connectionSealing elementsEPDM, black (ethylene-propylene-die

Sanpress Inox T-piece with SC-Contur- steel non-corroding- press connectors, Rp-threadComponentsEPDM sealing elements, polygon, VdS certificationd1: 42, Rp: 12, d2: 42

Press connector system with press connectors and pipes made of stainless steel material Nos. 1.4401 and 1.4521 in acc. with DIN EN 10088, DIN EN 10312, DVGW worksheet GW 541, system certification for connectors and pipes in acc. with DVGW worksheet W 534, for drinking water installations in acc. with DIN 1988. For dimensionally stable concealed and pre-wall installations of manifold and riser pipes in Viega component assembly.Press connectorsAll sizes with SC-Contur – connections, which remain unpressed become visible when the system is filled. The SC-Contur is certified and fulfils the requirements of DVGW worksheet W 534, point 12.14, connectors with forced leakage.During leakage tests with water, Viega guarantees the identification of unpressed connections in the pressure range 0.1 MPa–0.65 MPa, in the case of a dry leakage test with compressed air or noble gases from 22 hPa–0.3 MPa.MarkingGreen dot on the press connectionSealing elementsEPDM, black (ethylene-propylene-die

Armaturen für verzinkte Stahlrohre, für Heizsysteme.

Press connector systems with press connectors and pipes made of non-alloy steel 1.0308 (E235), in acc. with EN 10305-3, externally galvanised with a zinc layer thickness of 8–15 m (blue chromatised).Press connectorsAll sizes with SC-Contur – connections, which remain unpressed become visible when the system is filled. The SC-Contur is certified and fulfils the requirements of DVGW worksheet W 534, point 12.14, connectors with forced leakage.During leakage tests with water, Viega guarantees the identification of unpressed connections in the pressure range 0.1 MPa–0.65 MPa, in the case of a dry leakage test with compressed air or noble gases from 22 hPa–0.3 MPa.MarkingRed symbol (to prevent confusion with Sanpress Inox (stainless steel) articles) »Not for drinking water installations«Sealing elementsEPDM, black (ethylene-propylene-dien-monomer rubber),not resistant against hydrocarbon solvent, chlorinated hydrocarbon solvents, turpentine, petrol, FKM, dull blackDimensionsD38

Prestabo T-Stück mit SC-Contur- verzinktem unlegiertem Stahl- PressverbindernKomponentenEPDM-Dichtelemented1: 28, d2: 15, d3: 28

Sanpress Inox Sliding coupling with SC-Contur- steel non-corroding- press connectors ComponentsEPDM sealing elementsd: 18

Für kaltes und warmes Trinkwasser, für Heizungswasser, für Kühlwasser ohne Frostschutzmittel, für Kühlwasser mit Frostschutzmittel, für Fernheizungswasser 120 °C, für gesättigten Dampf 120 °C, für Brauchwasser, für ultrareines Wasser (außer pharmazeutisches Wasser), Für Regenwasser mit einem pH-Wert von> 6.0 Für Grau- und Schwarzwassersysteme mit einem pH-Wert> 6.0 Für Löschwassersysteme (nass) Für Sprinkleranlagen (nass) Für Chemikalien und technische Flüssigkeiten Für Druckluft (Ölreinheitsklasse 0–3), Unterdrucksysteme Inerte Gase (z.B. Stickstoff), Industriegase (z.B. Acetylen-, Schutzgase), Technische Gebäudesysteme , Industrie und Schiffbau Anwendungsübersicht: Geberit Mapress Edelstahl für flüssige Medien Anwendungsübersicht: Geberit Mapress Edelstahl for gasförmige Medien.

Sanpress Inox Adapter mit SC-Contur-Stahl, nicht korrodierender Pressverbindung, R-Gewindekomponenten EPDM-Dichtelement, Polygon, VdS-Zertifizierung d: 28, R: 34