Bosch - Seite 159

Topf-Drahtbürste für Bohrmaschinen mit gezopftem Draht, 70 mm Durchmesser, 0.3 mm Drahtstärke, 6 mm Schaft und max. 4500 U/min für Arbeiten an Eisenmetallen und Bewehrungsstahl.

Topf-Drahtbürsten für Bohrmaschinen – gezopfter Draht, 70 mm ist für die Bohrmaschinenmontage ausgelegt und ermöglicht kontrolliertes Bürsten zur Materialreinigung und Oberflächenvorbereitung, mit den aufgeführten Spezifikationen zu Durchmesser, Drahtstärke, Schaftgröße und maximaler Drehzahl.

Diamant-Bohrersatz, für Keramik, 4 Stücke, 6 mm, 8 mm, 10 mm, 12 mm, M14

The Speedline Wood circular saw blade provides precise length and cross-sections in all types of wood. Its high-quality precision-ground carbide teeth make the blade strong enough for fast cutting, while its core blade, made of dimensionally stable SK5 hardened steel (> 40 HRC), ensures accuracy. At the same time, the expansion slots on the blade reduce vibration during use, which reduces noise and heat development. This saw blade is used in all types of wood and wood materials. The Speedline Wood circular saw blade provides precise length and cross-sections in all types of wood. It is compatible with handheld saws and table saws.

For use with bayonet saws with a universal shaft system of 0.5". The S 3456 XF Progressor for Wood and Metal bayonet saw blade provides powerful and fast cuts in thick and thin materials. The progressively increasing tooth height provides strong, fast cuts in materials with a range of different densities, while the teeth are specially developed for use in many different types of wood and metal, including aluminum. In addition, the medium-thick blade material (1.25 mm) provides optimal balance between speed, flexibility, and stability during use. This bayonet saw blade is made from BIM (bimetal) and is optimized to cut through soft nails, soft steel, and iron-free metal components embedded in wood. It has a standard length of 200 mm with a cutting capacity of up to 150 mm.
S 3456 XF
BIM laid out milled
Wood with nails/metal , chipboard (<150mm), sheet metal plates , aluminum profiles (3-18mm), GFK/Epoxy (<150mm)

The flat wire staples fit staple guns from the following brands: Arrow, Black+Decker, Bosch, Bostitch, Emhard, Esco, kwb, Maestri, Mekano, Outifrance Peugeot Rapid and Rocafix. The flat wire staples type 57 are ideal for a multitude of general stapling tasks and can be used on many different materials. They easily handle both DIY tasks and professional purposes on thin paper and cardboard, foils labels paper etc. The staples have a narrow back that allows them to penetrate deeply into the material and provide a good grip with a very discreet staple back. They are particularly suitable for stapling thin materials where the staple back must not be pressed into the material.
Clamps with D-tip'

Stichsägenblatt, für Kunststoff, Aluminium, Konstruktionsholz mit Mörtel und Nägeln, stahlverstärktes Holz, robuster Stahl, 3 Stücke, T-Schaft, Länge: 132 mm

Lochsäge, für Stahlplatten, Edelstahlbleche, 35 mm

Schleifplatte, für Mehrzweckanwendungen, Weichholz, Hartholz, faserverstärkte Kunststoffe, glasfaserverstärkter Kunststoff, Farbe auf Holz, Delta, Körnung: 60, 116 mm x 116 mm

Bohrer, für Beton, Stahlbeton, Vollziegel, Betonblocksteine, Kalksandstein, Kalkstein, 18 mm, SDS-max, Länge: 340 mm

The C410 Standard for Wood and Paint is characterized by a high material removal rate when hand sanding wood and paint. This universal hand sanding product ensures smooth and consistent material removal thanks to its robust abrasive surface coated with semi-open aluminum oxide grains. In addition, the electrostatically open surface allows for good dust extraction, preventing clogging and ensuring effective sanding and clean surface results. Intended for all types of hand sanding of wood, wood-based materials, veneers as well as solid surfaces, it is suitable for intermediate sanding of lacquer on surfaces and rounded edges. Also ideal for roughening and grinding down paint, lacquer, putty as well as roughening and fine grinding feather edges, primer coats or putty. The blade is covered with strong semi-open aluminum oxide abrasive grains that ensure uniform surface quality. The electrostatically open coating ensures consistent material removal. Additionally the abrasive grain is attached using a fully synthetic resin bond on C-weight backing material which provides good flexibility and optimal grinding properties.The C410 Standard for Wood & Paint Sandpaper Roll can be torn into appropriate pieces making it suitable to use with hand-sanding blocks

Kernschneidadapter mit Bohraufsatz, SDS-plus

Schleifpapier, für Hartholz, Farbe auf Holz, 50 Stücke, rechteckig, Körnung: P40, 93 mm x 186 mm

Messerset (Packung mit 2)

Bohrer/Schrauber, schnurlos, 2 Geschwindigkeiten, Bohrfutterschlüssel 10 mm, 32 N·m, 2 Akkus, Ladegerät enthalten, 18 V

Tauchsägenschneidblatt, für Metall, Schneiden von Bewehrungsstahl, Edelstahl, Stahl, Fensterbauschrauben, gehärtetes Metall, Länge: 90 mm, Breite: 20 mm

Bohrer, für Beton, Stahlbeton, Granit, Festbeton, Gneis, Hammereinsatz, 5.5 mm, SDS-plus, Länge: 315 mm

Sägeblatt, für Porenbeton, Länge: 400 mm, Breite: 22 mm

Gras-/Strauchschere, schnurlos, 18 V, 2 Ah, 20 cm, Zahnteilung: 8 mm, 1.45 kg

Schraubendreher, TX25

Rundbürste, für Nickel, Baustahl, Zink, 75 mm

Schleifpapier, für Holz, Trockenbauwand, Weichholz, Hartholz, Farbe, furniertes Holz, 50 Stücke, rechteckig, Körnung: 220, 93 mm x 186 mm

Sägeblatt, für Brennholz, nicht abrasive Holzmaterialien, feuchtes Holz, 25 Stück, Länge: 240 mm, Breite: 19 mm

Bosch 2 608 577 170 Bohrer Spiralbohrer-Bit 1 Stück(e)

Bohrer, für Beton, Kunststoff, Stahl, Weichholz, weiche Fliesen, Multimaterial, 9 mm, zylindrisch, Länge: 120 mm