Druckrohre und Armaturen - Seite 33

Press connector system with press connectors made of gunmetal, pipes made of stainless steel material Nos. 1.4401 and 1.4521 in acc. with DINEN 10088, DIN EN 10312, DVGW worksheet GW 541, system certification for connectors and pipes in acc. with DVGW worksheet W 534, for drinking water installations in acc. with DIN 1988. For dimensionally stable concealed and pre-wall installations of manifold and riser pipes in Viega component assembly.Press connectorsAll sizes with SC-Contur – connections, which remain unpressed become visible when the system is filled. The SC-Contur is certified and fulfils the requirements of DVGW worksheet W 534, point 12.14, connectors with forced leakage.During leakage tests with water, Viega guarantees the identification of unpressed connections in the pressure range 0.1 MPa–0.65 MPa, in the case of a dry leakage test with compressed air or noble gases from 22 hPa–0.3 MPa.MarkingGreen dot on the press connectionSealing elementsEPDM, black (ethylene

Press connector system with press connectors and pipes made of stainless steel material Nos. 1.4401 and 1.4521 in acc. with DIN EN 10088, DIN EN 10312, DVGW worksheet GW 541, system certification for connectors and pipes in acc. with DVGW worksheet W 534, for drinking water installations in acc. with DIN 1988. For dimensionally stable concealed and pre-wall installations of manifold and riser pipes in Viega component assembly.Press connectorsAll sizes with SC-Contur – connections, which remain unpressed become visible when the system is filled. The SC-Contur is certified and fulfils the requirements of DVGW worksheet W 534, point 12.14, connectors with forced leakage.During leakage tests with water, Viega guarantees the identification of unpressed connections in the pressure range 0.1 MPa–0.65 MPa, in the case of a dry leakage test with compressed air or noble gases from 22 hPa–0.3 MPa.MarkingGreen dot on the press connectionSealing elementsEPDM, black (ethylene-propylene-die

T-piece cst d42-42-42 zn-pl

Viega 2326.1

For cold and hot potable water, For heating water, For cooling water without antifreeze agent, For cooling water with antifreeze agent, For remote network heating water 120 °C, For saturated steam 120 °C, For service water, For ultrapure water (except pharmaceutical water), For rainwater with a pH value of > 6.0, For grey and black water with pH value > 6.0, For extinguishing water (wet), For sprinklers (wet), For chemicals and technical liquids, For compressed air (oil purity class 0–3), For negative pressure, For inert gases (e.g. nitrogen), For industrial gases (e.g. acetylene, shielding gases), For technical building systems, industry and shipbuilding, Application overview: Geberit Mapress Stainless Steel for liquid media, Application overview: Geberit Mapress Stainless Steel for gaseous media.

Viega 2326.1

XPress Carbon reducer FØ 22X54

T-piece cst d22-22-22 zn-pl

Bend cst 45g d35 zn-pl

Press connector system with press connectors made of gunmetal, pipes made of stainless steel material Nos. 1.4401 and 1.4521 in acc. with DINEN 10088, DIN EN 10312, DVGW worksheet GW 541, system certification for connectors and pipes in acc. with DVGW worksheet W 534, for drinking water installations in acc. with DIN 1988. For dimensionally stable concealed and pre-wall installations of manifold and riser pipes in Viega component assembly.Press connectorsAll sizes with SC-Contur – connections, which remain unpressed become visible when the system is filled. The SC-Contur is certified and fulfils the requirements of DVGW worksheet W 534, point 12.14, connectors with forced leakage.During leakage tests with water, Viega guarantees the identification of unpressed connections in the pressure range 0.1 MPa–0.65 MPa, in the case of a dry leakage test with compressed air or noble gases from 22 hPa–0.3 MPa.MarkingGreen dot on the press connectionSealing elementsEPDM, black (ethylene

XPress Stainless threaded T-piece FFF 22XRp1/2X22

Für Sanitäranlagen und Industrie, für Heizsysteme, Kühlung und Industrie.

Bend cst 45g d28 zn-pl

Press connector system with press connectors made of gunmetal, pipes made of stainless steel material Nos. 1.4401 and 1.4521 in acc. with DINEN 10088, DIN EN 10312, DVGW worksheet GW 541, system certification for connectors and pipes in acc. with DVGW worksheet W 534, for drinking water installations in acc. with DIN 1988. For dimensionally stable concealed and pre-wall installations of manifold and riser pipes in Viega component assembly.Press connectorsAll sizes with SC-Contur – connections, which remain unpressed become visible when the system is filled. The SC-Contur is certified and fulfils the requirements of DVGW worksheet W 534, point 12.14, connectors with forced leakage.During leakage tests with water, Viega guarantees the identification of unpressed connections in the pressure range 0.1 MPa–0.65 MPa, in the case of a dry leakage test with compressed air or noble gases from 22 hPa–0.3 MPa.MarkingGreen dot on the press connectionSealing elementsEPDM, black (ethylene

XPress Stainless reduced T-piece FFF 108X88.9X108

Geberit Mapress Edelstahl-Verbindung mit Verbindungsmutter aus CrNi-Stahl: d=22mm, G=1

Viega 2316

XPress Stainless reduced T-piece FFF 76.1X42X76.1

XPress Carbon threaded T-piece FFF 35XRp3/4X35

XPress Stainless reduced T-piece FFF 54X42X54

Für Sanitäranlagen und Industrie, für Heizsysteme, Kühlung und Industrie.

Geberit 20104 Ablauf- und Entlüftungsarmatur (DVW)

VSH T-fitting with sockets 88.9x76.1x88.9 mm, fz

Für Heizungsanlagen, Kühlung und Industrie
Für klimatisch technische Bereiche
Für Sprinkleranlagen (nass)
Nicht geeignet für Trinkwasserleitungen