Druckrohre und Armaturen - Seite 44

Viega 1115.1

Viega 1115.1

Viega 1115.1

The Geberit Mapress electro-galvanized press fitting system can be used for joining pipes in closed hot and cold water systems as well as sprinkler systems, fire-fighting water pipes and compressed air networks. Mapress electro-galvanized fittings are made of unalloyed steel. The press joining of pipes and fittings must be carried out with press jaws with an M-profile. When pressing, the pipe is inserted into the press fitting to the marked insertion depth and is thus pressed together.

Please note that Geberit Mapress pipes should be cut to size with a regular pipe cutter before use, and then deburred both inside and outside with a suitable deburring tool. Cutting and deburring are important precisely to avoid damage to the O-ring when the pipe is inserted into the press fitting.

Viega 2217.2

For cold and hot potable water, For heating water, For cooling water without antifreeze agent, For cooling water with antifreeze agent, For remote network heating water 120 °C, For saturated steam 120 °C, For service water, For ultrapure water (except pharmaceutical water), For rainwater with a pH value of > 6.0, For grey and black water with pH value > 6.0, For extinguishing water (wet), For sprinklers (wet), For chemicals and technical liquids, For compressed air (oil purity class 0–3), For negative pressure, For inert gases (e.g. nitrogen), For industrial gases (e.g. acetylene, shielding gases), For technical building systems, industry and shipbuilding, Application overview: Geberit Mapress Stainless Steel for liquid media, Application overview: Geberit Mapress Stainless Steel for gaseous media.

Viega 1165

Viega 1117.2

Prestabo T-piece with SC-Contur- galvanised non-alloyed steel- press connectorsComponentsEPDM sealing elements, VdS certificationd1: 54, d2: 22, d3: 54

Viega 1118

Sanpress Plug-in piece- gunmetal or silicium bronze- plug-in end, R-threadComponentsPolygon.

Sanpress Plug-in piece- gunmetal or silicium bronze- plug-in end, R-threadComponentsPolygon.

Prestabo T-piece with SC-Contur- non-alloyed steel, galvanised- press connections, Rp-threadComponentsEPDM sealing elements, polygon

Press connector system with press connectors and pipes made of copper in acc. with EN 1057 and DVGW worksheet GW 392 suitable for:•Gases in acc. with DVGW G 260 in gas installations in acc. with DVGW-TRGI 2008 (DVGW worksheet G 600) / DVFG-TRF 2012•Liquid gas in the gas phase for domestic and commercial applications, tested in acc. with DVGW worksheet G 5614•Heating oil pipelines for heating oil in acc. with DIN 51603-1•Diesel fuel pipelines for diesel fuel, as suction and pressure pipelines in acc. with EN 590 in consideration of the general technical approval Z-38.4-71Press connectorsAll sizes with SC-Contur – connections, which remain unpressed become visible when the system is filled. The SC-Contur is certified and fulfils the requirements of DVGW worksheet G 5614, point 4.4.1, connectors with forced leakage.During leakage tests with water, Viega guarantees the identification of unpressed connections in the pressure range 0.1 MPa–0.65 MPa, in the case of a dry leakage test with compressed air or noble gases from 22 hPa–0.3 MPa.MarkingYellow dot, yellow rectangle and inscription »Gas MOP 5 / GT1«Sealing elementsHNBR, yellowDimensions/MaterialStandard sizes: d 12, 15, 18, 22, 28, 35, 42, 54 made of copperXL sizes: d 64.0 made of copperPress connectors with threaded connection d 12–54 made of gunmetalXL press connectors with threaded connection d 64.0 made of copperAreas of applicationNatural gas/Liquid gasHeating oil/Diesel fuel (d 12–54)NoteOnly Viega copper and gunmetal press connectors, which are marked with a yellow rectangle and have the inscription »Gas MOP 5 / GT1« are permitted for use in installations for gas, heating oil and diesel fuel systems!Use of the system for application areas and media other than those described here must be agreed with Viega Service Center through a material request.Operating conditionsGas and liquid gas systems•Operating temperature -20 °C up to +70 °C•Operating pressure max. 0.5 MPa•Operatin

Wavin Tigris K5 Pressfittings sind für eine einfache Installation sowie eine optimierte Durchflussleistung entwickelt

Für Sanitäranlagen und Industrie, für Heizsysteme, Kühlung und Industrie.

Prestabo Crossover galvanised non-alloyed steel plug-in ends Galvanised non-alloyed steel plug-in ends

Viega 2426

Produktinformation: Artikel XPress Kupfer Gerade Kupplung FF 18, Artikelnummer (GTIN) 047215018 (05022050120779), Einzelstück GTIN 05022050120083, Teil der Artikelfamilie S1 - XPress Kupfer Gerade Kupplung Größe 18, Gewicht des Artikels: 0.04 kg l x b x h: 44x26x26 Verpackung (10 Beutel), Farben: Kupfer Materialien: Kupfer (CW024A) Hersteller Pegler Yorkshire Form gerade Anschlusstyp Pressen (M) Abdichtung EPDM

Geberit 21213 Anschlussteil für Wasserschlauch Schlauchanschluss Karbon, Stahl 1 Stück(e)

Für Heizungsanlagen, Kühlung und Industrie
Für klimatisch technische Bereiche
Für Sprinkleranlagen (nass)
Nicht geeignet für Trinkwasserleitungen

Für Heizungsanlagen, Kühlung und Industrie
Für klimatisch technische Bereiche
Für Sprinkleranlagen (nass)
Nicht geeignet für Trinkwasserleitungen

Für Heizungsanlagen, Kühlung und Industrie
Für klimatisch technische Bereiche
Für Sprinkleranlagen (nass)
Nicht geeignet für Trinkwasserleitungen

Für Heizungsanlagen, Kühlung und Industrie Für klimatisch technische Bereiche Für Sprinkleranlagen (nass) Nicht geeignet für Trinkwasserleitungen.

Geberit Mapress FZ El-forzinket

Til varmeanlæg og afkølingPresseindikatorUtæt ved manglende presningFrem- og tilbageløb kan skiftesUdvendigt forzinketT...

...