Druckrohre und Armaturen - Seite 39

T-piece ft cst d15-rp1/2-15 zn-pl

XPress Carbon straight coupling FF 76,1

Für Sanitäranlagen und Industrie, für Heizsysteme, Kühlung und Industrie.

Viega 2326.1

Profipress G-Kupplung mit SC-Contur - Kupfer-Presseverbinder Komponenten HNBR-Dichtelemente d: 42

Viega 2626.1

Viega 2626.1

Viega 2616

Profipress G-Kupplung mit SC-Contur - Kupfer-Presseverbinder Komponenten HNBR-Dichtelemente d: 35

Profipress G T-stykke med SC-Contur- kobber- prestilslutningMedHNBR pakningerd1: 28, d2: 22, d3: 28

Viega 2416

Viega 2218

Sanpress T-piece with SC-Contur- gunmetal or silicium bronze- press connectorsComponentsEPDM sealing elementsd1: 28, d2: 22, d3: 22

Press connector system with press connectors made of copper and gunmetal tested in acc. with DVGW worksheet W 534 with DVGW test seal and pipes made of copper in acc. with EN 1057 in acc. with DVGW worksheet GW 392.Suitable for drinking water installations in acc. with DIN 1988.For dimensionally stable concealed and pre-wall installations of manifold and riser pipes in Viega component assembly.Press connectorsAll sizes with SC-Contur – connections, which remain unpressed become visible when the system is filled. The SC-Contur is certified and fulfils the requirements of DVGW worksheet W 534, point 12.14, connectors with forced leakage.During leakage tests with water, Viega guarantees the identification of unpressed connections in the pressure range 0.1 MPa–0.65 MPa, in the case of a dry leakage test with compressed air or noble gases from 22 hPa–0.3 MPa.MarkingGreen dot on the press connectionSealing elementsEPDM, black (ethylene-propylene-dien-monomer rubber), up to 110 °C

Forcing plug- for leakage test, temporarily closed pipeline section- brass- compression fitting, hose connection for filling hoseComponentsKFE tap, union nut screw fittingd: 28

For cold and hot potable water, For heating water, For cooling water without antifreeze agent, For cooling water with antifreeze agent, For remote network heating water 120 °C, For saturated steam 120 °C, For service water, For ultrapure water (except pharmaceutical water), For rainwater with a pH value of > 6.0, For grey and black water with pH value > 6.0, For extinguishing water (wet), For sprinklers (wet), For chemicals and technical liquids, For compressed air (oil purity class 0–3), For negative pressure, For inert gases (e.g. nitrogen), For industrial gases (e.g. acetylene, shielding gases), For technical building systems, industry and shipbuilding, Application overview: Geberit Mapress Stainless Steel for liquid media, Application overview: Geberit Mapress Stainless Steel for gaseous media.

Viega 2311.1

Sanpress Inox Connection screw fitting with SC-Contur- steel non-corroding- press connection, G-thread- flat sealingComponentsEPDM sealing element, EPDM flat seal, union nut screw fitting d: 18, G: 34

Sanpress Inox Adapter with SC-Contur- steel non-corroding- press connection, R-thread Components EPDM sealing element, polygon, VdS certificationd: 28, R: 34

Sanpress Inox Adapter with SC-Contur- steel non-corroding- press connection, R-thread Components EPDM sealing element, polygond: 18, R: 34

Sanpress Inox Adapter elbow 90° with SC-Contur- steel non-corroding- press connection, R-threadComponentsEPDM sealing element, polygon, VdS certificationd: 22, R: 34

Sanpress Inox Adapter elbow 90° with SC-Contur- steel non-corroding- press connection, R-threadComponentsEPDM sealing element, polygond: 15, R: 12

Sanpress Inox Adapter elbow 90° with SC-Contur- steel non-corroding- press connection, Rp-threadComponentsEPM sealing element, VdS certificationd: 22, Rp: 34

Sanpress Inox Adapter elbow 90° with SC-Contur- steel non-corroding- press connection, Rp-threadComponentsEPDM sealing element .

Press connector system with press connectors and pipes made of copper in acc. with EN 1057 and DVGW worksheet GW 392 suitable for:•Gases in acc. with DVGW G 260 in gas installations in acc. with DVGW-TRGI 2008 (DVGW worksheet G 600) / DVFG-TRF 2012•Liquid gas in the gas phase for domestic and commercial applications, tested in acc. with DVGW worksheet G 5614•Heating oil pipelines for heating oil in acc. with DIN 51603-1•Diesel fuel pipelines for diesel fuel, as suction and pressure pipelines in acc. with EN 590 in consideration of the general technical approval Z-38.4-71Press connectorsAll sizes with SC-Contur – connections, which remain unpressed become visible when the system is filled. The SC-Contur is certified and fulfils the requirements of DVGW worksheet G 5614, point 4.4.1, connectors with forced leakage.During leakage tests with water, Viega guarantees the identification of unpressed connections in the pressure range 0.1 MPa–0.65 MPa, in the case of a dry leakage test with compressed air or noble gases from 22 hPa–0.3 MPa.MarkingYellow dot, yellow rectangle and inscription »Gas MOP 5 / GT1«Sealing elementsHNBR, yellowDimensions/MaterialStandard sizes: d 12, 15, 18, 22, 28, 35, 42, 54 made of copperXL sizes: d 64.0 made of copperPress connectors with threaded connection d 12–54 made of gunmetalXL press connectors with threaded connection d 64.0 made of copperAreas of applicationNatural gas/Liquid gasHeating oil/Diesel fuel (d 12–54)NoteOnly Viega copper and gunmetal press connectors, which are marked with a yellow rectangle and have the inscription »Gas MOP 5 / GT1« are permitted for use in installations for gas, heating oil and diesel fuel systems!Use of the system for application areas and media other than those described here must be agreed with Viega Service Center through a material request.Operating conditionsGas and liquid gas systems•Operating temperature -20 °C up to +70 °C•Operating pressure max. 0.5 MPa•Operatin