Remote RF to VN22758.Can control each of the 3 channels individually on the damper as well as the fade function.

· Dimming of all dimmable lamps - also LED· Only 17.5 · 5-350 W· Max. 10 lamps 10

LED dimmer to RF wireless remote control. Can control 4 LED strips individually and with master on / off.Remote control ordered separately VN22745 (Lemu 7826502756).

The wireless switch is based on the Zigbee protocol. The switch has 4 keys which can be programmed individually. The switch is adapted to the Danish circuit breaker system which means it can be included in the same framework as traditional switches and sockets. The switch does not contain batteries and is therefore maintained-free. When the switch is activated, power is automatically generated so that the pressure is able to send Zigbee telegrams. The switch has been tested to last for 100,000 activations. The pressure is b.la. compatible with Interactiv, Lsense and other EasyAir concepts, and is configured through the associated App.

LED RGB dimmer RF wireless remote control. Can control each of the 3 channels individually on the dimmer as well as the fade function. The remote control is ordered separately VN22757.

CBU-ASD is a wireless control unit for LED and halogen drivers with 0-10V, 1-10V or DALI dimming interface. The control output can be configured either as analog 0-10V (and 1-10V) or digital Standalone DALI control interface. When the output is configured as Standalone DALI 1, CBU-ASD acts both as a controller and as a power supply making it possible to connect directly to an LED driver with DALI interface without the need for an external DALI power supply. This so called Standalone DALI makes it possible to implement multi-channel lighting systems with adjustable color (RGB) or color temperature, while keeping the wiring and number of components at their minimum.CBU-ASD is controlled wirelessly with Casambi smartphone and tablet applications using Bluetooth 4.0 protocol. Devices form automatically a secure wireless mesh network so that a large number of xtures can be controlled from any point. No external gateway module is needed. CBU-ASD can be controlled also from a standard on/o wall switches.

CBU-TED is a Bluetooth controllable, Casambi enabled trailing-edge dimmer for operation of incandescent lamps, dimmable LED lamps and dimmable LED control gear. It can be installed behind a traditional wall switch, inside a luminaire or into a ceiling outlet box. Maximum allowable ambient temperature must be observed. CBU-TED is able to control up to 150 W. The maximum permissible load varies according to di erent load types.CBU-TED can be controlled with Casambi app, available for iOS and Android devices, as well as with traditional wall switches. The Casambi app can be downloaded free of charge from Apple App Store and Google Play Store.Di erent Casambi enabled products can be used as a simple one luminaire direct control to a complete and full featured light control system where up to 127 units form automatically an intelligent mesh network.

SIMPLE: connection without neutral, flush-mounted model requires no connections back to the electric panel for pushbuttons or lamps, 100% quiet operation, Soft start/stop feature preserves the life of your light bulbs

Wireless and wired electronic dimmer for installation with soft start / soft stop, phase controlled, ohmic load max 2A in ventilated box and max 300w in smaller sealed box / can, Max. load for dimmable LED 1A (see data sheet for dimming LED), 230VAC (+ 10% -15%) 50Hz, temperature environment -20 - +40 , dimensions 37mm x 35mm x 12mm, electronic protection.

This dimmer is suitable for dimming LED strips and LED lamps. An app controlled device that is attenuated using ZigBee HUB e.g. Philips Hue.Philips Hue convertible.

Wireless LED RGBW remote control for LED RGBW dimmer VN22760.The remote control can control each of the 4 channels individually on the dimmer as well as play / pause 10 built-in programs.The dimmer is ordered separately VN22760.

A wireless remote controlled wall module. A 2-KIP push connector that fits in a FUGA Back Box.Convert Push switch to a wireless remote controlled KIP Push.Fits a VN22768 LED Dimmer 4CH x 5A.

Remote control RF for VN22742. Can dim each of the 4 channel on the dimmer.

Input voltage: 12-24VDCOutput voltage: 12-24VDCOutput current: 1CHx20AAttenuation: DALI, KIP, 0 / 1-10V or Phase Cut.Multifunction 4 in 1 LED Dimmer, with DALI, AC push, 0/1-10V and Phase Cut dimming interfaces.Dip switch to select different dimming interfaces.1 channel 12-36VDC output, max. 20A.Supports both leading edge and trailing edge dimming input.Complies to DALI standards IEC 62386-102, IEC 62386-207.Match all DALI systems in the market.1 DALI address assigned by DALI master.Compatible with universal phase cut dimmers.To work with power repeater to expand output power unlimitedly.

Universal dimmer for installation in PL enclosure.The dimmer can dim from 1 - 200W with a number of connected button pressures.

· Dimming of all dimmable light sources - also LED lamps· Only 17.5 mm· 5-350 W· All-off function· Suitable for use in houses with intelligent systems· Max. 10 lamps 10-330-00

Universal RLC dimmer, resistive/inductive/capacitive loads up to 1400 VA

Smart Gateway is not required for a SG SMART installation to work. The Smart Gateway offers a number of additional benefits that are almost indispensable. Smart Gateway installation takes place almost automatically as it just needs to be connected via Ethernet cable to the internet router, it also automatically pops up in the SG SMART App the next time it opens - Plug & PlayExtra benefitsWifi communication ensures fast commands and always on5 programmable Astro watches that are easily set via the SMART AppVoice control and integration with other systems via Siri, Apple HomeKit / Google Home and Amazon AlexaExternal control of all SMART devices in multiple locationsNotifications that can tell you if the light is switched on when you are not at home. Geotagging via Apple HomeKit or Goggle Home.Gateway is always recommended in combination with LEDDim Smart DIN - but of course also in connection with other products. It is only necessary to have 1 Gateway per location

This dimmer is suitable for dimming LED strips and LED lamps. An app controlled device that is attenuated using ZigBee HUB e.g. Philips Hue.Philips Hue convertible.

The controller can expand the power output from, RGB controllers, DALI control, dimmer and other Develtron products.This modul can increase the power output with an additional 4x100W from Develtron controllers.Additional power supplies is needed..

This dimmer er is suitable for dimming LED strips and LED lights. Mute with potential-free pressure at the entrance.A transfer relay can also be mounted on the input so that the dimming can be controlled from 230Vac.

This dimmer is suitable for dimming LED strips and LED lights. Mute with potential-free pressure at the terminal.A transfer relay can also be mounted on the input so that the dimming can be controlled from 230Vac.