Schleifgürtel, für Holz, 3 Stücke, Körnung: 220, 65 mm x 410 mm

Schleifgürtel, für Holz, Metall, Spanplatte, Hartholz, Bauplatte, rechteckig, Körnung: 150, 65 mm x 410 mm (Packung von 3 )

Staubkasten für Kreissägen
Passt zu PKS 55 A; PKS 66 A; PKS 66 AF.

Bosch 2 609 256 417 angle grinder accessory Cutting disc

Kreissägeblatt, für Holz, 235 mm, 24 Zähne

Diamant-Trennscheibe mit segmentiertem Rand, ausgelegt zum Schneiden von Beton, mit 230 mm Scheibendurchmesser, 22 mm Bohrung, 7 mm Segmenthöhe und 2.4 mm Schnittbreite.

Bosch Diamond Cutting Disc Concrete ist eine Diamantscheibe mit segmentiertem Rand, geeignet für Beton und Stahlbeton, und ist kompatibel mit Bosch PWS 1900 und PWS 2000-230 JE.

The HSS spiral drill with PointTeQ allows for fast drilling in metal thanks to the shape of the tip with PointTeQ. It is quick and easy to start drilling, as the self-centering tip prevents wandering. Due to the increased drilling speed, less heat and wear are generated. The PointTeQ tip design ensures that it remains sharp and has a long lifespan. This drill is suitable for drilling in alloyed and non-alloyed steel, non-ferrous metals, cast steel, cast iron, and plastic. There is low risk of breakage, especially for drills with a diameter under 6 mm since they are made with an extremely flexible core. Its black oxide coating ensures quick chip removal. The HSS PointTeQ spiral drill is manufactured according to DIN 338 standards. The drill type is N (notched angle) with a 135-degree point angle. It has a cylindrical shank system (the shank has the same diameter as hammer drills) and is intended for use in drill stands and screwdrivers.
Package of 10 pieces.

The step drill bit head is made of HSS (high-speed steel) and coated with AlTiN (aluminum titanium nitride). This provides the longest possible lifespan and does not require the use of coolant. Laser-marked numbers in both spiral flutes provide highly visible and durable marking of the hole diameter. In addition, the 3-flat shank prevents slipping in the drill chuck and provides efficient transmission with high torque. The HSS step drill bit head delivers smooth, burr-free drilling in multiple diameters with a single drill bit. It is ideal for deburring, drilling round holes, and enlarging existing ones. It is not necessary to mark center points because the two-part tip provides easy starting. Its CNC-ground spiral flute allows for optimized chip removal and less vibration for smooth drilling. The most optimal cutting and absolute smoothness are ensured thanks to axial and radial clearance grinding. This step drill bit is suitable for use on thin materials such as non-ferrous metals, sheet plastic, sheet steel, plastic, and stainless steel.
9 steps Ø 4-5-6-7-8-9-10-11-12 mm

The holder-mounted countersink drill, countersinks and edge mills effectively in a single step in wood. The countersink is mounted on a dowel drilling head, solves all three tasks in an inexpensive and efficient way, and guarantees impressive results. The countersink is suitable for hard and soft wood, laminated and non-laminated chipboards and plywood. This multifunctional bit, made of tool steel, has a 90-degree chamfer angle, five cutting edges, and can also be used as a depth stop. Comes with hex key; dowel drilling head not included. The countersink is intended for drill stands and screwdrivers.

The HSS spiral drill with PointTeQ allows for fast drilling in metal thanks to the design of the tip with PointTeQ. It is quick and easy to start drilling as the self-centering tip prevents wandering. Due to the increased drilling speed, less heat and wear are generated. The PointTeQ tip design ensures that it remains sharp and has a long lifespan. This drill is suitable for drilling in alloyed and non-alloyed steel, non-ferrous metals, cast steel, cast iron, and plastic. There is low risk of breakage, especially for drills with a diameter under 6 mm as they are made with an extremely flexible core. Its black oxide coating ensures quick chip removal. The HSS PointTeQ spiral drill is manufactured according to DIN 338 standards. The drill type is N (angle of flute) with a 135-degree point angle. It has a cylindrical shank system (the shank has the same diameter as hammer drills) and is intended for use in pillar drills or screwdrivers.
Pack of 5 pieces.

The step drill bit is made of HSS (high-speed steel) and provides a long lifespan when used with coolant. Laser-marked numbers on both flutes provide highly visible and durable marking of the hole diameter. Additionally, the 3-flat shank prevents slipping in the drill chuck and provides efficient transmission with high torque. The HSS step drill head delivers smooth, burr-free drilling in multiple diameters with a single bit. It is ideal for deburring, drilling round holes, and enlarging existing ones. No center punch is needed because the split point allows for easy starting. Its CNC-ground flute enables optimized chip removal and less vibration for smooth drilling. The most optimal cutting edge and absolute smoothness are ensured thanks to axial and radial relief grinding. This step drill bit is suitable for use on thin materials such as non-ferrous metals, sheet plastic, sheet steel, plastic, and stainless steel.
9 steps Ø 4-5-6-7-8-9-10-11-12 mm

The flat drill is made of hardened steel with a centering point for precise drilling. The adjustable flat drill ensures high flexibility when drilling. The flat drill has a wedge-shaped blade with a screw for locking and feeding, which can be adjusted from 15-45 mm. The flat drill is ideally suited for general drilling tasks where larger holes of different diameters are required. The drill is suitable for medium-hard and soft wood as well as lighter building materials and wood panels.
Adjustable flat milling cutter, Ø 15 - 25 mm, Ø 25 - 45 mm

The drill bit has a hexagonal shaft system and is compatible with all screwdrivers with a 13 mm chuck. The spiral drill bit is suitable for quick and precise drilling when drilling through holes, pre-drilling for rafter nails, and drilling deep dowel holes in wood. The powerful self-feeding tip pulls the bit all the way through, ensuring fast and precise drilling with low power consumption. The optimized low-friction geometry of the bit with solid core ensures straight holes, high chip removal, and higher working speed. The optimized guide edge of the bit and precision-ground head cutting edge produce precise holes. Suitable for use in construction trades, by carpenters and roofers, it is suitable for both softwood and hardwood
Total length 160 mm

C430 Expert for Wood and Paint has an impressively long lifespan when sanding wood, veneer, and solid surfaces. In addition, the electrostatic, open surface with spaces between the grains ensures uniform sanding and prevents clogging. The strong abrasive grains are resistant to wear, allowing for prolonged and repeated use. This product is intended for cleaning up and sanding paint, varnish, putty, primer and wood-based materials; it is suitable for intermediate sanding of lacquer on surfaces. It is also suitable for sanding after wetting certain materials as well as smoothing out feather edges. The fully synthetic resin-bonded grains provide a long lifespan. The extremely flexible C-/B- paper backing allows the product to be folded without cracking forming. Sandpaper C430 Expert for Wood and Paint fits multi-sanders.
Package of 5 pieces.

F355 Best for Coatings and Composites ensures an impressive finish when sanding and grinding abrasive surfaces and composite materials. Blades with silicon carbide abrasive grains ensure precise material removal for professional results. In addition, the electrostatic, open surface with spaces between the grains ensures uniform dust removal, preventing clogging. The sanding roll is developed for grinding hard materials such as stone and composite material as well as intermediate sanding in painting work. It is also suitable for sanding and grinding of varnish, paint, primer, putty and plastic. Also suitable for precision work on ferrous and non-ferrous materials. F355 Best for Coatings and Composites has a closed antistatic coating to reduce dust adhesion on the subject or machine. The abrasive grain is attached using a fully synthetic resin bond ensuring exceptional durability in tough tasks. The product's backing material is F/C paper to optimize its sanding properties.F355 Best for Coatings & Composites fits all common belt sander machines.
Package of 5 pieces.

F355 Best for Coatings and Composites ensures an impressive finish when sanding and grinding abrasive surfaces and composite materials. Blades with silicon carbide abrasive grains ensure precise material removal for professional results. In addition, the electrostatic, open surface with spaces between the grains ensures uniform dust removal, preventing clogging. The sanding roll is developed for grinding hard materials such as stone and composite material as well as intermediate sanding in painting work. It is also suitable for sanding and grinding of varnish, paint, primer, putty and plastic. Also suitable for precision work on ferrous and non-ferrous materials. F355 Best for Coatings and Composites has a closed antistatic coating to reduce dust adhesion on the subject or machine. The abrasive grain is attached using a fully synthetic resin bond ensuring exceptional durability in tough tasks. The product's backing material is F/C paper for optimal sanding properties.F355 Best for Coatings and Composites-sanding sheet fits all common flat grinders.
Package of 5 pieces.

Schleifpapier

Reinigungsset mit 2 Teilen.

C470 Best for Wood and Paint has an exceptionally high material removal rate. The product's calcium stearate coating prevents clogging. Additionally, the electrostatic, open surface with spaces between the grains ensures uniform, controlled and consistent dust removal. The sanding sheet is developed for sanding wood and coatings such as lacquer, putty layers, spackle as well as synthetic and solid materials such as polymers (Corian, Varicor). The product is made of C/B paper covered with strong semi-open aluminum oxide abrasive grains that ensure consistent quality. Quick replacement and easy handling thanks to the hook-and-loop closure system. C470 Best for Wood and Paint sanding sheet fits all common orbital sanders.
Package of 50 pieces.

Y580 Best for Inox has an excellent speed for removing material on Inox surfaces. The stable X-cloth back is stable and durable during the grinding process and guarantees impressive surface results. In addition, the abrasive grains of zirconia aluminum ensure impressive fast material removal as well as high wear resistance. The additional cooling ensures seamless grinding without discoloration of the subject. Designed for general use with difficult metal materials, including welding and joints, and for sanding scale skin. Also suitable for stainless steel and titanium as well as non-ferrous metals. The sanding sheet is characterized by electrostatic, compact grain distribution and cooling additives that ensure optimal sanding properties on metal surfaces. The abrasive grain is attached using a fully synthetic resin bond on X-cloth, ensuring high stability and wear resistance as well as quick removal of material in demanding tasks. The Y580 Best for Inox sanding belt fits a belt sander