Bosch 2609256905 1 pc(s)

The HSS spiral drill with PointTeQ allows for fast drilling in metal thanks to the design of the tip with PointTeQ. It is quick and easy to start drilling as the self-centering tip prevents wandering. Due to the increased drilling speed, less heat and wear are generated. The PointTeQ tip design ensures that it remains sharp and has a long lifespan. This drill is suitable for drilling in alloyed and non-alloyed steel, non-ferrous metals, cast steel, cast iron, and plastic. There is low risk of breakage, especially for drills with a diameter under 6 mm as they are made with an extremely flexible core. Its black oxide coating ensures fast chip removal. The HSS PointTeQ spiral drill is manufactured according to DIN 338 standards. The drill type is N (angle of flute) with a 135-degree point angle. It has a cylindrical shank system (the shank has the same diameter as hammer drills) and is intended for use in pillar drills or screwdrivers.
Pack of 10 pieces.

Bohrer, für Beton, Mauerwerk, Stahlbeton, 14 mm, SDS-max, Länge: 540 mm

Der Griff macht es sicher, mit einem Bohrhammer zu arbeiten.
Griffe für Bohrhämmer

Parallelwinkel

Socket spanner set in SW7, SW8, SW10 and SW13 diameter with an 1/4" hex shank

Hartmetallbestückte Lochsäge mit 73 mm Durchmesser zum Bohren in Stein- und Mauerwerksmaterialien einschließlich Fliesen, Keramik, Dachziegel, Marmor und Bodenfliesen.

Hartmetallbestückte Lochsäge ist für den Einsatz auf Steinoberflächen wie Ziegelwerk, Klinker, Feuerstein und Keramikfliesen spezifiziert, mit einem 73 mm Schneiddurchmesser für eine gleichmäßige Lochgröße.

Sie sind für die Verwendung mit der Parallelführung 2 607 001 387 und dem Fräskreisschneider 2 609 200 143 vorgesehen und eignen sich für Router. Die extra langen Führungstangen verlängern sich bei Bedarf auf bis zu 800 mm.
Führungstange

DN80/125 Elbow, concentric - 87°

Bosch 2 609 390 591 drill attachment accessory Hole saw adaptor

Schleifgürtel, für Holz, 3 Stücke, Körnung: 100, 75 mm x 480 mm

The fine wire staples fit staple guns from the following brands: AEG, Arrow, Black+Decker, Bosch, Esco, kwb, Maestri, Mekano, Metabo, Neckermann/Bullcraft Novus Outifrance Piranha Rocagraf Stanley Skil and Wolfcraft. The fine wire staples type 53 are ideal for a multitude of general DIY tasks and professional stapling jobs. They are suitable for a wide range of thin materials such as fabrics paper flat wooden strips and wire mesh fences. In addition the staples are particularly suitable for purposes where the staple back should not be pressed into the material. The staples have a narrow back that allows them to penetrate deeply into the material and therefore provide good grip with a very discreet staple back

Dübelmarkierer-Set für Ø 6 mm, von Bosch.

Bosch Dowel Setter Set for Ø 6 mm ist für die Verwendung mit Dübeln mit 6 mm Durchmesser ausgelegt und wird mit einer 6 mm Durchmesser-Spezifikation aufgeführt.

3D Structure• 3 dimensional structure ensures grit deep in the fleece works its way to the working surface for a consistent cut over the product lifetime.Cross-laying Technology• Consistent cut and finish with cross-laying technology, a manufacturing technique that ensures high penetration of grits for a long lifespan.Specifications:Dimensions mm: 152 x 229Grade: Extra cut SProduct colour: black.

Bohrer, für Beton, Mauerwerk, Hammereinsatz, 14 mm, SDS-plus, Länge: 165 mm

Bohrer, für Beton, Mauerwerk, 12 mm, SDS-plus, Länge: 165 mm

Bohrer, für Beton, Mauerwerk, Stahlbeton, 10 Stücke, 10 mm, SDS-plus, Länge: 265 mm

Bohrer, für Beton, Mauerwerk, 18 mm, SDS-plus, Länge: 450 mm

Bosch Schrauberbit extra-hart

Schraubendreher-Bit, 100 Stücke, 1/4", phillips, PH2, Inbus, Länge: 25 mm

Bosch Schrauberbit extra-hart

Bohrer, für Spanplatte, Weichholz, Spanplatte, Forstnerbohrer, 12 mm, Inbus, Länge: 400 mm

The drill bit has a hexagonal shaft system and is compatible with all screwdrivers with a 13 mm chuck. The spiral drill bit is suitable for quick and precise drilling when drilling through holes, pre-drilling for rafter nails, and drilling deep dowel holes in wood. The powerful self-feeding tip pulls the bit all the way through, ensuring fast and precise drilling with low power consumption. The optimized low-friction geometry of the bit with solid core ensures straight holes, high chip removal, and higher working speed. The optimized guide edge of the bit and precision-ground head cutting edge produce precise holes. Suitable for use in construction trades, by carpenters and roofers, it is suitable for both softwood and hardwood
Total length 600 mm