Bosch - Seite 178

The HSS spiral drill PointTeQ with a hexagonal shaft provides fast results when drilling in metal. As it is developed for fast drilling, it generates minimal heat with reduced wear on the drill bit, and the PointTeQ tip ensures consistent sharpness and long durability. The self-centering tip prevents wandering and ensures quick and easy starting, and the black oxide channel quickly removes chips. The hexagonal shaft makes the drill very stable with a secure locking between the drill bit and chuck, which strengthens the core of the drill bit and reduces the risk of breakage for bits with a diameter under 6 mm, thereby achieving even greater reliability. This PointTeQ drill is suitable for drilling in alloyed and non-alloyed steel, non-ferrous metals, cast steel, cast iron, and plastic. With HSS spiral drills PointTeQ active cutting is achieved along with perfect centering thanks to its two-part tip design. It is type N (drill point) with 135° point angle manufactured according to DIN 338 standards. It is compatible with 1/4 inch hexagonal shank systems for use with impact wrenches , screwdrivers ,and drilling machines .

Bohrer, Spiralbohrer, 4,2 mm, H8, zylindrisch, Länge: 75 mm

The long ground HSS spiral drill bit for drilling deep holes through metal with maximum precision. Its length allows for deep drilling with this long drill head. The drill head's exposed 135-degree two-part self-centering tip combines active cutting with perfect centering without displacement for maximum precision. With the two-part tip, it is also unnecessary to mark pilot holes in advance or pilot bore up to 10 mm. This precision-ground drill head, made of HSS (high-speed steel), provides up to 40% faster drilling and up to 50% lower clamping pressure than standard ground HSS cutting edge drill heads. The long ground HSS spiral drill bit is manufactured according to DIN 340. The drill head is of type N (not angle) with a 135-degree tip and a diameter tolerance of h8. This drill head is designed for drilling deep holes in alloyed and non-alloyed steel, cast steel, cast iron, sintered iron, reduced cast iron, non-ferrous metals and hard plastic. It has a cylindrical shaft system (the shaft has the same diameter as the drill head) and is intended for use in boring stands and screwdrivers
Package with one piece.

The long ground HSS spiral drill bit for drilling deep holes through metal with maximum precision. Its length allows for deep drilling with this long drill head. The exposed 135-degree two-part self-centering tip of the drill head combines active cutting with perfect centering without displacement for maximum precision. With the two-part tip, it is also unnecessary to mark pilot holes in advance or pilot bore up to 10 mm. This precision-ground drill head, made of HSS (high-speed steel), provides up to 40% faster drilling and up to 50% lower clamping pressure than standard ground HSS cutting edge drill heads. The long ground HSS spiral drill bit is manufactured according to DIN 340. The drill head is of type N (not angle) with a 135-degree tip and a diameter tolerance of h8. This drill head is designed for drilling deep holes in alloyed and non-alloyed steel, cast steel, cast iron, sintered iron, reduced cast iron, non-ferrous metals and hard plastic. It has a cylindrical shaft system (the shaft has the same diameter as the drill head) and is intended for use in drilling stands and screwdrivers
Package contains one piece.

Schraubendreher- und Bohrer-Bitsatz, für Holz, Metall, Stein, torx, phillips, pozidriv, hex, slot, Länge: 50 mm, 25 mm

Multitool-Klinge, für Mörtel, 70 mm

Long Life Cutting Holes in Stainless Steel
Exceptional durability is built in with Bosch Carbide Technology.
Individually ground teeth made from fine, hard Carbide.
With integrated thread.

DN80/125 Abgasrohr, konzentrisch - 1 m

Lochsäge, für Ziegelsteine, Spanplatte, Weichholz, glasfaserverstärkter Kunststoff, weiche Fliesen, 70 mm

Bohrer, für Beton, Kunststoff, Stahl, Weichholz, weiche Fliesen, Multimaterial, 3.5 mm, zylindrisch, Länge: 70 mm

Bohrer, für Beton, Kunststoff, Stahl, Weichholz, weiche Fliesen, Multimaterial, 12 mm, Länge: 150 mm

Schleifwalze, Körnung: P240, 115 mm x 5 m

Lochsäge, für Ziegelsteine, Spanplatte, Weichholz, glasfaserverstärkter Kunststoff, weiche Fliesen, 114 mm

Abrundfräser, für Holz, Round over, 38.1 mm, Länge: 61 mm

Bohrer, für Beton, Kunststoff, Stahl, Weichholz, weiche Fliesen, Multimaterial, 5.5 mm, zylindrisch, Länge: 85 mm

Bosch Schrauberbit extra-hart. Anzahl der bits: 25 Stück(e), Schraubendreher-Bits enthalten: Pozidriv, Pozidriv Schraubendreher-Bits: PZ 2. Länge (mm): 25 mm. Schaftgröße: 25,4 / 4 mm (1 / 4"), Schaftform: Hexagonal, Verpackungsart: Polybag• S2-modifizierter Stahl und optimierter Wärmebehandlungsprozess für überdurchschnittliche Härte und angemessene Leistung• Die konische Torsionszone des Bits verarbeitet Drehmomentspitzen gut, und bewältigt Aufgaben aller Art• Sechskantschaft für eine starke Verbindung und maximale Drehmomentübertragung in Dreibackenfuttern und 1/4-Zoll-Innensechskant-Werkzeughaltern• 25 Stück(e)• Pozidriv• Material: Stahl• Schaft

Schleifscheibe, für Metall, Edelstahl, 115 mm, X-LOCK, M14, rund, Körnung: 120

Bohrer, für Beton, Stahlbeton, Granit, Festbeton, Gneis, Hammereinsatz, 5.5 mm, SDS-plus, Länge: 315 mm

Exzenterschleifer, 750 W, 150 mm

Bosch Professional 8,5 mm Kamerakopf (120 cm) Zubehör, Display-Auflösung: 320 x 240 px

Bosch PRO Stainless Steel HSS-Co Spiralbohrer. Vorgesehene Verwendung: Bohrer, Rotationshammer, Bohrerart: Spiralbohrer-Bit, Bohrdurchmesser: 1,15 cm. Anzahl der Bohrer-Bits: 5 Stück(e)• Herausragende Lebensdauer in Edelstahl• Hochgeschwindigkeitsstahl mit zusätzlichem Kobaltmaterial für langanhaltende Leistung• Zylindrischer Schaft eignet sich für Zahnkranzbohrfutter• Kann in altem Design geliefert werden• Spiralbohrer-Bit• Bohrdurchmesser: 1,15 cm• Länge (mm): 142 mm• Geeignet für Materialien: Metall, Edelstahl, Stahl• Zylinderförmige Welle• Bronze• 5 Stück(e)

Precise measurements up to 40 m with app-connected documentation

Sägeblatt, für Porenbeton, Länge: 400 mm, Breite: 22 mm

Bosch 2 607 002 560. Anzahl der bits: 8 Stück(e), Schraubendreher-Bits enthalten: Phillips, Phillips Schraubendreher-Bits: PH 1, PH 2, PH 3. Länge (mm): 25 mm. Schaftgröße: 25,4 / 4 mm (1 / 4")• S2-modifizierter Stahl und optimierter Wärmebehandlungsprozess für überdurchschnittliche Härte und angemessene Leistung• Die konische Torsionszone des Bits verarbeitet Drehmomentspitzen gut, und bewältigt Aufgaben aller Art• 8 Stück(e)• Phillips• Tragetasche• Schaft

Bohrer, für Beton, Kunststoff, Stahl, Weichholz, weiche Fliesen, Multimaterial, 10 Stücke, 5 mm, zylindrisch, Länge: 85 mm