CPU Kühler - Seite 10

Corsair XTM70 - Kühlpaste

Lian Li Hydroshift II LCD-C 360TL Wireless White - CPU-Wasserkühlung - Max 28 dBA

Cooler Master Hyper 212 3DHP ARGB - CPU-Luftkühler

Thermal Grizzly Minus Pad Pro - 100x100x1.5 mm - Thermoplatte

The electrically non-conductive Minus Pad Advanced thermal pads are part of the Minus Pad Basic, Advance, and Pro series. Based on the proven minus pad 8, this series has been specifically further developed to significantly improve thermal conductivity, compressibility, and price-performance ratio. The thermal pads are suitable for SSDs, GPU coolers, GPU water coolers, as well as electronic components such as voltage regulators and memory modules.

• Excellent thermal conductivity


• High compressibility


• Easy to use


• Electrically non-conductive

Comparison of the Minus Pad Basic-, Advance-, and Pro series:

• Minus Pad Basic: Good thermal conductivity, slightly lower compressibility, and excellent price-performance ratio.


• Minus Pad Advance: Improved thermal conductivity, higher compressibility.


• Minus Pad Pro: Outstanding thermal conductivity and exceptional compressibility – at a slightly higher Price.
   

Thermal Grizzly Putty Advance 30 g - Kühlpaste

Thermal putty that serves as an electrically non-conductive, flexible gap filler for replacing thermal pads on GPUs and compensates for height differences from 0.2 to 3.0 mm.

TG Putty is easy to apply with the supplied spatulas or by hand (gloves recommended) and is available in Basic, Advance and Pro variants that differ by thermal conductivity.

• Electrically non-conductive alternative to conventional thermal pads


• Fills gaps from 0.2–3.0 mm for VRAM, VRM and SMD components


• Apply broadly with spatulas or shape into small pellets for precise placement


• Not suitable for use on processors (IHS or Direct Die) or directly on the GPU die


• Operating temperature range −40°C to +120°C


• Advance variant includes three spatulas for application

Designed for GPU modifications and cooler conversions, it adapts to varied factory pad thicknesses for tailored thermal contact.

be quiet! PURE LOOP 3 LX 360 - CPU-Wasserkühlung

DeepCool LT360 ARGB - CPU-Wasserkühlung

Arctic Freezer 8A - CPU-Luftkühler

be quiet! SILENT LOOP 3 360MM - CPU-Wasserkühlung - Max 38 dBA

Arctic MX-7 (4 g) with 6 pcs MX Cleaner - Kühlpaste

High performing thermal paste with 6 × MX Cleaner included

• Content: 4 g
• Viscosity 35000 – 38000 Poise
• Density 2.9 g/cm³
• Continuous Use Temperature -50 – 250 °C
• Volume Resistivity 1.7 × 1012 Ω-cm
• Breakdown Voltage 4.2 kV/mm

Arctic have over 20 years of experience in the PC cooling market the MX-7 was developed with the goal to offer a first-class product at a fair price. The optimized formula is based on the proven MX-6, one of the best-selling thermal pastes in the world.

Thermalright Peerless Assassin 120 Mini - Weiß - CPU-Luftkühler - Max 26 dBA

Arctic MX-7 (8 g) - Kühlpaste

High performing thermal paste 

• Content: 8 g
• Viscosity 35000 – 38000 Poise
• Density 2.9 g/cm³
• Continuous Use Temperature -50 – 250 °C
• Volume Resistivity 1.7 × 1012 Ω-cm
• Breakdown Voltage 4.2 kV/mm

Arctic have over 20 years of experience in the PC cooling market the MX-7 was developed with the goal to offer a first-class product at a fair price. The optimized formula is based on the proven MX-6, one of the best-selling thermal pastes in the world.

Thermal Grizzly Liquid Metal Applicator - 3 pcs - Kühlpaste

NZXT Kraken Plus 240 (Black) - CPU-Wasserkühlung - Max 32 dBA

Thermal Grizzly Minus Pad 8 - 100 x 100 x 3.0 mm

Wärmeleitpads bieten hohe Wärmeleitfähigkeit mit einer sehr elastischen, flexiblen Oberfläche, die selbst kleinste Spalten zwischen Komponenten ausgleichen soll.

Thermal Grizzly Minus Pad 8 lässt sich leicht verarbeiten und mit leichtem Druck anbringen. Es nutzt eine keramische Silikon-Formel und Nano-Aluminiumoxid, um eine konstante, optimale Wärmeübertragung in vielen Größen und Stärken zu unterstützen.

• Hohe Wärmeleitfähigkeit
• Hohe Kompressibilität
• Elektrische Isolierung
• RoHS-konform

Zuverlässiger Kontakt und effizienter Wärmetransfer helfen, empfindliche Komponenten thermisch verbunden und stabil zu halten.

ASUS ROG STRIX LC III 360 ARGB LCD - Black - CPU-Wasserkühlung

DeepCool LE360 V2 - CPU-Wasserkühlung

CPU-Flüssigkeitskühler mit 360 mm Aluminiumradiator, drei 120 mm ARGB-Hydro-Bearing-Lüftern, Anti-leak Tech-Pumpe mit Dreiphasenmotor und umfassender Intel/AMD-Sockelkompatibilität.

DeepCool LE360 V2 kombiniert eine Kupfer-Kühlplatte, adressierbare RGB-Beleuchtung und einen 410 mm Schlauch, um in moderne Builds zu passen, während das mitgelieferte Montagekit die Installation vereinfacht.

• Radiatorgröße: 360 mm (402 × 120 × 27 mm)


• Drei 120 mm Lüfter, 500–2100 rpm, 75.89 cfm Luftdurchsatz, 31.6 dBA Geräusch


• Hydro Bearing-Lüfter mit 4‑pin Lüfter- und 3‑pin ARGB-Anschlüssen


• Pumpenfunktionen: Anti-leak Tech, Dreiphasenmotor, 4‑Pol Lüftermotor


• Kühlplattenmaterial: Kupfer; Radiatormaterial: Aluminium


• Kompatibel mit LGA1851, LGA1700, LGA1200, LGA1151, LGA1150, LGA1155, AM4 und AM5

Ermöglicht 360 mm Wärmeabfuhr, adressierbare RGB-Beleuchtung und ein beiliegendes Montagekit für einfache Integration in kompatible PC-Systeme.

Xilence Performance C Series - CPU-Luftkühler - *DEMO*

Fractal Design Lumen S24 V2 RGB - CPU-Wasserkühlung

Thermal Grizzly Putty Basic 100g - Thermoplatte

Gap filler for GPUs that replaces thermal pads and remains thermally conductive across an operating range of -40°C to +120°C.

The TG Putty is a thermally conductive putty designed to fill gaps on graphics cards and is offered in Basic, Advance and Pro variants in 30 g or 100 g sizes.

• Thermally conductive gap filler intended as a replacement for GPU thermal pads


• Operating temperature range: -40°C to +120°C


• Available variants: Basic, Advance, Pro


• Available contents: 30 g and 100 g


• Technical datasheet provided for detailed specifications

Practical for bridging uneven contact areas between GPU components and heatsinks to maintain thermal contact where pads are unsuitable.

Thermal Grizzly KryoSheet thermal pad - 25 x 25 mm - Thermoplatte

The graphene thermal pads of the Thermal Grizzly KryoSheet series can be used as an excellent alternative for thermal compounds from the higher performance segment. Similar to Carbonaut pads, they have a conformable surface with very high thermal conductivity. Compared to Carbonaut pads, KryoSheet as a high-end product offers significantly higher thermal conductivity.

This increased thermal conductivity is not only due to the choice of material, but also to the innovative manufacturing process. KryoSheet does not contain any liquid components and is therefore not subject to normal ageing as is the case with traditional thermal paste. Drying out is not possible.

• Outstanding thermal conductivity


• Easy to use


• Consistently high performance


• Extreme durability
  
  

Noctua NH-D9L chromax.black - CPU-Luftkühler - Max 23 dBA

Arctic MX-6 - thermal paste - 4 g - Kühlpaste

ASUS ProArt LC 360 - CPU-Wasserkühlung - Max 40 dBA

Arctic Liquid Freezer III Pro 280 A-RGB (White) - CPU-Wasserkühlung