Druckrohre und Armaturen - Seite 12

Viega 2326.1

Viega 2215.5

Viega 4212

Viega 1118

XPress Stainless reduced T-piece FFF 88.9X42X88.9

Für Heizungsanlagen, Kühlung und Industrie
Für klimatisch technische Bereiche
Für Sprinkleranlagen (nass)
Nicht geeignet für Trinkwasserleitungen

Viega 2211

Sanpress T-piece with SC-Contur- gunmetal or silicium bronze- press connectors, Rp-threadComponentsEPDM sealing elements, polygon, VdS certificationd1: 35, Rp: 12, d2: 35

XPress Stainless axial compensator ØØ 108

XPress Carbon reduced T-piece FFF 22X15X22

Sanpress Inox Adapter with SC-Contur- steel non-corroding- press connection, R-thread Components EPDM sealing element, polygond: 18, R: 34

Sanpress Inox Kupplung mit SC-Contur - nicht korrodierender Stahl - Pressverbinder, Komponenten EPDM-Dichtelemente d: 54 (VdS-Zertifizierung)

Sanpress Inox T-piece with SC-Contur- steel non-corroding- press connectors, Rp-threadComponentsEPDM sealing elements, polygond1: 15, Rp: 12, d2: 15

Viega 2318

Sanpress Inox Adapter elbow 90° with SC-Contur- steel non-corroding- press connection, R-threadComponentsEPDM sealing element, polygond: 15, R: 12

Für Heizungsanlagen, Kühlung und Industrie
Für klimatisch technische Bereiche
Für Sprinkleranlagen (nass)
Nicht geeignet für Trinkwasserleitungen

XPress Carbon slip coupling FF 22

Viega 2217.2

XPress Stainless T-piece FFF 35

T-piece cst d35-22-35 zn-pl

Viega 1116.1

Sanpress Inox Adapter elbow 90° with SC-Contur- steel non-corroding- press connection, Rp-threadComponentsEPDM sealing element .

Viega 2365

XPress Carbon reducer FØ 28X35

Press connector system with press connectors made of gunmetal, pipes made of stainless steel material Nos. 1.4401 and 1.4521 in acc. with DINEN 10088, DIN EN 10312, DVGW worksheet GW 541, system certification for connectors and pipes in acc. with DVGW worksheet W 534, for drinking water installations in acc. with DIN 1988. For dimensionally stable concealed and pre-wall installations of manifold and riser pipes in Viega component assembly.Press connectorsAll sizes with SC-Contur – connections, which remain unpressed become visible when the system is filled. The SC-Contur is certified and fulfils the requirements of DVGW worksheet W 534, point 12.14, connectors with forced leakage.During leakage tests with water, Viega guarantees the identification of unpressed connections in the pressure range 0.1 MPa–0.65 MPa, in the case of a dry leakage test with compressed air or noble gases from 22 hPa–0.3 MPa.MarkingGreen dot on the press connectionSealing elementsEPDM, black (ethylene