Druckrohre und Armaturen - Seite 3

Profipress T-Stück mit SC-Contur-Kupferpressverbindern, Komponenten EPDM-Dichtelemente d1: 15, d2: 15, d3: 15

Viega Sanpress Bogen 90° 22 Rotguss/blank, 108120

XPress Carbon elbow 90 deg. FF 35

Geberit 31213 Anschlussteil für Wasserschlauch Schlauchanschluss Edelstahl 1 Stück(e)

Viega 1112

Sanpress Inox Verbindungsschraubfitting mit SC-Contur- Stahl nicht korrodierend - Pressverbindung, G-Gewinde - Flachdichtungskomponenten EPDM-Dichtelement, EPDM-Flachdichtung, Unionsmutter Schraubfitting d: 15, G: 12

Kupplung Cst D35 Zn-Pl

Viega 2428

Viega 2426.1

Viega 2214

Press connector system with press connectors made of copper and gunmetal tested in acc. with DVGW worksheet W 534 with DVGW test seal and pipes made of copper in acc. with EN 1057 in acc. with DVGW worksheet GW 392.Suitable for drinking water installations in acc. with DIN 1988.For dimensionally stable concealed and pre-wall installations of manifold and riser pipes in Viega component assembly.Press connectorsAll sizes with SC-Contur – connections, which remain unpressed become visible when the system is filled. The SC-Contur is certified and fulfils the requirements of DVGW worksheet W 534, point 12.14, connectors with forced leakage.During leakage tests with water, Viega guarantees the identification of unpressed connections in the pressure range 0.1 MPa–0.65 MPa, in the case of a dry leakage test with compressed air or noble gases from 22 hPa–0.3 MPa.MarkingGreen dot on the press connectionSealing elementsEPDM, black (ethylene-propylene-dien-monomer rubber), up to 110 °C

Viega 2611

XPress Carbon reduced T-piece FFF 54X42X54

Für Sanitäranlagen und Industrie, für Heizsysteme, Kühlung und Industrie.

XPress Stainless threaded T-piece FFF 28XRp1/2X28

Prestabo T-Stück mit SC-Contur- verzinktem unlegiertem Stahl- PressverbindernKomponentenEPDM-Dichtelemented1: 22, d2: 18, d3: 22

Viega 1118

Viega 1126

Press connector system with press connectors made of copper and gunmetal tested in acc. with DVGW worksheet W 534 with DVGW test seal and pipes made of copper in acc. with EN 1057 in acc. with DVGW worksheet GW 392.Suitable for drinking water installations in acc. with DIN 1988.For dimensionally stable concealed and pre-wall installations of manifold and riser pipes in Viega component assembly.Press connectorsAll sizes with SC-Contur – connections, which remain unpressed become visible when the system is filled. The SC-Contur is certified and fulfils the requirements of DVGW worksheet W 534, point 12.14, connectors with forced leakage.During leakage tests with water, Viega guarantees the identification of unpressed connections in the pressure range 0.1 MPa–0.65 MPa, in the case of a dry leakage test with compressed air or noble gases from 22 hPa–0.3 MPa.MarkingGreen dot on the press connectionSealing elementsEPDM, black (ethylene-propylene-dien-monomer rubber), up to 110 °C

Viega 2312.1

XPress Carbon elbow 45 deg. FØ 76,1

XPress Carbon Ellenbogen 45 Grad FF 76,1

Geberit 31005 Anschlussteil für Wasserschlauch Schlauchanschluss Edelstahl 1 Stück(e)

Viega 4211

XPress Stainless straight connector FF 22XRp1/2